• Journal of Bio-Environment Control
• /
• v.30 no.4
• /
• pp.401-409
• /
• 2021

This study aimed to estimate the photosynthetic capacity of tomato plants grown in a semi-closed greenhouse using temperature response models of plant photosynthesis by calculating the ribulose 1,5-bisphosphate carboxylase/oxygenase maximum carboxylation rate (V_cmax), maximum electron transport rate (J_max), thermal breakdown (high-temperature inhibition), and leaf respiration to predict the optimal conditions of the CO₂-controlled greenhouse, for maximizing the photosynthetic rate. Gas exchange measurements for the A-C_i curve response to CO₂ level with different light intensities {PAR (Photosynthetically Active Radiation) 200µmol·m^-2·s^-1 to 1500µmol·m^-2·s^-1} and leaf temperatures (20℃ to 35℃) were conducted with a portable infrared gas analyzer system. Arrhenius function, net CO₂ assimilation (A_n), thermal breakdown, and daylight leaf respiration (R_d) were also calculated using the modeling equation. Estimated J_max, A_n, Arrhenius function value, and thermal breakdown decreased in response to increased leaf temperature (> 30℃), and the optimum leaf temperature for the estimated J_max was 30℃. The CO₂ saturation point of the fifth leaf from the apical region was reached at 600ppm for 200 and 400µmol·m^-2·s^-1 of PAR, at 800ppm for 600 and 800µmol·m^-2·s^-1 of PAR, at 1000ppm for 1000µmol of PAR, and at 1500ppm for 1200 and 1500µmol·m^-2·s^-1 of PAR levels. The results suggest that the optimal conditions of CO₂ concentration can be determined, using the photosynthetic model equation, to improve the photosynthetic rates of fruit vegetables grown in greenhouses.

• Journal of Korean Society of Forest Science
• /
• v.84 no.4
• /
• pp.495-501
• /
• 1995

Betula pendula and B. platyphylla var. japonica seedlings and/or grafts growing inside and outside of a plastic-greenhouse were treated with growth regulators to induce flowering at early stages of seedling and graft developments. The seedlings began to develop female catkins visibly in eight to nine months after seeding and in five months after the first treatment of growth regulators. Thirty three percents of the seedlings grown under controlled environment in the plastic-greenhouse with sufficient nutrient supply developed female catkins both in control plants and in the plants treated with IAA, $GA_3$ and kinetin, while none on the control plants grown in the field showed any sign of the development of floral organs. Sixty seven percents of the seedlings treated with ABA and SADH grown in the Plastic-greenhouse developed female catkins. All the seedlings treated with 6.24 mM of SADH developed female catkins. SADH treatment to 2-5 year old seedlings and grafts of birch had a tendency of positive effect on inducing and increasing the flowering of the two birch species.

• Journal of Bio-Environment Control
• /
• v.27 no.2
• /
• pp.173-179
• /
• 2018

Investigation of the optimum levels of pre-plant nitrogen for raising of hot pepper (cv. Nokkwang) plug seedlings was the objective of this research. To achieve this, the pre-plant nitrogen levels were varied to 0, 100, 250, 500, 750, 1,000, and $1,500mg{\cdot}L^{-1}$ and the other essential nutrients were controlled to equal concentrations in all treatments. All the fertilizers were added during the formulation of the mixed medium of coir dust, peatmoss, and perlite with the ratio of 35, 35, and 30% (v/v/v). The root medium containing pre-plant fertilizer was packed into 50-cell plug trays and seeds were sown. The measurement of pH and EC in every week, soil solution analysis for nutrients in week 0, 3, and 7 and growth measurements as well as tissue analysis for nutrient contents in week 7 were conducted. The pHs measured before seed sowing did not show significant differences, but the differences among treatments became significant as seedlings grow bigger. The soil solution ECs were significantly different among treatments in week 0 and these differences were diminished by degrees after week 3, resulting in no significant differences among treatments in week 7. The trends in changes of $NH_4-N$, $NO_3-N$, and other the macro-element concentrations in soil solution of root media were similar to those of ECs. The treatments of 500 and $750mg{\cdot}L^{-1}$ N were more effective than other treatments on seedling growth. The seedling growths in the treatments containing higher N than $1,000mg{\cdot}L^{-1}$ and control were severely suppressed. The elevated pre-plant N concentrations in the root medium resulted in the increase of tissue N contents. The treatments of 500 and $750mg{\cdot}L^{-1}$ N shown the highest seedling growths had 5.13% and 5.31%, respectively, in tissue N contents based on the dry weight of above ground tissue at week 7. The results of this study indicated that the optimum level of pre-plant N is 500 to $750mg{\cdot}L^{-1}$ for the raising of hot pepper plug seedlings.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.17 no.4
• /
• pp.306-316
• /
• 2015

