Design & Manufacturing

Korean Society of Die & Mold Engineering (한국금형공학회)
권호 표지

A study on the manufacture of cylindrical vaporization amplification sheets using centrifugal force

원심력을 이용한 원통형 증기화 증폭 시트 제작 연구

  • Ko, Min-Sung (Department of Mechanical Convergence Engineering, Induk University) ;
  • Wi, Eun-Chan (Department of Mechanical Convergence Engineering, Induk University) ;
  • Yun, Yi-Seob (Department of Mechanical Convergence Engineering, Induk University) ;
  • Lee, Joo-Hyung (Department of Mechanical System and Design Engineering, Seoul National University of Science and Technology) ;
  • Baek, Seung-Yub (Department of Mechanical Convergence Engineering, Induk University)
  • 고민성 (인덕대학교 융합기계공학과) ;
  • 위은찬 (인덕대학교 융합기계공학과) ;
  • 윤이섭 (인덕대학교 융합기계공학과) ;
  • 이주형 (서울과학기술대학교 기계설계로봇공학과) ;
  • 백승엽 (인덕대학교 융합기계공학과)
  • Received : 2022.03.06
  • Accepted : 2022.03.31
  • Published : 2022.03.31
Download PDF
⟨ Previous Next ⟩

Abstract

As technologies in various industrial fields develop, high-quality parts are required. In the past, precision parts were produced by the contact machining method, but the contact machining method has clear limitations. In order to solve this problem, research on a non-contact processing method has been conducted, and laser processing and electric discharge processing are representative. However, the non-contact method has a problem in that productivity is insufficient, and there is a problem that it takes a lot of time to continuously process microholes. Researchers have developed an electron beam drilling equipment for continuous processing of fine holes, and a vaporization amplification sheet to increase the processing efficiency of the equipment. In this study, a cylindrical vaporization amplification sheet using room temperature curing type silicon was fabricated, and the metal distribution and thickness uniformity of the produced sheet were analyzed. In order to manufacture a cylindrical vaporization amplification sheet, an equipment capable of using centrifugal force was developed, and a sample in which metal powder was evenly distributed and a constant thickness was produced.

Keywords

Acknowledgement

본 논문은 산업통상자원부 기계장비산업기술개발 제조장비실증 사업의 "고속 미세 홀 가공 및 절단 가공을 위한 전자빔 장비 실증" 과제번호 (20014749) 연구비 지원으로 진행되었습니다. 이에 감사를 드립니다.

References

  1. Lee, E. S., Baek, S. Y., & Cho, C. R., "A study of the characteristics for electrochemical micromachining with ultrashort voltage pulses", The International Journal of Advanced Manufacturing Technology, 31(7), pp. 762-769, 2007. https://doi.org/10.1007/s00170-005-0247-y
  2. Kumar, K., & Agarwal, S., "Multi-objective parametric optimization on machining with wire electric discharge machining", The International Journal of Advanced Manufacturing Technology, 62(5), pp. 617-633, 2012. https://doi.org/10.1007/s00170-011-3833-1
  3. Quazi, M. M., Ishak, M., Fazal, M. A., Arslan, A., Rubaiee, S., Qaban, A., & Manladan, S. M., "Current research and development status of dissimilar materials laser welding of titanium and its alloys", Optics & Laser Technology, p. 126, 106090, 2020.
  4. Kim, S. H., Jung, S. T., Kim, H. J., & Baek, S. Y., "A study on machining characteristics in vaporized amplification sheets of electron beam", Journal of the Korea Society of Die & Mold Engineering, 12(2), pp. 46-50, 2018.
  5. Kim, H. J., Jung, S. T., Lee, J. H., ... & Baek, S. Y., "Analysis of machining characteristics of thermogravimetric analysis and high-power density electron beam through the development of vaporized amplification sheets according to metal powder", Journal of the Korea Society of Die & Mold Engineering, 14(1), pp. 56-62, 2020.
  6. Kim, H. J., Jung, S. T., Wi, E. C., Lee, J. H., Kang, J. G., Kim, J. S., ... & Baek, S. Y., "Machining experimental and characteristic analysis of vaporized amplification sheets according to selection of high-power density electron beam drilling parameters", Journal of the Korea Society of Die & Mold Engineering, 14(2), pp. 62-68, 2020.
  7. Kim, H., Jung, S., Lee, J., & Baek, S., "A study on multi-hole machining of high-power density electron beam using a vaporized amplification sheet", The International Journal of Advanced Manufacturing Technology, 115(5), pp. 1411-1419, 2021. https://doi.org/10.1007/s00170-021-07046-x
  8. Jung, S. T., Kang, E. G., Park, J. W., Kim, T. W., & Baek, S. Y., "A Study on Proposal of E-Beam Drilling Machining Criterion by Using on Vaporized Amplification Sheets in a High-Power Density Electron Beam", Journal of Nanoscience and Nanotechnology, 20(7), pp. 4231-4234, 2020. https://doi.org/10.1166/jnn.2020.17548
  9. Kim, S. H., Jung, S. T., Kim, H. J., Baek, S. Y., Kim, J. S., & Kang, E. G., "A study on the preparation method of vaporized amplification sheets and electron beam machining characteristics", Journal of Manufacturing Processes, 50, pp. 234-240, 2020. https://doi.org/10.1016/j.jmapro.2019.12.046