• Journal of Pharmaceutical Investigation
• /
• 제40권1호
• /
• pp.63-66
• /
• 2010

The "Guidance Document for Bioequivalence Study" was revised for adding to bioequivalence studies of controlled-release products after meal(Korea Food & Drug Administration Notification #2008-22, 2008.5.7). The bioequivalence study design for controlled-release products is $2{\times}2$ crossover under fast and fed condition in respect. For studies of controlled-release products under fed study, the same high-fat diet should be taken within 20 minutes in at least a 10-hour fasting state. The drug products should be administered 30 minutes after the meal started. A high-fat(more than 35 percent of total caloric content of the meal) and high-calorie(over 900 calories) meal is recommended as a test meal for fed BE studies.

• 대한화학회지
• /
• 제37권5호
• /
• pp.527-536
• /
• 1993

Chitin을 강알칼리로 탈아세틸화시켜 합성한 chitosan을 증류수에 팽윤시킨 다음 글리세린을 가하여 교반하였다. 이 고분자 용액에 약물인 silver sulfadiazine을 가하여 경피흡수용 고분자 matrix을 제조하였다. 이렇게 제조된 고분자 matrix로부터 약물의 방출거동과 고분자 matrix 변수와의 상관관계 등을 조사함으로써 지속적이고 조절된 경피흡수제형으로서의 사용 가능성과 특성을 조사하였다. 고분자 matrix 내의 약물의 함유량과 matrix의 두께가 증가할수록 약물의 방출시간은 더 지연되었다. 그러나 글리세린의 함유량이 증가함에 따라 약물의 방출시간은 오히려 감소하였다. 약물의 함유량, 글리세린의 함유량 및 matrix의 두께가 증가할수록 겉보기 방출속도상수(K)값도 증가하였다.이상과 같이 chitosan은 의약의 방출조절형제제로서 가능성을 나타냈으며, 약물로 사용된 silver sulfadiazine의 방출거동은 Higuchi model에 따른 확산으로 생각되었다.

• Journal of Microbiology and Biotechnology
• /
• 제9권1호
• /
• pp.50-55
• /
• 1999

To develop a new form of controlled release dosage for administering for indomethacin (IND), two formulations of IND-loaded nanoparticles were designed based on polysaccharide (guar) derivatives. Nanoparticles prepared by the dialysis method were characterized with respect to morphology, size distribution, drug content, and in vitro drug release. Morphological studies by scanning electron microscopy (SEM) indicated that guar acetate (GA) nanoparticles were spherical in shape and had a smooth surface. The particle size distributions of formulation I (40mg of GA) and formulation II (80mg of GA) were shown to be $250.78\pm185.13nm$ and $718\pm145.90nm$ in distilled water ($20$^{\circ}C$), respectively. The drug loading efficiencies of nanoparticles were approximately 26% and 31% for formulations I and II, respectively. The differential scanning calorimetry (DSC) results indicated that the IND was perfectly distributed within GA nanoparticles. We also found, from the X-ray diffractometry analysis, that a decrease in the degree of crystallinity of the drug occurred in the nanoparticles. No changes between the original IND and the released IND from GA nanoparticles were detected by FT-IR. Using guar acetate, it is possible to design nanoparticles which allow the controlled release of IND over an extended period of time.

• 약학회지
• /
• 제41권1호
• /
• pp.30-37
• /
• 1997

In order to formulate a controlled release system for oral drug delivery, the microcapsules were prepared in w/o emulsion containing cefaclor as a water-soluble model drug by th e method of interfacial polycondensation. Gelatin wis selected as a suitable polymer for interfacial polycondensation. Gelatin solution containing drug was emulsified in an organic phase under mechanical stirring. After emulsification, terephthaloyl chloride was added as cross linking agent, followed by mechanical stirring, washing and drying. Physical characteristics of microcapsules were investigated by optical microscopy, scanning electron microscopy and particle size analysis. Mean particle sizes of gelatin microcapsules were, in the range, of about 20~50 ${\mu}$m. The microcapsules were in good apperance with spherical shapes before washing, but were destroyed partially after washing and drying, even though some microcapsules were still maintained in their shapes. Contents of cefaclor in the microcapsules were calculated by UV spectrophotometry after 3 days extraction with pH 4 carbonate buffer solution. The effects of cross linking time. pH. concentration of cross-linking agent, and temperature on drug release kinetics have been discussed extensively.

• 약학회지
• /
• 제31권1호
• /
• pp.25-32
• /
• 1987

The effect of loading dose, plasticiser and PVA molecular weight on naproxen release from hydrophilic polymer matrix was examined. Hydrophilic polymer matrix was prepared with PVA and PVP by adding glycerine as plasticiser. The release of naproxen from polymer matrix was determined in phosphate buffer medium. The release rate of naproxen from the polymer matrix increased as drug loading dose and plasticiser percentage increased. Raproxen released from the polymer matrix showed the time square root kinetics. Without changing the release-pattern, the release rate of naproxen could not be changed by varying molecular weight of PVA. Linearly released time range increased as drug loading dose increased, whereas decreased as plasticiser percentage increased up to 30%.

