• 제목/요약/키워드: Conventional combustion

검색결과 449건 처리시간 0.026초

희박연소를 이용한 가스터빈 연소기의 저 $NO_{x}$ 특성 (The Low $NO_{x}$ Characteristics of a Lean Premixed Gas Turbine Combustor)

  • 손민규;안국영;김한석;김용모
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2001년도 춘계학술대회논문집D
    • /
    • pp.66-70
    • /
    • 2001
  • The combustion characteristics have been investigated to develop the low $NO_{x}$ gas turbine combustor. The lean premixed combustion technology was applied to reduce the $NO_{x}$ emission. Also, the conventional combustor was designed and tested for the baseline of low $NO_{x}$ combustor performance. The test was conducted at the condition of high temperature and ambient pressure. The combustion air which has the temperature of 500K were supplied to the combustor through the air preheater. The temperature and emissions of $NO_{x}$ and CO were measured at the exit of combustor. The premixing chamber can be operated very lean condition of equivalence ratio around 0.35. The $NO_{x}$ was decreased with decreasing the equivalence ration. The CO was decreased with decreasing the equivalence ratio, but the CO was increased with decreasing the equivalence ratio below 0.45. But, at the very lean condition of equivalence ratio below 0.35 both NOx and CO were increased because of the flame unstability. The $NO_{x}$ was decreased slightly and CO was increased with increasing inlet air flowrate. This results can be used to determine the size of combustor. The low $NO_{x}$ combustor has lower values of $NO_{x}$ and CO compared with conventional one. Consequently the performance of combustor shows the possibility of the application to the gas turbine system.

  • PDF

선박 디젤유 및 선박 디젤유 에멀젼을 이용한 자동차용 디젤엔진의 연소특성 (Combustion Characteristics of MDO and MDO Emulsion in Automotive Diesel Engine)

  • 박진규;오정모;김형익;이창희;이기형
    • 대한기계학회논문집B
    • /
    • 제36권9호
    • /
    • pp.945-951
    • /
    • 2012
  • 물 에멀젼 연료는 연소과정 중 물의 기화에 따른 증발잠열 흡수로 인한 연소온도 저하와 급격한 증발에 의한 미소폭발로 인하여 연료가 미립화되어 NOx와 Soot의 동시 저감이 가능하고, 전처리 및 후처리 기술과 달리 추가적인 장치가 필요하지 않으며, 별도의 개조 없이 기존 디젤엔진에 사용 가능하므로 이에 관한 연구가 주목 받고 있다. 또한 국제유가가 상승함에 따라 기존에 사용되는 연료보다 저등급의 연료를 엔진에 사용하기 위한 적용가능성에 대한 연구가 요구되고 있다. 따라서 본 연구는 기존의 경유보다 저 등급인 선박 디젤유와 물과 선박 디젤유를 혼합한 유중수적형(W/O:water in oil)의 선박 디젤유 에멀젼 연료를 자동차 디젤엔진에 적용하여 기본 연소특성 및 배기특성을 파악하였다.

Study on Emission Control for Precursors Causing Acid Rain (VI) : Suitability of Aquatic Plant Biomass as a Co-combustion Material with Coal

  • Hauazawa, Atsushi;Gao, Shidong;Sakamoto, Kazuhiko
    • Asian Journal of Atmospheric Environment
    • /
    • 제2권2호
    • /
    • pp.102-108
    • /
    • 2008
  • In China, energy and environmental problems are becoming serious owing to rapid economic development. Coal is the most problematic energy source because it causes indoor and outdoor air pollution, acid rain, and global warming. One type of clean coal technology that has been developed is the coal-biomass briquette (or bio-briquette, BB) technique. BBs, which are produced from pulverized coal, biomass (typically, agricultural waste), and a sulfur fixation agent (slaked lime, $Ca(OH)_2$) under high pressure without any binder, have a high sulfur-fixation effect. In addition, BB combustion ash, that is, the waste material, can be used as a neutralization agent for acidic soil because of its high alkalinity, which originates from the added slaked lime. In this study, we evaluated the suitability of alternative biomass sources, namely, aquatic plants, as a BB constituent from the perspective of their use as a source of energy. We selected three types of aquatic plants for use in BB preparation and compared the fuel, handling, and environmental characteristics of the new BBs with those of conventional BBs. Our results showed that air-dried aquatic plants had a higher calorific value, which was in proportion to their carbon content, than agricultural waste biomass; the compressive strength of the new BBs, which depends on the lignin content of the biomass, was high enough to bear long-range intracontinental transport in China; and the new BBs had the same emission control capacity as the conventional BBs.

