• 제목/요약/키워드: Conventional Array

검색결과 896건 처리시간 0.029초

저주파 대역에서 좌/우 구분이 가능한 지향성배열센서 구조 및 신호처리 기법 (A structure and signal processing of directional linear array for left/right discrimination in low frequency band)

  • 김대경;배은현;전상태;김태환
    • 한국음향학회지
    • /
    • 제37권4호
    • /
    • pp.188-195
    • /
    • 2018
  • 본 논문은 기존 선배열센서에서 발생하는 좌/우 구분 모호성을 해결하기 위해 저주파 대역에서 좌/우 구분이 가능한 지향성배열센서 구조 및 신호처리 방안을 제안한다. 지향성배열센서는 기존 음향배열센서에 지향성을 가지는 DIFAR(Directional Frequency Analysis and Recording)배열센서를 추가 확장한 선배열센서 구조이며, 음향배열센서의 빔형성 결과와 DIFAR배열센서의 빔형성 결과를 융합/처리하는 신호처리 구조를 가진다. 이러한 지향성배열센서는 좌/우 구분이 가능한 기존의 이중 선배열센서와 비교하여 낮은 신호 대 잡음비 및 저주파수 대역에서 높은 좌/우 구분 성능을 나타낸다.

S-밴드용 원형 마이크로스트립 패치 2×2 배열 안테나의 설계 (Design of Circular Microstrip Patch 2×2 Array Antenna for S-band Applications)

  • 안용복;최병하
    • 한국항행학회논문지
    • /
    • 제11권1호
    • /
    • pp.64-71
    • /
    • 2007
  • 본 논문에서는 ISM(Industrial, Scientific, Medical)대역과 Wireless LAN대역을 위한 S-band에서 동작하는 마이크로스트립 안테나를 설계 및 제작을 하였다. 기존의 사각패치 안테나 소자가 아닌 원형패치 안테나 소자 4개를 평면상에 $2{\times}2$로 배열하였다. 단일 원형패치의 크기를 계산하여 최적화하였으며 방사소자 간의 간격을 $0.24{\lambda}$로 배열하였다. 원형패치 안테나 소자를 사용함으로써 기존의 사각패치 안테나 소자를 이용한 것 보다 8%의 크기를 감소시켰다. 제안된 안테나는 E-평면에서는 안테나 이득 12.7 [dBi], 3 dB 빔폭은 $40^{\circ}$를 나타냈으며 H-평면에서는 안테나 이득 12.1 [dBi], 3 dB 빔폭은 $45^{\circ}$라는 특성을 나타내었으며, 250[MHz]의 대역폭 (VSWR < 2)을 얻었다.

  • PDF

Performance Analysis of MRT-Based Dual-Polarized Massive MIMO System with Space-Polarization Division Multiple Access

  • Hong, Jun-Ki
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제12권8호
    • /
    • pp.4006-4020
    • /
    • 2018
  • In recent years, one of the most remarkable 5G technologies is massive multiple-input and multiple-output (MIMO) system which increases spectral efficiency by deploying a large number of transmit-antennas (eg. tens or hundreds transmit-antennas) at base station (BS). However, conventional massive MIMO system using single-polarized (SP) transmit-antennas increases the size of the transmit-array proportionally as the number of transmit-antennas increases. Hence, size reduction of large-scale transmit-array is one of the major concerns of massive MIMO system. To reduce the size of the transmit-array at BS, dual-polarized (DP) transmit-antenna can be the solution to halve the size of the transmit-array since one collocated DP transmit-antenna deploys vertical and horizontal transmit-antennas compared to SP transmit-antennas. Moreover, proposed DP massive MIMO system increases the spectral efficiency by not only in the space domain but also in the polarization domain whereas the conventional SP massive MIMO system increases the spectral efficiency by space domain only. In this paper, the comparative performance of DP and SP massive MIMO systems is analyzed by space division multiple access (SDMA) and space-polarization division multiple access (SPDMA) respectively. To analyze the performance of DP and SP massive MIMO systems, DP and SP spatial channel models (SCMs) are proposed which consider depolarized propagation channels between transmitter and receiver. The simulation results show that the performance of proposed 32 transmitter (Tx) DP massive MIMO system improves the spectral efficiency by about 91% for a large number of user equipments (UEs) compare to 32Tx SP massive MIMO system for identical size of the transmit-array.