• Journal of Pharmaceutical Investigation
• /
• 제26권2호
• /
• pp.125-135
• /
• 1996

Solid lipid nanoparticles(SLN) are particulate systems for parenteral drug administration and suitable for controlled release. SLN were prepared by homogenization process. Dispersion at increased temperature (molten lipid) was performed to yield SLN loaded with lipophilic drugs. Tetracaine base, lidocaine base, prednisolone, methyltestosterone and ethinylestradiol were used as model drugs to access the loading capacity and to study the release behavior. To investigate production parameters(lipids, surfactant concentration, homogenizing rpm) in the formation of SLN, particle size was performed by laser diffraction analysis. The mean particle size of SLN with stearic acid or trilaurin was below 1 micron. By decreasing the particle size and increasing the surfactant concentration, the release rate was increased especially in the case of highly lipophilic drug loaded SLN. Methyltestosterone or ethinylestradiol loaded SLN showed a distinctly prolonged release over a few days.

• KSBB Journal
• /
• 제18권2호
• /
• pp.107-110
• /
• 2003

스텐트 재질인 stainless steel 표면에 모델 약물인 rose bengal을 포함한 생분해성 고분자 PLGA, PHB, MCL-PHA를 코팅하여 약물방출 특성을 조사하였다. PLGA의 농도가 낮을수록, rose bengal의 농도가 높을수록, dip-coating 시간이 길수록 약물방출이 증가하였으며, PHB > PLGA > MCL-PHA의 순서로 약물이 빨리 방출되었다. 이는 생분해성 고분자의 농도 및 종류, 약물의 농도, dip-coating 시간 등을 변화시켜 약물방출을 조절할 수 있음을 나타낸다.

• 약학회지
• /
• 제60권1호
• /
• pp.46-50
• /
• 2016

The purpose of this study was the development of sustained-release lyogel of chlorhexidine in the treatment of periodontal diseases. A sustained-release chlorhexidine lyogel (CHX-G) was formulated, based on Eudragit$^{(R)}$ (1~3%), polyvinyl pyrrolidone (PVP) (0~10%), triacetin (20~40%), hydroxy ethyl cellulose (HEC) (1%) and glycerin. In vitro studies were performed to determine the release rate of chlorhexidine from CHX-Gs using dialysis tube. Our results suggest that the release rate of chlorhexidine from lyogel could be controlled by changing the lyogel compositions.

• Journal of Pharmaceutical Investigation
• /
• 제23권4호
• /
• pp.207-211
• /
• 1993

Reservoir type devices were designed for long-term implantable drug delivery system. The reservoir type device was prepared with the polymethacrylic acid gel coated with polyurethane membrane. Release controlling agent (RCA) were employed to control drug release from devices via generation of micropores in the membranes. The polyurethane membrane functioned as a rate controlling barrier. The drug release pattern of hydrogel demonstrated zero order kinetics. The release rate of drugs could be regulated by varying hydrophobicity/hydrophilicity and content of the RCA, as well as the thickness of the polyurethane membrane. The release of drugs from this system was governed by pore mechanism via simple diffusion and osmotic pressure.

• 폴리머
• /
• 제29권3호
• /
• pp.260-265
• /
• 2005

약물의 서방화에 있어서 독성이 특히 강하거나 유효 치료영역이 좁은 약물일수록 초기 버스트는 매우 중요하다. 이러한 약물의 전달을 위한 단일층으로 이루어진 나노미립구의 이용은 표면에 존재하는 약물 때문에 초기 버스트가 커서 서방화에 적절치 못하다. 따라서 본 연구에서는 생분해성 고분자인 덱스트란과 락타이드-글리콜라이드 공중합체(PLCA)를 이용한 이중층 나노미립구를 제조하여 서방성 방출 거동을 보이는 약물 전달체 제조에 대한 연구를 수행 하였다. 덱스트란과 PLCA의 나노미립구는 W/O/W법을 이용하여 이중 에멀젼 과정을 통해 제조하였고 계면활성제로는 폴리(비닐 알코올)(PVA)을 사용하였다. 덱스트란의 생체외 방출 거동을 확인하기 위해 동결 건조된 시료를 직경 $3{\times}1mm$ 몰드를 이용하여 웨이퍼를 제조하여 증류수에서 7일간 방출 거동을 확인하였다. 이중층 나노미립구는 각각의 단일고분자로 이루어진 나노미립구에 비해 다른 방출거동을 보였다. 특히 유화제인 PVA농도가 $0.2\%$인 것이 0차 방출에 가까운 결과를 보였다. 본 실험을 통해 대조군인 물리적인 혼합 모델, 덱스트란 또는 PLGA로만 이루어진 웨이퍼 및 단일층 미립구에 비해 이중층 나노미립구의 내부물질인 덱스트란의 방출 거동이 서방형을 보임을 확인할 수 있었으며 PVA의 함량에 따라 방출 거동을 조절할 수 있었다.