This empirical study, activity-based costing, a newly introduced approach that has proved to be an improvement over the conventional costing system in product or service costing, is applied at department of clinical pathology in K university hospital. The study subjects were 233 test procedures done in clinical laboratory of K university hospital. Activity analysis was done by interview, questionnaires, and time study, and the amount of resources consumed by each activity and their costs are then traced and applied to the laboratory tests. The main purpose of this study were to compare the test costs of activity-bases costing with those of conventional costing, and test fees of medical insurance, and to provide accurate cost informations for the decision makers of hospital. The major findings of this study were as belows. 1. The cost drivers for application of activity-based costing at clinical laboratory were cases of sample collection, case of specimen, cases of test, and volume-related allocation bases such as direct labor hours and total revenue of each test. 2. The profits of each clinical laboratory fields analyzed by conventional costing were different from the profits analyzed by activity-based costing, especially in the field of Urinalysis(approximately over estimated 750%). 3. The standard full costs by conventional costing were quite different from the costs computed by using activity-based costing, and the difference is most significant with the tests of long labor time. 4. From the comparison between costs computed by using activity-based costing and medical insurance fees, some test fees were significantly lower than the costs, especially in the non-automated fields. As described in this study, activity-based costing provides more accurate cost information than does conventional costing system. The former approach is especially important in the health care industry including hospitals in which planning and controlling the costs services provided are the key to maintaining a healthy financial status for the organization. Despite the contribution of activity-based costing the economic as well as technical feasibilities of implementing such a cost accounting system in an organization must be evaluated. In the development of activity-based costing systems, an activity analysis has to be conducted to identify activities that consume resources. This involves a detailed study of the organization's logistics and accounting information systems, and it is an expensive project in itself. Besides, it can be quite difficult and time consuming to identify and trace resource consumption to a specific activity. Thus the activity-based costing system should be implemented only when the decrease in cost of error far exceeds the increase in cost of measurement. By combining activity-based costing with standard costing, health care administrators can better plan and control the costs of health services provided while ensuring that the organization's bottom line is healthy.
This research has a purpose to develop strategies for application and introduction of activitiy based costing for Korean hospitals. A 700 bed-sized general hospital in Taejon was chosen to conduct this study. The conventional costing and ABC methods were simultaneously applied to the Obstetrics & Gynecology department, using data surveyed from June 21 to 30, 1998. The difference of two costing methods' results were analyzed and ABC's superiority was recognized. It showed that the new ABC model was more rational, fair, and objective in allocating indirect costs. The strategies to introduce ABC model to hospitals were suggested as followings: 1)a committee to manage ABC should be organized; 2)education for the employees about costing and cost saving should be provided; 3)the computerized ABC program should be developed; and 4)more advanced and rigourous methods to identify activities and measure the resource consumption should be developed.
Proceedings of the Korean Operations and Management Science Society Conference
/
1996.04a
/
pp.481-484
/
1996
When logistics system is integrated with production system and marketing system, it takes a very important role of the business management. In general, measurement of logistics cost in logistics system uses the conventional cost assignment method. However the conventional method may result in the incorrect cost because the overhead cost may be incorrectly assigned to the products. Activity-Based Costing(ABC) was proposed as an alternative method which will distribute the overhead cost to each cost obeject more accurately. ABC assigns cost to activities based on the amounts of resources used by resource driver, and assigns cost to cost objects based on the amount of activities driver. This study proposes two heuristic algorithms. The first algorithm selects the best activity driver for each cost object by using correlation analysis. The best activity driver is the one that minimizes the sum of loss cost and measurement cost of activity driver. The second algorithm selects the best number of activities by using correlation analysis. The pair of activities with the highest correlation are combined into one if the saving of measurement cost is no less than the loss due to inaccurate distribution of overhead cost. In order to demonstrate the procedure and validity of the algorithms, Real data of one year from a paper manufacturer are used.
Korean Journal of Air-Conditioning and Refrigeration Engineering
/
v.15
no.5
/
pp.360-371
/
2003
The calculation of each unit cost of productions is very important for evaluating the economical efficiency and deciding the reasonable sale price. In the present, two methods of exergy costing on multiple energy systems are suggested to reduce the complexities of conventional SPECO method and MOPSA method and to improve the calculation efficiency of exergoeconomics. The suggested methods were applied to a gas-turbine cogeneration and the unit costs of the power and the steam energy were calculated as an example. The main points of our methods are the following three. First, one exergetic cost is applied to one cycle or system. Second, the suggested equations are the internal cost balance equation and the production cost balance equation. Third, necessary states in a system are only inlet and exit states of 1ha components producing energy.
