• The Transactions of the Korean Institute of Power Electronics
• /
• v.11 no.3
• /
• pp.201-208
• /
• 2006

An alternative to the nuclear and fossil fuel power is renewable energy technologies (hydro, wind, solar and ocean), and the research about the highest efficiency machinery have been processed. The high-power LED is the representative one among those. In this paper, a high efficiency lighting system using a battery charged with solar or wind power is proposed for a high power LED. And a new efficient converter called 'Back-boost' is proposed. The validity of the lighting system scheme is verified by experimental results based on a laboratory prototype.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2017.06a
• /
• pp.197-200
• /
• 2017

퍼지 논리를 기반으로 한 적응형 스트리밍 기법인 FDASH 적응 알고리즘은 빠르게 변하는 네트워크 상황에서 우수한 콘텐츠의 화질을 보장하면서 끊김 없는 서비스를 제공하는 특성을 보이지만 비디오의 화질이 자주 변하기 때문에 최고의 사용자 체감 품질 (QoE: Quality of Experience)을 제공하지 못 할 수도 있다. 본 논문에서는 제한된 버퍼 크기를 가지고 동일한 콘텐츠의 화질을 보장하면서도 비디오 화질의 변화 횟수를 줄여서 최적의 QoE를 제공할 수 있도록 하는 변환된 퍼지 논리 기반의 DASH 적응 알고리즘을 제안하고자 한다. 제안된 방식은 우선 퍼지 논리 제어부(FLC : Fuzzy Logic Controller)의 수정을 통하여 다음 세그먼트의 비트율에 대해 최적의 판단을 하도록 하였고, 세그먼트 비트율 필터링 모듈 (SBFM: Segment Bitrate Filtering Module)을 추가하여 비디오 화질의 변화 횟수가 최소화 될 수 있도록 하였으며, 스트리밍 서비스 시작 시 SBFM에 의해 일정시간 저화질의 비디오를 시청해야 하는 상황을 막기 위한 Start Mechanism을 추가하였고, 마지막으로 버퍼의 오버플로우를 방지하기 위해 Sleeping Mechanism을 추가하였다. NS-3를 이용한 네트워크 모의실험 결과를 통해 제안된 방식이 FDASH 방식에 비하여 제한된 버퍼크기 상황 하에서도 오버플로우가 발생하지 않으며 점대점(Point to Point) 상황에서는 거의 동일 화질 성능을 보이면서도 비디오 화질 변화 횟수를 50% 이상 줄일 수 있음과 일반 Wifi환경에서는 오히려 17.8%정도 더 뛰어난 비디오 화질 성능을 보이면서 비디오 화질변화 횟수 측면에서는 53.1%정도 줄일 수 있음을 보여준다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.06a
• /
• pp.349-352
• /
• 2005

The energy management of an HEV using optimal control and global optimization is thought to be closest to the best operation of the system. However, there are some controversies on the ways of defining the optimization problems and constituting the optimal control simulators. Here, we presented a simulator which adopts the concept of equivalent fuel economy and leads the vehicle to run in a more efficient way. In order to realize the optimal operation of the HEV and check the validity of the control logics, we also developed a forward-facing simulator. The simulator was developed with the Cruise and MATLAB co-simulation interface. Especially, neural network controller was used for the hybrid control module in the simulator. With the simulator, the optimal operation could be converted into hybrid control rules and the validity of the operation was verified.

• Proceedings of the KIEE Conference
• /
• 2003.11b
• /
• pp.35-42
• /
• 2003

We have studied DC energy conversion of RF card by wireless communication. In order to attain an objective, it used the system which is a Rectenna. The main purpose of energy conversion system is the operation of the circuits at RF-ID system. The proposed RF-ID system is a lot classified with the reader and tag. Reader is a kind of the base station role supporting RF energy. And priority tag convert RF energy from the reader it was delivered with a wireless to DC energy. The energy which is converted like Tag. It transmits to the reader characteristic ID of each card. The tag is mainly divided into rectifier, power module, memory and controller. The FRAM maintains the data like a ROM in no-power situation. And the advantage is a low power element compared with other EEPROM. There are two considerations, when RF energy is converted into DC source by wireless. One is energy amount supported from the reader, the other is high power efficiency. This paper presents a study of simulation and experiments on the RF-DC conversion circuit in tag by the power efficiency concentrated.

