• Mycobiology
• /
• v.31 no.1
• /
• pp.50-53
• /
• 2003

Perforated vinyl mulching technique was performed on oyster mushroom beds for controlling mushroom diseases. Mycelium under vinyl sheets were safely protected from outside undesirable microorganisms. One of two mushroom farms showed 75% of disease incidence, the other 40% and National Institute of Agricultural Science and Technology(NIAST) 13% in the conventional growing method, whereas 12%, 14%, and 5% in the vinyl mulching cultivation method. Waterlogging caused mushroom bed worse, and Trichoderma spp. were infested on the conventional mushroom bed. Disease incidence investigated in other case was 25% to 30% in the conventional growing method, whereas 5 to 9% in the vinyl mulching cultivation method. Yields in conventional method were 6.5 to 7.2 $kg/m^2$ and those in vinyl mulching method were 7.6 to 8.1 $kg/m^2$. So it was suggested that vinyl mulching technique was good for prevention from disease and elevation of productivity.

• Journal of the Korean Ceramic Society
• /
• v.29 no.7
• /
• pp.539-543
• /
• 1992

The continuous growth method was developed for Mn-Zn Ferrite single crystals. It is a new process that the polycrystalline MnχZn1-χFe2O4 raw materials are supplied continuously from the powder feeding system to the crucible heated by R.F. induction and melted in the crucible, and after the single crystals seed is attached to crucible's hole, the crystals are pulled downward with rotation. Growing the crystals by using the growth method different from the conventional Bridgman or Floating Zone method, we defined the factors having effect on the crystal growing through the pre-experiments. They are temperature distribution in the crucible, melt velocity according to its height, wettability between the crucible's bottom and melt. Therefore, Mn-Zn Ferrite single crystals were to be grown by attaining the appropriate melt height in the crucible, powder feeding rate, temperature gradient between the crucible and interface, crystal growing speed, and this method was confirmed to have possibility for single crystal growing.

• Journal of the Korean Society of Tobacco Science
• /
• v.14 no.1
• /
• pp.42-47
• /
• 1992

This study was conducted to determine the effects of the bottom watering method on seedling growth, temperature of seedbed and working hours. The results of compared conventional watering with bottom watering were as follows: 1. The lowest and highest temperature on surface of bottom watering seedbed were higher about 2-3$^{\circ}C$ and 3-5$^{\circ}C$ than those of conventional plot, respectively. 2. At 30 days after seeding, flesh and dry weight of seedling in bottom watering seedbed were heavier about 121% and 62% than those of seedling in conventional plot, respectively, while dry ratio of that was lower about 30.2%. 3. Plant height of transplanting seedling in bottom watering seedbed was higher about 4-5cm than that of seedling in conventional plot. Otherwise, ratio of top to root and length of root were not significant. 4. Working hours of bottom watering for growing seedling were reduced 40.9% and 53.4% in primary and secondary seedbeds as compared with those of conventional plot, respectively.

• Journal of International Society for Simulation Surgery
• /
• v.1 no.2
• /
• pp.75-79
• /
• 2014

Purpose The region growing has a critical problem that it often extract vessels with unexpected objects such as a bone which has a similar intensity characteristics to the vessel. We propose the new method to extract arterial vascular anatomy around the stomach from the CTA volume without the post-processing. Materials and Methods Our method, which is also based on the region growing, requires the two seed points from the use. I automatically extracts perigastric arteries using the adaptive region growing method and it does not need any post-processing. Results The three region growing based methods are used to extract perigastric arteries - the conventional region growings with restrict and loose thresholds each and the proposed method. The 3D visualization from the result of our method shows our method extracted the all required arteries for gastric surgery. Conclusion By extracting perigastric arteries using the proposed method, over-segmentation problem that unexpected anatomical objects such as a rib or backbone are also segmented does not occurs anymore. The proposed method does not need to sensitively determine the thresholds of the similarity function. By visualizing the result, the preoperative simulation of arterial vascular anatomy around the stomach can be possible.

• Journal of Korea Multimedia Society
• /
• v.16 no.9
• /
• pp.1031-1043
• /
• 2013

Extracting hand region from images is the first part in the process to recognize hand posture and gesture interaction. Therefore, a good segmenting method is important because it determines the overall performance of hand recognition systems. Conventional hand segmentation researches were prone to changing illumination conditions or limited to the ability to detect multiple people. In this paper, we propose a robust technique based on the fusion of skin-color data and depth information for hand segmentation process. The proposed algorithm uses skin-color data to localize accurate seed location for region-growing from a complicated background. Based on the seed location, our algorithm adjusts each detected blob to fill up the hole region. A region-growing algorithm is applied to the adjusted blob boundary at the detected depth image to obtain a robust hand region against illumination effects. Also, the resulting hand region is used to train our skin-model adaptively which further reduces the effects of changing illumination. We conducted experiments to compare our results with conventional techniques which validates the robustness of the proposed algorithm and in addition we show our method works well even in a counter light condition.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.17 no.1
• /
• pp.59-66
• /
• 1997

