• KSTLE International Journal
• /
• v.7 no.2
• /
• pp.35-44
• /
• 2006

Turbocharger bearings are under the circumstance of high temperature, moreover rotated at high speed. It is necessary to be designed overcoming the high temperature. So the type of oil inlet port, the inlet oil temperature and the sort of engine oil should be designed, controlled and selected carefully in order to reduce the bearing inside temperature. In this study, the influence of aerated oil on a high-speed journal bearing is also examined by using the classical thermohydrodynamic lubrication theory coupled with analytical models for viscosity and density of air-oil mixture in fluid-film bearing. Convection to the walls and mixing with supply oil and re-circulating oil are considered. The considered parameters for the study of bubbly lubrication are oil inlet port's type, oil aeration level and shaft speed. It is found that the type of oil inlet ports and shaft speed play important roles in determining the temperature and pressure, then the friction and load of journal bearing at high speed operation. Also, the results show that, under extremely high shaft speed, the high shear effects on aerated oil and the high temperature effects are canceled out each other. So, the bearing load and friction show almost no difference between the aerated oil and pure oil.

• Tribology and Lubricants
• /
• v.23 no.5
• /
• pp.207-218
• /
• 2007

Turbocharger bearings are under the circumstance of high temperature, moreover rotated at high speed. It is necessary to be designed overcoming the high temperature. So the type of oil inlet port, the inlet oil temperature and the sort of engine oil should be designed, controlled and selected carefully in order to reduce the bearing inside temperature. In this study, the influence of aerated oil on a high-speed journal bearing is also examined by using the classical thermohydrodynamic lubrication theory coupled with analytical models for viscosity and density of air-oil mixture in fluid-film bearing. Convection to the walls and mixing with supply oil and re-circulating oil are considered. The considered parameters for the study of bubbly lubrication are oil inlet port's type, oil aeration level and shaft speed. It is found that the type of oil inlet ports and shaft speed play important roles in determining the temperature and pressure distribution, then the friction in a journal bearing at high speed operation. Also, the results show that, under extremely high shaft speed, the high shear effects on aerated oil and the high temperature effects are canceled out each other. So, the bearing load and friction show almost no difference between the aerated oil and pure oil.

• Proceedings of the Korean Society of Toxicology Conference
• /
• 2001.10b
• /
• pp.3-4
• /
• 2001

Residents of Qidong, Peoples Republic of China, are at high risk for development of hepatocellular carcinoma, in part due to consumption of foods contaminated with aflatoxins. Chlorophyllin, a mixture of semi-synthetic, water-soluble derivatives of chlorophyll that is used as a food colorant and over-the-counter medicine, has been shown to be an effective inhibitor of aflatoxin hepatocarcinogenesis in animal models.(omitted)

• Proceedings of the Korean Society of Toxicology Conference
• /
• 2001.10a
• /
• pp.46-47
• /
• 2001

Residents of Qidong, Peoples Republic of China, are at high risk for development of hepatocellular carcinoma, in part due to consumption of foods contaminated with aflatoxins. Chlorophyllin, a mixture of semi-synthetic, water-soluble derivatives of chlorophyll that is used as a food colorant and over-the-counter medicine, has been shown to be an effective inhibitor of aflatoxin hepatocarcinogenesis in animal models.(omitted)

• Proceedings of the Korea Water Resources Association Conference
• /
• 2004.05b
• /
• pp.563-567
• /
• 2004

During drought season, the self-purification capacities of the four major rivers in Korea are significantly controlled by environmental maintenance flows supplied from the mid- or upstream large dams. Therefore, it is obviously important to operate the dams considering not only water quantity aspects but also conservation of downstream water quality and aquatic ecosystems. Mathematical water quality models can be efficiently used to serve as a decision support tool for evaluating the effects of operational alternatives of upstream dams on the downstream aquatic environment. In this study, an unsteady one-dimensional water quality model, KORIV1-WIN was developed based on the theoretical and numerical algorithms for hydrodynamics and water quality simulations of CE-QUAL-RIV1. It consists of hydrodynamic(KORIV1H) and water quality(KORIV1Q) modules, and pre- and post-processors for input data preparations and output displays. The model can be used to predict one-dimensional hydraulic and water quality variations in rivers with highly unsteady flows such as dam outflow change, rainfall-runoff, and chemical spill events.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.37 no.1
• /
• pp.49-54
• /
• 1995