• The KIPS Transactions:PartA
• /
• v.14A no.7
• /
• pp.391-398
• /
• 2007

In this paper, we design a future mobile camera standard interface based on the MIPI CSI-2 and D-PHY specification. The proposed CSI-2 have the efficient multi-lane management layer, which the independent buffer on the each lane are merged into single buffer. This scheme can flexibly manage data on multi lanes though the number of supported lanes are mismatched in a camera processor transmitter and a host processor. The proposed CSI-2 & D-PHY are verified under test bench. We make an experiment on CSI-2 & D-PHY with FPGA type test-bed and implement them onto a mobile handset. The proposed CSI-2 & D-PHY module are used as both the bridge type and the future camera processor IP for SoC.

• Journal of Electrical Engineering and Technology
• /
• v.11 no.1
• /
• pp.117-124
• /
• 2016

Solar photovoltaic pumping system is one of most important of renewable energy applications especially in rural areas. Besides, the control strategy for standalone solar pumping system based on induction motor and without DC/DC converter has been widely studied and discussed in the literature. This topology is of great concern due its economic issues, especially when a standard frequency converter (SFCs) with scalar control is used instead of a dedicated PV inverter. This paper proposes an external control module to generate SFCs frequency reference in order to ensure both maximum power point tracking (MPPT). We present method of modeling and control of photovoltaic pumping system based centrifugal pump controlled by new improved incremental conductance in order to optimize the price and operation of pumping system this MPPT algorithm have many advantages like can be eliminate proportional integral controller It is a low cost solution since it requires no additional power equipment. The induction motor driven pump that is powered by a solar array is controlled by the indirect field oriented control (IFOC). The effectiveness of the proposed approach is illustrated by simulations carried out under Matlab Software. The experimental results are compared with simulation results.

• Journal of Korea Society of Industrial Information Systems
• /
• v.19 no.3
• /
• pp.25-30
• /
• 2014

This paper describes the design of gate driver circuits in distributed maximum power point tracking(DMPPT) controller for photovoltaic system. For the effective DMPPT control in the existence of shadowed modules, high voltage gate driver is applied to drive the DC-DC converter in each module. Some analog blocks such as 12-b ADC, PLL, and gate driver are integrated in the SoC for DMPPT. To reduce the power consumption and to avoid the high voltage damage, a short pulse generator is added in the high side level shifter. The circuit was implemented with BCDMOS 0.35um technology and can support the maximum current of 2A and the maximum voltage of 50V.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.10 no.4
• /
• pp.175-180
• /
• 2002

In order to satisfy the requirements of time reduction and cost saving for development of electronic control systems(ECU) in automotive industry, the applications of a standardized real-time operating system(RTOS) and a communication protocol to ECUs are increased. In this study, a body control module(BCM) that employs OSEK/VDX(open system and corresponding interfaces for automotive electronics/vehicle distributed executive) OS tour the RTOS and a controller area network(CAN) fur the communication protocol is designed, and the performances of the system are evaluated. The BCM controls doors, mirrors, and windows of the vehicle through the in-vehicle network. To identify all the transmitted and received control messages, a PC connected with the CAN communication protocol behaves as a CAN bus emulator. The control system based upon in-vehicle network improves the system stability and reduces the number of wiring harness. Furthermore it is easy to maintain and simple to add new features because the system is designed based on the standards of RTOS and communication protocol.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.14 no.3
• /
• pp.15-21
• /
• 2000

This paper presents the modeling method of $3\Phi$ phase-controlled rectifier for the DC motor drive in MATLAB/SIMULINK environment. This method has no need to extend the system mathematically and thus it's easy to integrate the various systems. The whole model consists of $3\Phi$ phase-controlled rectifier block, DC motor block and speed/current controller block. The simulation results show that the model outputs are almost similar to those of the real system and therefore that the presented method is suitable for the research of the closed-loop controlled power electronic systems.

• Journal of the Korean Society of Industry Convergence
• /
• v.21 no.4
• /
• pp.183-189
• /
• 2018

The focus of this paper is to design and control a three fingered hand system with eight axes for smart factory with an flexible controller, and to keep a useful big database for dynamic manipulation based on the experimental results. The weight of the hand module is only 1.2 kg, but flexible motion and powerful grasping are possible. To achieve such a flexible motion control of a robotic hand, we have developed a robust and precise fingered hand with a control system incorporating image recognition system in which we deal with the problems of not only accuracy and range of motion but also the flexibility of hand. The fingers are arranged so as to grasp both circular and prismatic objects. In order to achieve the light mechanism, we reduced the number of joints and fingers as much as possible. In this study, it was used three fingers with eight axes which is the optimal number to achieve a robust grasping diverse shape parts for smart factory.