• 한국융합학회논문지
• /
• 제10권11호
• /
• pp.85-93
• /
• 2019

한국은 반도체 산업에서의 독보적 우위에도 불구하고, 반도체 장비 분야에서는 두각을 나타내지 못하고 있다. 세정장비는 반도체 장비 중 한 분야로, 반도체 기술의 고도화에 따라 향후 중요성이 더욱 강조되는 분야이다. 본 연구는 특허 정보를 분석하여 한국을 포함한 주요 국가별 세정장비 분야 기술경쟁력을 파악하고 국가별 중점 기술분야를 살펴보고자 하였다. 이를 위해 최근 10년 간 미국 특허청에 등록된 세정장비 특허를 검색하여, 정량적 특허분석 및 특허 동시분류 네트워크 분석을 실시하였다. 연구 결과, 미국과 일본이 이 분야 기술을 선도하고 있는 것으로 나타났으며, 한국은 이들 선도국에 비해 경쟁력이 크게 뒤쳐짐은 물론, 경쟁국인 대만이나 후발국인 중국에 비해서도 우위에 있다고 보기 어려운 상황이다. 또한 국가별 전문화가 진행되어 있어, 국가 간 협력체제가 원활치 못할 경우 기술장벽으로 작용할 가능성도 없지 않다. 따라서 국내 세정장비 산업의 발전을 위한 적극적인 연구개발과 기술역량 확충이 요구된다.

• 융합신호처리학회 학술대회논문집
• /
• 한국신호처리시스템학회 2000년도 추계종합학술대회논문집
• /
• pp.41-44
• /
• 2000

본 논문에서는 동아대학교 RRC에서 개발한 게이트 자동화 시스템에 적용된 DSRC(Dedicated Short Range Communication) 시스템을 항만 내 야드 자동화에서도 이용하기 위해 이동 수송 차량에 장착되는 OBE(On-Board Equipment)와 야드에 설치되는 RSE(Road Side Equipment)간의 통신 소프트웨어 알고리즘을 제안하였다. 컨테이너 야드와 하역 시스템의 자동화를 구현하기 위해 OBE와 RSE간을 DSRC 방식으로 통신할 때 통신 대상에 따른 송수신 정보의 분류, 통신 대상의 분류 및 특성을 분석하였다.

• 한국산업융합학회 논문집
• /
• 제25권4_2호
• /
• pp.603-609
• /
• 2022

Bottom hole assembly(BHA) is a key component of the drilling system, consisting of various components and tools(including the drill bit and mud motor) which operate at the bottom of the wellbore and physically drill the rock. This paper investigates the dynamic characteristics of the mud motor which is a drilling propulsion tool. And computational structural analysis is performed to calculate the von-Mises stress and the safety factor of components constituting the mud motor. In this process, the field test data of onshore drilling are used for analysis.

• 반도체디스플레이기술학회지
• /
• 제21권4호
• /
• pp.81-85
• /
• 2022

Mist-CVD is known to have advantages of low cost and high productivity method since the precursor solution is misting with an ultrasonic generator and reacted on the substrate under vacuum-free conditions of atmospheric pressure. However, since the deposition distribution is not uniform, various efforts have been made to derive optimal conditions by changing the angle of the substrate and the position of the outlet to improve the result of the preceding study. Therefore, in this study, a deposition distribution uniformity model was derived through the shape and position of the substrate support and the conditions of inlet flow rate using the particle tracking method of computational fluid dynamics (CFD). The results of analysis were compared with the previous studies through experiment. It was confirmed that the rate of deposition area was improved from 38.7% to 100%, and the rate of deposition uniformity was 79.07% which was higher than the predicted result of simulation. Particle tracking method can reduce trial and error in experiments and can be considered as a reliable prediction method.

• 반도체디스플레이기술학회지
• /
• 제21권3호
• /
• pp.101-104
• /
• 2022

Mist-CVD is known to have advantages of low cost and high productivity compared to ALD and PECVD methods. It is capable of reacting to the substrate by misting an aqueous solution using ultrasonic waves under vacuum-free conditions of atmospheric pressure. In particular, Ga₂O₃ is regarded as advanced power semiconductor material because of its high quality of transmittance, and excellent electrical conductivity through N-type doping. In this study, Computational Fluid Dynamics were used to predict the uniformity of the thin film on a large-area substrate. And also the deposition pattern and uniformity were analyzed using the flow velocity and particle tracking method. The uniformity was confirmed by quantifying the deposition cross section with an FIB-SEM, and the consistency of the uniformity prediction was secured through the analysis of the CFD distribution. With the analysis and experimental results, the match rate of deposition area was 80.14% and the match rate of deposition thickness was 55.32%. As the experimental and analysis results were consistent, it was confirmed that it is possible to predict the deposition thickness uniformity of Mist-CVD.

