• 조명전기설비학회논문지
• /
• 제18권6호
• /
• pp.121-127
• /
• 2004

필드버스인 CAN은 시스템 적용에 있어서 매우 간단하고 저렴하게 구성할 수 있어 자동차제어용 네트워크 적용을 위하여 개발되었다. 그러나 특성이 매우 우수하고 저렴한 제어모듈 개발이 가능하여 제조 및 프로세스제어 환경으로 적용범위가 확대되는 등 산업현장에 광범위하게 적용되고 있다. 따라서 본 연구에서는 CAN필드버스를 빌딩 자동제어 시스템에 적용을 위하여 CAN지능형 제어모듈을 개발하고 이 모듈을 통하여 자동문 제어 및 모니터링할 수 있는 실험시스템을 제작하고 그 유효성을 평가하였다 또한 Key 패드 및 RF로 자동문을 개폐할 수 있도록 슬레이브 모듈에 접속하여 제어할 수 있는 기법도 제시하였다.

• Journal of Power Electronics
• /
• 제17권3호
• /
• pp.632-640
• /
• 2017

Input series output independent (ISOI) dc-dc converter systems are suitable for high voltage input and multiple output applications with low voltage rating switches. This paper proposes a novel control strategy consisting of one output voltage regulating (OVR) control loop and n-1 (n is the number of modules in the ISOI system) input voltage sharing (IVS) control loops. An ISOI system with the proposed control strategy can be applied to applications where the output loads of each module are the same. Under these conditions, IVS can be achieved and output voltages copying can be realized in an ISOI system. In this control strategy there is only one controller for each module and the design process of the control loops is simple. Since no central controller is needed in the system, modularity of the system is improved. The operation principle of the new control strategy is introduced and the control effect is simulated. Then the output power and voltage characteristics of an ISOI system under this new control strategy are analyzed. The stability of the proposed control strategy is explored base on a Hurwitz criterion, and the design guide line of the control strategy is given. A two module ISOI system prototype is fabricated and tested in the laboratory. Experimental results verify the effectiveness of the proposed control strategy.

• 한국감성과학회:학술대회논문집
• /
• 한국감성과학회 2001년도 춘계학술대회 논문집
• /
• pp.42-47
• /
• 2001

가상현실 기술은 이제 컴퓨터가 생성한 환경과 사용자간의 자유로운 상호작용을 수행할 수 있도록 하는 것이 중요하게 되었다. 이러한 상호작용을 위해서는 시각 제시기뿐만 아니라 사용자가 가상환경에서 물리적인 힘을 느낄 수 있도록 하는 것이 중요하다. 본 논문은 가상환경에서 사용자에게 운동감을 제시할 수 있는 기기들의 소프트웨어적인 아키텍처를 제안하고, 또한 이러한 기기들을 연결하는 데 있어서 가상환경과 통합될 수 있도록 가상환경 서보와 힘 피드백 제시기간의 통신규약을 제시한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.1798-1799
• /
• 2011

In this paper, A new cost-effective and accurate input noise rejection method for High Speed Counter module of PLC (Programmable Logic Controller) is proposed. By using combination of simple additional logic circuit and the Timer Pulse function of general purpose MPU, Cost-effectiveness and improvement of accuracy of filtering function can be achieved. This proposed method is verified by simulation. This proposed method is much useful for simple industrial controller based on simple microprocessor because of simplicity, accuracy and low cost.