Three types of floating-type automatic inlet were developed for the purpose of reduc- ing farmer's working hours required for water management and saving irrigation water. The point of automation is to use a float within the inlet which is floated and sinked by the ponding depth of paddy field, Thus opens and closes the control gate of irrigation. Suitability of each inlet may depend on production cost, applicability to paddy field condi- tions, and feasibility to farmers, etc. The first model was composed of three parts : chamber for irrigation control gate, chamber for float controlled by ponding depth, and connection bar between the two parts. It was designed to open and close the control gate gradually as the ponding depth drops and rises to a certain level. The second model was designed to improve the weak point of the first model which is the imperfect-closing of gate when it approaches to the end of ir- rigation. A switch-spring was equipped above the connection bar for perfect opening and closing of gate when the ponding depth reaches to a certain level. The third model was designed by combining the two chambers, that is, cut in halves the inlet volume of the above two models. Magnets were equipped above the float for perfect opening and closing gate. The functional experiment for three developed inlets was successfully carried out and the rating curves were derived.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.23 no.4
• /
• pp.402-409
• /
• 2015

In this study a quasi-dimensional model is developed to predict the combustion process and emissions of a GDI engine under ultra-lean conditions. Combustion of a GDI engine condition is modeled as two simultaneous processes to consider significant fuel stratification. The first process is premixed flame propagation described as burning in a hemispherically propagating flame. The second is diffusion-controlled combustion modeled as mixing of multiple spray zones in the burned gas region. Mixing is an important factor in ultra-lean conditions leaving stratified mixture of developing sprays behind the propagating premixed flame. Sheet breakup and Hiroyasu models are applied to predict the velocity of a hollow cone spray. Validation is performed against measured pressures and NOx and CO emissions at different load and rpm conditions in the test engine.

• Nuclear Engineering and Technology
• /
• v.46 no.5
• /
• pp.605-618
• /
• 2014

The effects of variability of the mechanical properties of lead rubber bearings on the response of a seismic isolation system are investigated. Material variability in manufacturing, aging, and operation temperature is assumed, and two variation models of an isolation system are considered. To evaluate the effect of ground motion characteristics on the response, 27 earthquake record sets with different peak A/V ratios were selected, and three components of ground motions were used for a seismic response analysis. The response in an isolation system and a superstructure increases significantly for ground motions with low A/V ratios. The variation in the mechanical properties of isolators results in a significant influence on the shear strains of the isolators and the acceleration response of the superstructure. The variation provisions in the ASCE-4 are reasonable, but more strict variation limits should be given to isolation systems subjected to ground motions having low A/V ratios. For application of seismic isolation systems to safety-related nuclear structures, the variation in the material and mechanical properties of the isolation system should be properly controlled during the manufacturing and aging processes. In addition, special consideration should be given to minimize the accidental torsion caused by the dissimilarity in the stiffness variations of the isolators.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.8
• /
• pp.95-102
• /
• 2020

The purpose of this study is to test both the alignment theory and entertainment theory on family firms listed on the Pakistan Stock Exchange. To achieve these goals, we collected secondary data from 164 non-financial family firms in various sectors during 2014-18. These family firms are classified into two categories: family control firms and family owned firms. We take the audit fee and the audit quality as dependent variables while family control firms, family-owned firms, and family CEOs as independent variables. In addition, the study uses leverage, profit and export as control variables. To test the effect of the explanatory variables on the output variables, we use two econometric models, Ordinary Least Square and the Probit regression model. In addition, Huber Sandwich test is used to check the non-normality and heteroscedasticity of panel data. Contrary to the alignment effect, the study supports the entrenchment effect and advocates that family-controlled firms as well as family-owned firms are not conscientious regarding the selection of external auditors during their contracts with audit firms. They are less likely to pay high audit fees for good quality audit in Pakistan. Furthermore, the study shows a statistically significant and positive relationship between audit quality and audit fees.

• Journal of the Korea Society for Simulation
• /
• v.14 no.2
• /
• pp.35-43
• /
• 2005

Feedwater heaters of many nuclear power plants have recently experienced wall thinning damage, which will increase as operating time progresses. As it is judged that the wall thinning damages have generated due to local fluid behavior around the impingement baffle installed in downstream of the high pressure turbine extraction steam line to avoid colliding directly with the tubes, numerical analyses using PHOENICS code were performed for two models with original clogged impingement baffle and modified multi-hole impingement baffle. To identify the relation between wall thinning and fluid behavior, the local velocity components in x-, y-, and z-directions based on the numerical analysis for the model with the clogged impingement baffle were compared with the wall thickness data by ultrasonic test. From the comparison of the numerical analysis results and the wall thickness data, the local velocity component only in the y-direction, and not in the x- and z-direction, was analogous to the wall thinning configuration. From the result of the numerical analysis for the modified impingement baffle to mitigate the shell wall thinning, it was identified that the shell wall thinning may be controlled by the reduction of the local velocity in the y-direction.