• Design & Manufacturing
• /
• 제16권1호
• /
• pp.43-49
• /
• 2022

As technologies in various industrial fields develop, high-quality parts are required. In the past, precision parts were produced by the contact machining method, but the contact machining method has clear limitations. In order to solve this problem, research on a non-contact processing method has been conducted, and laser processing and electric discharge processing are representative. However, the non-contact method has a problem in that productivity is insufficient, and there is a problem that it takes a lot of time to continuously process microholes. Researchers have developed an electron beam drilling equipment for continuous processing of fine holes, and a vaporization amplification sheet to increase the processing efficiency of the equipment. In this study, a cylindrical vaporization amplification sheet using room temperature curing type silicon was fabricated, and the metal distribution and thickness uniformity of the produced sheet were analyzed. In order to manufacture a cylindrical vaporization amplification sheet, an equipment capable of using centrifugal force was developed, and a sample in which metal powder was evenly distributed and a constant thickness was produced.

• 대한기계학회논문집A
• /
• 제35권9호
• /
• pp.1063-1070
• /
• 2011

생산시스템은 다양한 제품을 특정 공정에 따라 생산되며, 이는 다양한 생산 데이터를 발생시킨다. 이러한 데이터를 효율적으로 관리하기 위해 제조실행시스템(MES)과 같은 생산관리시스템이 사용된다. MES에서 가장 중요한 항목은 생산설비에서 발생되는 설비데이터를 작업자의 간섭 없이 직접적으로 수집하는 시스템이다. 본 논문에서는 생산현장에서 발생하는 다양한 정보를 실시간으로 수집하기 위한 데이터 수집 방법으로 범용기계에 적용 가능한 센서를 이용한 방법과 자동화 기계에 적용 가능한 PLC를 이용한 데이터수집 방법을 제안하였다. 제안된 데이터 수집시스템은 실제 생산시스템에 적용하여 효율성을 검증하였다. 제조 현장에서 설비의 상태데이터를 수집하는 시스템을 활용하여 실시간으로 현장정보를 제공할 수 있는 MES를 구현할 수 있다.

• 한국지역사회생활과학회지
• /
• 제28권3호
• /
• pp.377-390
• /
• 2017

This study identified technological trends through an analysis of patents for the industrialization of personal protection and convenience equipment using information and communication technology (ICT) as a part of efforts to prevent farm work-related disasters. The analysis was conducted on patents registered and published between January 1974 and May 2016 by the world's five largest intellectual property offices, including the KIPO, USPTO, JPO, EPO, and SIPO. The results of the analysis indicate that the US (36.8%) and South Korea (30.9%) led technological research and development (R&D) with frequent patent applications. An analysis of the technological market revealed that these countries are in the growth and maturity stages, in which the number of patents and number of patent applicants grow rapidly. In terms of the technological market shares of major countries, the US recorded the highest market shares in the field of sensing systems for workers' dangerous conditions and convenience protection equipment based on the internet of things (IoT) convergence. South Korea marked the highest share of 41.8% in the field of sensing devices for dangerous conditions in the working environment. An analysis of the trend of patent applications by specific technologies disclosed the following results: sensing systems for workers' dangerous conditions accounted for the highest share (49.2%), followed by IoT convergence-based convenience protection equipment (26.3%) and sensing devices for dangerous conditions in the working environment (24.6%). Based on this study, ICT-based personal protection and convenience equipment technologies are expected to be actively developed in the future. It will be necessary to secure national competitiveness through R&D investments and commercialization in personal protection and convenience equipment appropriate for farm work as well as through the acquisition of patent technologies and intellectual property rights.

• ETRI Journal
• /
• 제34권3호
• /
• pp.297-307
• /
• 2012

A femtocell is a small cellular base station, typically designed for use in a home or small business. The random deployment of a femtocell has a critical effect on the performance of a macrocell network due to co-channel interference. Utilizing the advantage of a multiple-input multiple-output system, each femto base station (FBS) is able to form a cluster and generates a precoding matrix, which is a modified version of conventional single-cell block diagonalization, in a cooperative manner. Since interference from clustered-FBSs located at the nearby macro user equipment (MUE) is the dominant interference contributor to the coexisting networks, each cluster generates a precoding matrix considering the effects of interference on nearby MUEs. Through simulation, we verify that the proposed algorithm shows better performance respective to both MUE and femto user equipment, in terms of capacity.

• 융합정보논문지
• /
• 제9권11호
• /
• pp.118-124
• /
• 2019

무인항공기의 기술이 많이 보급화 되면서 다양한 종류의 무인항공기 및 임무 다변화에 따라 다양한 종류의 임무 장비가 개발되고 있다. 그중에서도 국내에서는 소형 무인항공기가 활발히 개발되고 있으며 소형 무인기의 효과적인 조정을 위한 비행제어 시스템과 임무 장비의 연동 시스템이 필요하고, 또한 데이터를 처리하여 지상 운용시스템으로 전송을 위한 효율적인 통신장비의 구성 및 운용이 요구되고 있다. 본 논문에서는 소형 무인항공기의 임무 및 제어를 위하여 비행제어 시스템과 임무 장비 제어 시스템을 이용한 임무 장비의 확장, 데이터 링크 통합 및 통신장비 운용에 대하여 서술하였으며 이를 통하여 효과적인 소형 무인항공기의 운용에 대하여 정리하였다.