A Study of 0.5-bit Resolution for True-Time Delay of Phased-Array Antenna System

  • Cha, Junwoo;Park, Youngcheol
    • International journal of advanced smart convergence
    • /
    • 제11권4호
    • /
    • pp.96-103
    • /
    • 2022
  • This paper presents the analysis of increasing the resolution of True-Time-Delay (TTD) by 0.5-bit for phased-array antenna system which is one of the Multiple-Input and Multiple Output (MIMO) technologies. For the analysis, a 5.5-bit True-Time Delay (TTD) integrated circuit is designed and analyzed in terms of beam steering performance. In order to increase the number of effective bits, the designed 5.5-bit TTD uses Single Pole Triple Throw (SP3T) and Double Pole Triple Throw (DP3T) switches, and this method can minimize the circuit area by inserting the minimum time delay of 0.5-bit. Furthermore, the circuit mostly maintains the performance of the circuit with the fully added bits. The idea of adding 0.5-bit is verified by analyzing the relation between the number of bits and array elements. The 5.5-bit TTD is designed using 0.18 ㎛ RF CMOS process and the estimated size of the designed circuit excluding the pad is 0.57×1.53 mm2. In contrast to the conventional phase shifter which has distortion of scanning angle known as beam squint phenomenon, the proposed TTD circuit has constant time delays for all states across a wide frequency range of 4 - 20 GHz with minimized power consumption. The minimum time delay is designed to have 1.1 ps and 2.2 ps for the 0.5-bit option and the normal 1-bit option, respectively. A simulation for beam patterns where the 10 phased-array antenna is assumed at 10 GHz confirms that the 0.5-bit concept suppresses the pointing error and the relative power error by up to 1.5 degrees and 80 mW, respectively, compared to the conventional 5-bit TTD circuit.

Comparison of two types of Permanent Magnet Linear Synchronous Motor with the Minimum Detent Force

  • Jang, Seok-Myeong;Lee, Sung-Ho;Yoon, In-Ki
    • KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
    • /
    • 제11B권4호
    • /
    • pp.146-150
    • /
    • 2001
  • Comparison on the performances between the Halbach array type permanent magnet linear synchronous motor (HA-PMLSM) and the convensional array type permanent magnet linear synchronous motor (CA-PMLSM) was made with finite element analysis (FEA) and experiment. The HA-PMLSM is seen to be superior to the CA-PMLSM. Optimum ratio of magnet length to slot pitch of the HA-PMLSM which reduces the detent force was determined. Also, Comparison of forces of the HA-PMLSM and the CA-PMLSM with minimum detent force is presented.

  • PDF

Control of a Novel PV Tracking System Considering the Shadow Influence

  • Ko, Jae-Sub;Chung, Dong-Hwa
    • Journal of Electrical Engineering and Technology
    • /
    • 제7권4호
    • /
    • pp.524-529
    • /
    • 2012
  • This paper proposes a novel control strategy of a PV tracking system considering the shadow influence. If distance of between PV arrays is not enough, shadow can be occurred to PV module. In PV system, if shadow is occurred to PV modules then PV modules operates reverses bias, and will eventually cause hot-spot and loss. To reduce loss by shadow influence, this paper proposes shadow compensation algorithm using distance between arrays and shadow length of array. The distance between arrays is calculated by using azimuth of solar, and length of array shadow is calculated using by altitude of solar. The shadow compensation algorithm proposed in this paper compares distance between arrays and length of array shadow. When the shadow length is longer than the distance between arrays, the algorithm adjusts altitude of array to avoid the shadow effects. The control algorithm proposed in this paper proves validity through compared with conventional algorithm and proposes experiment result.