N2O 플라즈마 점화 하이브리드 로켓에 대한 실험적 연구 (Experimental Study of N2O Plasma Igniter for PMMA Combustion)

  • 김명진;김태규
    • 한국추진공학회지
    • /
    • 제23권3호
    • /
    • pp.1-8
    • /
    • 2019
  • 아산화질소($N_2O$) 열분해를 위해 아크 플라즈마를 이용한 점화 실험을 수행하였다. 기존의 점화기들은 신뢰성 및 즉각적인 응답을 얻기 어렵다는 단점을 해결하기 위한 방안으로 플라즈마를 활용하는 방안을 제시하고자 하며, 점화기로써의 가능성을 보기 위해 가스 온도 측정 및 연소 실험을 수행하였다. 1 g/s, 0.7 A 조건에서 가장 안정적인 방전 특성을 보였으며 이때 측정된 벽면 부근의 온도는 약 $960^{\circ}C$이었다. 이를 바탕으로 하이브리드 로켓 연소 실험을 수행하였다. 플라즈마 방전 이후 약 3.1 sec만에 총 유량 10 g/s의 메인 연소가 성공적으로 이루어졌으며 점화에 필요한 플라즈마 발생을 위한 에너지 소모량은 1,780 J이었다.

대중적 환경차를 위한 주조를 이용한 서포트링 제작에 관한 연구 (A Study on the Production of Supporting Ring Using Casting for Public Environmental Vehicles)

  • 이정익
    • 미래기술융합논문지
    • /
    • 제2권3호
    • /
    • pp.17-24
    • /
    • 2023
  • 하이브리드 자동차를 연구로 목적으로 논문을 설계합니다. 히이브리드 자동차는 내연 기관과 배터리 엔진을 동시에 장착하여 기존의 일반 차량에 비해 연비와 유해가스 배출량을 획기적으로 줄인 차세대 자동차로 전기모터는 차량 내부에 장착된 고전압 배터리로부터 전원을 공급받고, 배터리는 자동차가 움직일 때 다시 충전되는 시스템을 가진 차를 연구로 기존 자동차의 에너지 손실은 대부분 교통 혼잡에 따른 공회전을 보완해 차량의 속도나 주행 상태 등에 따라 시간과 차량 정지시 발생하는데 하이브리드 시스템은 이 같은 가솔린 또는 디젤 엔진의 단점엔진과 모터 힘을 적절하게 제어함으로써 효율성을 극대화시킨 차라고 할 수 있다. 하이브리드 차는 연비 개선, 환경 친화성, 경제성, 노이즈 감소 등 다양한 장점을 가지고 있어서 점차 많은 사람들에게 선택되고 있는 대안적인 자동차 옵션입니다. 해당 연구를 통해 환경오염을 방지하고 미래 자동차 연구를 위해 노력을 기울일수 있을 것입니다.

PDE 기반 PGC 추진기관 시스템 연구 동향 (Research Activities on PGC Propulsion Systems based on PDE)

  • 김지훈;김태영;진완성;최정열
    • 한국항공우주학회지
    • /
    • 제42권10호
    • /
    • pp.858-869
    • /
    • 2014
  • 대부분의 항공우주 추진은 정압 Brayton 사이클에 기초하고 있으나 성능 향상을 위한 압력비 증가는 기계적 한계에 직면하고 있다. 지난 십여 년간 고속 추진에 적합한 연소방식으로 기대 받은 데토네이션 추진이, 최근에는 추진기관과 동력 장치의 열효율을 획기적으로 증대시켜 줄 수 있는 "game-changer"로 연구되고 있다. 즉, 데토네이션 파에 수반하는 강한 충격파의 압축 효과는 기존의 압축 방식에서 얻기 힘든 열효율을 증가시키는 것으로 여겨진다. 본 논문에서는 펄스데토네이션엔진의 최신 기술 동향과 더불어 정적연소에 기초한 압력증가연소 체계의 연구 동향에 대하여 소개할 것이다.