Korean Journal of Construction Engineering and Management
/
v.16
no.4
/
pp.139-145
/
2015
Modular construction is combined with manufacturing production process and conventional construction industry technique. Considering characteristic of modular construction production process, manufacturing facilities require indirect costs for utilities, equipment, and overall maintenance, which can affect modular units pricing. However, current modular construction cost classification is inadvertent to reflect the manufacturing overhead costs, because it is generally added as a percentage to sum of labor, material and equipment as it called in single cost pool used. This process is easy to estimate the total construction cost at the project starting points, but it brings on misunderstanding of project profit estimations by "cross subsidization phenomenon". To prevent this situation, in this research aims to provide modular construction overhead cost handling process at the detailed indirect cost calculation for manufacturing stage using Activity-Based Costing as one of the powerful method for overhead costs estimation and allocation. Using this research results, modular construction cost estimators have more detailed cost information of modular units and prevent to misallocate indirect costs. Also, it can be utilized to aid the understanding of the company's profit structure.
A steel pallet to carry lighter logistic articles is developed based on the DFSS(design for Six Sigma) methodology. Combining the conventional DFSS(Design For Six Sigma) methodology with that of VE(Value Engineering) is the novel feature of this paper to achieve maximum cost reduction. In this paper, systematical steps to achieve the required structural spec's are presented by conventional DMEDI(Define-Measure-Explore-Develop-Implement) process. To imply the target costing, evaluation of functions consisting of the pallet has been performed by value methodology. Then best design concept is selected in the Explore step, following structural optimization utilizing FEM. Finally the performance of prototype is investigated by pilot test in the Implement step. The developed steel pallet is being commercialized in the fields of automated ware house.
Korean Journal of Construction Engineering and Management
/
v.13
no.4
/
pp.78-88
/
2012
As worldwide efforts to reduce global warming gases, the construction Industry is endeavoring to diminish carbon dioxides emissions. Especially, by introducing the LCA methodology to the industry, A variety of related studies to measure the emission of carbon dioxides have been conducted. However, when the conventional LCA methodology is applied to the construction projects, some limitations have been reported. To overcome the restrictions derived from the industry characteristics, this research suggested the Activity-based LCA model by applying the Activity-based Costing (ABC), which breaks down the whole life cycles into more detailed stages. By implementing the newly developed model, forecasting accuracy of $CO_2$ emission was elevated, and the critical control points on carbon dioxides were established. Through the case study of aluminium curtain-wall system, this research verified the usefulness of the Activity-based LCA.
Journal of the Korea Institute of Building Construction
/
v.22
no.5
/
pp.485-496
/
2022
Modular construction projects offer advantageous over conventional construction projects in the area of quality control through factory production. However, as clear standards and definitions for quality control activities have yet to be not established, it is difficult to judge the appropriateness of the scale of quality control costs, and it is also difficult to classify quality control activities by process stage. Therefore, in this study, a method for classifying quality management activities based on activity standards was presented, in addition to a method for classifying quality costs according to the PAF standards to check how effective the costs and activities are for quality control in the future. The findings of this study can be used to define the quality management activities for each stage of the modular construction project in the future, and to develop a database of evidence to determine the appropriateness of cost distribution accordingly.
Proceedings of the Korea Contents Association Conference
/
2006.11a
/
pp.474-477
/
2006
Recently, the needs for the virtual reality service of multimedia contents on the web are increasing. The services are provided by the parameter value of attribute informations of the contents. The Conventional method for managing the parameters is storing the informations separately for the contents, in this method managing and implementing the system are to be costing job. In this paper, a virtual reality service based on meta data is proposed. For the storing and managing the parameter information, we use the free space of the JPEG images. And for testing the effectiveness of the proposed system, we implemented the prototype virtual reality service model.
The Mini Parasep SF fecal parasite concentrator (MPSFC) is a new modification of the closed concentration system, which can easily be adopted in any routine clinical pathology laboratory. Here we describe our experience with the system in diagnosing Opisthorchis viverrini. A total of 199 fecal samples was submitted for routine examination in the clinical pathology laboratory of Suranaree University of Technology hospital, Nakhon Ratchasima province, Thailand, during August to October 2015. Out of all samples examined, 10 (5.03%) were positive with intestinal parasites including O. viverrini (2.01%), followed by Strongyloided stercoralis (1.51%), Hookworm (0.5%), Taenia spp. (0.5%), and Entamoeba coli (0.5%). Regarding the distribution of intestinal parasites in relation to the methods used, and found that 4 samples (2.01%) were positive using the direct wet smear method while 10 (5.03%) were positive with the Mini Parasep SF method; the difference was statistically significant ($X^2$-test = 116.506, p-value =0.001). Mean time for processing using the Parasep system was 6.03 min/sample, the conventional direct wet smear method at 0.3 min/sample. Cost per test, conventional direct wet smear method costing less than the Parasep method at USD 0.74/sample versus USD 1.47/sample. This first report of O. viverrini detection using MPSFC indicates that Parasep concentration test is useful in the routine laboratory, increasing the yield of parasites as compared to direct microscopy, but with greater processing time and cost. Further comparisons between the Parasep concentration test and common methods for O. viverrini detection are required, particularly concerning use in epidemiological surveys.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.