This experiment was conducted at the forage experimental field, College of Agriculture and Life Sciences, Seoul National University, Suweon in 1992 and 1993 to investigate the effects of tillage method-conventional and rotary-till, rye (Secde cereale L.) harvest date-early (April 14) and late (April 26), and rye residue treatmentno paraquat(1, 1-dinethyl-4,4'-bipyridinium dichloride) and paraquat in minimizing the adverse effects of the rye residue on growth and yield of succeeding corn(Zea mays L.). Corn plant height during the growing season was slighly taller with conventional tillage relative to rotary-till when rye was harvested in early and treated by paraquat. Corn LA1 during the growing season was slighly increased when rye was harvested in early and where conventional tillage was used with paraquat treatment. There were no differences in the leaf number and silking dates of corn among the tillage methods, harvest dates of rye and paraquat treatments. The dry matter yield of corn was significantly increased by paraquat treatment when rye was harvest in early, but no differences were found in the dry matter percentage, ear percent to total dry matter, and stover, ear and estimated TDN yields of corn among the treatments.

• Korean Journal of Oriental Medicine
• /
• v.16 no.2
• /
• pp.43-55
• /
• 2010

Objective : There is a growing interest on Complementary and Alternative Medicine(CAM). But the term 'CAM' often causes confusion, for the perception of CAM is determined by how the relationship between CAM and Conventional Medicine is established. Methods : In this paper, we researched the concept of CAM through the change in the terminology and definition of CAM throughout history. Furthermore, we also analyzed related papers in Korea. Results : International studies show that the relationship between Conventional Medicine and CAM has become more cooperative. Meanwhile, in Korea, Korean Medicine is categorized as a type of Conventional Medicine, not CAM. Conclusion : Though Korean Medicine is included in Conventional Medicine in Korea, the research methodology is still restricted in ways of bio-medical science. Further study on the original research method of Korean Medicine is needed.

• Proceedings of the KOSOMBE Conference
• /
• v.1997 no.05
• /
• pp.116-118
• /
• 1997

In hippocampal morphology Abnormalities, including unilateral or bilateral volume loss, are known to occur in epilepsy, Alzheimer's disease, and in certain amnestic syndromes. To detect such abnormalities in hippocampal morphology, we present a method that combines region growing and dynamic contour model to detect hippocampus from MRI brain data. The segmentation process is performed two steps. First region growing with a seed point is performed in the region of hippocampus and the initial contour of dynamic contour model is obtained. Second, the initial contour is modified on the basis of criteria that integrate energy with contour smoothness and the image gradient along the contour. As a result, this method improves fairly sensitivity to the choice of the initial seed point, which is often seen by conventional contour model. The power and practicality of this method have been tested on two brain datasets. Thus, we have developed an effective algorithm to extract hippocampus from MRI brain data.

• Agricultural and Biosystems Engineering
• /
• v.5 no.2
• /
• pp.50-54
• /
• 2004

The study aimed to develop a mechanized mushroom growing system for the substrate materials mixing and wetting, materials fermentation and pasteurisation through the design of integrated cultivation machine system for oyster mushroom. The power requirement of the prototype during fermentation operation was measured in the range of 31$\~$33 kg-m and the torque has not so much differ by the kinds and quantity of materials. The work efficiency of conventional method for stacking the heap and turning the heap of cotton waste by tractor rotavator and manual wetting required 78 hours. But the watering, fermentation and sterilisation by the prototype use same operation required 25.5 hours, which can save the operation labour by $67\%$. The machine can be saved the requirement of heating energy by $63\%$, and the machine can also be saved the material cost by $44\%$. It is envisaged that the machine can effectively be used for large mushroom growing farms or joint use mushroom growing group-farmers in a village.

• Korean Journal of Remote Sensing
• /
• v.20 no.3
• /
• pp.215-225
• /
• 2004

A multistage hierarchical clustering technique, which is an unsupervised technique, was suggested in this paper for classifying large remotely-sensed imagery. The multistage algorithm consists of two stages. The 'local' segmentor of the first stage performs region-growing segmentation by employing the hierarchical clustering procedure of CN-chain with the restriction that pixels in a cluster must be spatially contiguous. The 'global' segmentor of the second stage, which has not spatial constraints for merging, clusters the segments resulting from the previous stage, using the conventional agglomerative approach. Using simulation data, the proposed method was compared with another hierarchical clustering technique based on 'mutual closest neighbor.' The experimental results show that the new approach proposed in this study considerably increases in computational efficiency for larger images with a low number of bands. The technique was then applied to classify the land-cover types using the remotely-sensed data acquired from the Korean peninsula.