General Linearly Constrained Narrowband Adaptive Arrays in the Eigenvector Space

  • Chang, Byong Kun
    • Journal of information and communication convergence engineering
    • /
    • 제15권3호
    • /
    • pp.137-142
    • /
    • 2017
  • A general linearly constrained narrowband adaptive array is examined in the eigenvector space. The optimum weight vector in the eigenvector space is shown to have the same performance as in the standard coordinate system, except that the input signal correlation matrix and look direction steering vector are replaced with the eigenvalue matrix and transformed steering vector. It is observed that the variation in gain factor results in the variation in the distance between the constraint plane and the origin in the translated weight vector space such that the increase in gain factor decreased the distance from the constraint plane to the origin, thus affecting the nulling performance. Simulation results showed that the general linearly constrained adaptive array performed better at an optimal gain factor compared with the conventional linearly constrained adaptive array in a coherent signal environment and the former showed similar performance as the latter in a noncoherent signal environment.

공명기 배열을 이용한 중속 디젤엔진 배기 소음기의 저주파수 대역 성능 개선 연구 (A Study on the Performance Improvement of Medium Speed Diesel Engine Exhaust Silencer in the Low-frequency Range Using Array Resonators)

  • 김영현;주원호;배종국
    • 한국소음진동공학회논문집
    • /
    • 제19권7호
    • /
    • pp.693-698
    • /
    • 2009
  • Various acoustic tests were carried out to investigate the acoustic performance of diesel engine exhaust silencers. In order to consider flow effects, the test facility was set up composed of fan, duct and silencer. Using the test facility, insertion loss tests were carried out to improve the acoustic performance in the low-frequency ranges. Through a series of tests, it was found out that the array resonators having multi-perforated holes inside the exhaust silencer, might be very effective in the low frequency range. Consequently, the hybrid-type silencer which is the combination of reflective silencer with array resonators and conventional absorptive silencer, was proposed and its high performance in the low-frequency range was also verified.

공명기 배열을 이용한 디젤엔진 소음기의 저주파수 대역 성능 개선 연구 (A Study on the Improvement of Acoustic Performance of Diesel Engine Exhaust Silencer in the Low-Frequency Range using Array Resonators)

  • 이태경;김영현;주원호;배종국
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2007년도 춘계학술대회논문집
    • /
    • pp.30-35
    • /
    • 2007
  • Various acoustic tests were carried out to investigate the acoustic performance of diesel engine exhaust silencers. In order to consider flow effects, test equipment composed of fan, duct and silencer was set up. Using the test equipment, insertion loss tests were carried out to improve the performance in the low-frequency ranges. Through a series of tests, the fact that array resonators may be effective in the low-frequency noise has been verified. Consequently, the hybrid-type silencer which is the combination of reflective silencer with array resonators and conventional absorptive silencer were proposed and its high acoustic performance in the low-frequency range has also been verified.

  • PDF

혼안테나를 결합한 고 이득 도파관 배열 안테나 설계 (The Design of High Gain Waveguide Array Antenna Combining Horn Antenna)

  • 이한영
    • 전기학회논문지
    • /
    • 제63권2호
    • /
    • pp.257-260
    • /
    • 2014
  • In this paper, a high gain waveguide array antenna combining horn antenna on slot radiator was designed. And the fabricated antenna showed enough gain, improved efficiency and broadband characteristics for receiving satellite signals, compare to conventional microstrip antenna which has dielectric loss and radiation loss on transmission line. For easy fabrication, the waveguide structure was composed by 3-stages of radiator, signal coupler and transmission line. By experiment, the array waveguide antenna of 4 by 16 showed 28.3[dBi] gain and 2:1 of VSWR. And by combining horn antenna structure, the gain was increased 1[dB]. The received signal from Koreasat 6 by measurement showed 16[dBc] of C/N on BS(Broadcasting Satellite)-band and 14[dBc] of C/N on CS(Communication Satellite)-band.