관류보일러 연소실에서 비예혼합 VIStA 버너의 연소 특성 (Combustion Characteristics of Non-premixed VIStA Burner in Once-Through-Type Boiler)

  • 안준;김혁주;최규성
    • 대한기계학회논문집B
    • /
    • 제34권5호
    • /
    • pp.547-552
    • /
    • 2010
  • 본 연구에서는 VIStA(Vortex Inertial Staged Air) 버너를 개조하여 관류보일러에 적용하였다. 개조는 크게 2가지 부분에서 이루어 졌는데, 먼저 원형에서 채택한 예혼합 연소 방식을 사용상 편의와 안전을 위해 비예혼합방식으로 변경하였다. 연소 방식의 변경에 따라 공기 1차, 2차에 별도의 송풍기를 사용하던 공급 방식도 변경하여 본 연구에서는 하나의 송풍기로부터 공기를 공급받아 댐퍼를 통하여 1, 2차 연소실에 분할하여 공기를 공급하도록 하였다. 본 연구에서는 질소 산화물(NOx)의 생성을 억제하는 최적의 운전 조건을 찾기 위하여 전체 공기비 및 1, 2차 연소실로의 공기 분배 비율에 따른 NOx 생성 특성을 관찰하였다. 본 연구에서 산업용 보일러에 적용하기 위해 개조한 비예혼합 방식의 VIStA 버너를 설치한 결과, 기존의 일반 버너에 비해 균일한 화염을 얻었고 질소 산화물을 최대 20%까지 줄일 수 있는 것을 확인하였다.

레이저 유도 플라즈마 분광분석법을 이용한 연소 가스 온도 측정 기술 (Measurement of combustion gas temperature using laser-induced breakdown spectroscopy)

  • 이석환;김용규;강웅;정욱철;이주현;김성훈;양인영
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2017년도 제48회 춘계학술대회논문집
    • /
    • pp.285-289
    • /
    • 2017
  • 레이저 유도 플라즈마 분광분석법 (Laser-induced breakdown spectroscopy : LIBS) 은 기존의 레이저 기반의 연소 진단 기법들의 약한 신호세기, 복잡한 장비 구성, 낮은 정확도 등의 단점을 보완하는 기법이다. 본 연구에서는 LIBS를 활용하여 스크램 제트 엔진의 연소 가스 온도를 측정하기 위한 기초 연구가 수행되었다. 스크램 제트 엔진에서 사용되는 Jet A-1 연료로 스프레이 화염을 만들고 교정된 열전대로 화염 상부에서의 가스 온도를 측정하였다. 그리고 열전대의 온도 측정위치와 동일한 지점에서의 LIBS 신호를 획득하였다. LIBS 스펙트럼을 분석하여 LIBS 신호와 열전대로 측정된 기준 온도와의 보정곡선을 얻었다. 그래서 본 연구를 통해 LIBS를 활용하여 연소 가스의 온도를 in-situ 하게 측정할 수 있음을 확인하였다.

  • PDF

환경조건변화에 따른 응축성 가스상 물질의 거동특성 (Behaviour of Condensing Gaseous Species under Various Operating Conditions in a Combustion Facility)

  • 김용구;봉춘근;송규영;이명화
    • 한국대기환경학회지
    • /
    • 제29권5호
    • /
    • pp.634-641
    • /
    • 2013
  • Condensing species behaviour downstream of a combustor was discussed with particle size distribution in this study. The effects of operating conditions in a biomass combustion facility, i.e. concentration of condensing species, temperature gradient, residence time and injection of adsorbents, on particle size distribution were investigated. Pyroligneous liquid which was completely vaporized at the temperature higher than $350^{\circ}C$ was used as a representative of condensing gaseous species. We found that particle size downstream of a combustor increased with increasing heating temperature (i.e. concentration of condensing species) and residence time. However, temperature gradient was not an important factor to control the particle size. The addition of $SiO_2$ precursor as an adsorbent could effectively prevent the particle formation by adsorbing condensing gaseous species on $SiO_2$ particles, and increased the particle size up to 300 nm, resulting in increasing particle removal efficiency in a conventional air pollution control device.

램제트 연료 적용을 위한 보론의 연소에 대한 고찰 (A Study of the Boron Combustion for the Purpose of the Application for the Ramjet Fuel)

  • 이태호;이창환
    • 한국추진공학회지
    • /
    • 제19권6호
    • /
    • pp.72-80
    • /
    • 2015
  • 최근 기존의 통상적인 추진기관에서 새로이 공기 흡입 추진기관에 대한 관심이 커지고 있으며, 우리나라에서도 고체 램제트에 관한 기초 연구도 수행되는 등, 이 분야의 연구개발이 활발히 진행되고 있다. 고체 램제트의 연료에는 보론의 높은 열량 때문에 적용되고 있는데, 이 보론은 복잡한 연소 특성을 가지고 있어 이에 대한 연구도 많이 수행되어 오고 있다. 본 조사에서는, 램제트 연료 적용을 위하여 이러한 보론의 연소 특성을, 연구 개발되어 발표된 논문을 중심으로 하여 작성하였다.