• 산업공학
• /
• 제12권4호
• /
• pp.575-585
• /
• 1999

This study develops and operating software for a model plant. The model plant consists of an AS/RS system, two machining centers, an assembly line, and supplementary material handling equipments. Devices of each component are connected with the IBS RT24 DIO 16/16-T I/O module. Each I/O module communicates digital signals with the INTERBUS controller board via SUB-D 9 Connector cable. This study is a previous stage for developing an educational CIM software. Petri Nets is used for modelling the storage/retrieval of the AS/RS system, the flow of workpieces and the assembly line for parts. The operating software is coded with Microsoft Visual $C^{++}$ 5.0 and Interbus Library which is a software driver for the controller board. The operating software can be run on a MS Windows 95. Microsoft Access is used for the implementation of databases for BOM, AS/RS, and parts.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년 학술대회 논문집 정보 및 제어부문
• /
• pp.594-596
• /
• 2006

In this thesis, we propose a algorithm that is able to detect a user's motion. A minute noise of accelerometer arises cumulative error in case of converting velocity and distance, which makes it difficult to detect movement of sensor. We use a lowpass filter, ALS algorithm, and motion detection block to minimize such cumulative error. we experiment using a motion-detective module which is composed of accelerometer, micro-controller, and serial interface. Our scheme is capable of detecting such as up, down, left, right, forward, and backward movement of the module. It is expected that our scheme is applied to a game controller or user interface of a next generation PC.

• 제어로봇시스템학회논문지
• /
• 제16권4호
• /
• pp.374-380
• /
• 2010

This paper proposes a wearable interface for a tendon-driven robotic hand prosthesis. The proposed interface is composed of a dataglove to measure finger and wrist joint angle, and a micro-control board with a wireless RF module. The interface is used for posture control of the robotic hand prosthesis. The measured joint angles by the dataglove are transferred to the main controller via the wireless module. The controller works for directly controlling the joint angle of the hand or for recognizing hand postures using a pattern recognition method such as LDA and k-NN. The recognized hand postures in this study are the paper, the rock, the scissors, the precision grasp, and the tip grasp. In experiments, we show the performances of the wearable interface including the pattern recognition method.

• Journal of Power Electronics
• /
• 제11권4호
• /
• pp.561-567
• /
• 2011

This paper presents a high-efficiency power conditioning system (PCS) for grid-connected photovoltaic (PV) modules. The proposed PCS consists of a step-up DC-DC converter and a single-phase DC-AC inverter for the grid-connected PV modules. A soft-switching step-up DC-DC converter is proposed to generate a high DC-link voltage from the low PV module voltage with a high-efficiency. A DC-link voltage controller is presented for constant DC-link voltage regulation. A half-bridge inverter is used for the single-phase DC-AC inverter for grid connection. A grid current controller is suggested to supply PV electrical power to the power grid with a unity power factor. Experimental results are obtained from a 180 W grid-connected PV module system using the proposed PCS. The proposed PCS achieves a high power efficiency of 93.0 % with an unity power factor for a 60 Hz / 120 Vrms AC power grid.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 B
• /
• pp.931-933
• /
• 1995

In this paper, we develop protype of wierless recognition system using low frequency. Application of this system is very broad. Namely, High-way toll gate, animal management, parking system and industral automation et al. This system is composed of controller, decoder and tag. Controller is personal PC, decoder is signal module and tag is mobile corresponder module. Modulation is ASK, 4,800bps, frequency is 120/60kHz and transmission length is about 80cm. And now we study improvement of stability, low power consumption, compact of tag and transmission length improvement.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2009년도 춘계학술대회
• /
• pp.257-259
• /
• 2009

본 논문에서는 분산된 Sensor Module에서 실시간 계측된 데이터를 네트워크 시스템으로 구성하였다. 각각의 Sensor Module 사이의 실시간 통신이 필수적이며 정해진 시간 내에 모니터링을 위한 기기들의 데이터와 제어 명령이 전달되어야 안정성을 가질 수 있다. 본 연구에서는 산업 현장의 분산 제어에 사용되는 네트워크 중에 CAN(Controller Area Network) 통신을 사용하였다. CAN은 초기에 자동차 산업 분야에 적용하기 위해 고안된 시리얼 네트워크 통신 방식으로 근래에는 산업 전 분야에 폭 넓게 적용되고 있다. CAN controller는 SJA1000(PHILLIPS사(社)), CAN transceiver는 PCA82C250 (PHILLIPS사(社))으로 설계하였다.