An experiment in a controlled environment was conducted to evaluate the genotypic differences of grain yield and yield-related elements of rice under elevated air temperature. Eight rice genotypes included in three maturing group (early, medium, and medium-late maturing group) were grown with 1/5,000 a Wagner pots at four plastic houses that were controlled to the temperature regimes of ambient temperature (AT), $AT+1.5^{\circ}C$, $AT+3.0^{\circ}C$, and $AT+5.0^{\circ}C$ throughout the rice growing season in 2011. Ripened grain ratio and 1000 grain weight showed the most susceptible and tolerant responses to elevated air temperature, respectively. The grain yield reduction was attributable to the sharp decrease of ripened grain ratio. Grain yield was significantly decreased above the treatment of $AT+1.5^{\circ}C$ and $AT+3.0^{\circ}C$ in early maturing group and the others, respectively. Highly correlation to average temperature from heading to 20 days was revealed in yield (r = -0.69), ripened grain ratio (r = -82), fully-filled grain (r = -70), and 1000 grain weight (r = -0.31). The responses of yield and yield-related elements except number of spikelets and panicle to elevated air temperature were fitted to a logistic function. The parameters of logistic function for each elements except grain yield could not be applied to the other varieties. In conclusion, yield and yield-related elements responded differentially to elevated air temperature according to maturity groups and rice varieties. Ongoing global warming is expected to decrease the grain yield not only by decreasing the grain weight but also decreasing the ripened grain ratio in the future. However, the yield reduction would be mitigated by adopting and/or breeding the less sensitive varieties to high temperature.

• Journal of Korea Water Resources Association
• /
• v.45 no.11
• /
• pp.1157-1168
• /
• 2012

In this study, we assess changes in water quality trends over time based on certain control measurements in order to identify and analyze the cause of the trend in water quality. The current water pollution in the Nakdong River was analyzed, as it suggests that the significant changes in water quality have occurred in between 2006 and 2010. Based on monthly average data, we have examined for trends of the Nakdong River watershed in water temperature, Biological Oxygen Demand (BOD), Chemical Oxygen Demand (COD), Total Nitrogen (TN), and Total Phosphorus (TP). Moreover, we have investigated seasonal variation of water quality of sites within the Nakdong River Basin by implementing further analyses such as, Correlation Coefficient, Regression Analysis, Hierarchical Clustering Method, and Time Series Analysis on SPSS. Geology and topography of the watershed, controlled by various conditions such as, climate, vegetation, topography, soil, and rain medium, have been affected by the non-homogeneity. Our study suggests that such variables could possibly cause eutrophication problems in the river. One possible way to overcome this particular problem is to lay up a ship on the river by increasing the nasal flow measurement of the Nakdong River during rainy season. Moreover, the water management requires arranging the measurement of the flow in order to secure the river while the numerous construction projects need to be continuously observed. However, the water is not flowing tributary of the reason for the timing to be flowing in a natural state of river water and industrial water intake because agriculture. Therefore, ongoing research is needed in addition to configuration of all observations.

• Journal of Bio-Environment Control
• /
• v.26 no.3
• /
• pp.158-166
• /
• 2017

The object of this study was to improve tomato seedling quality in low temperature(below 7, $10^{\circ}C$ during night time or daily mean air temperature was $18^{\circ}C$) by application of silicate fertilizer. Six different silicate fertilizer concentrations (8, 16, 32, 64, 128, and 256mM) or water as the control were applied to tomato seedlings twice a week for 20 days. Positive effects were observed in the growth parameters of the seedlings treated with 16 and 32mM silicate fertilizer; the most effective concentration of silicate at which seedlings showed the best performance was 16mM. However, a high concentration of silicate (256mM) caused negative effects on the growth. The transpiration rate decreased alongside with the increase of silicate concentration up to 32mM, possibly due to the increased stomatal diffusive resistance. Silicate stimulated the growth and development of tomato seedlings, resulting in increased growth parameters and root morphology. However, no significant differences were observed among treatment numbers of soil-drenching wuth the silicate (6, 10, or 20 times with 16mM) for 20 days, suggesting that silicate treatment with 6 times may be sufficient to induce the silicate effects. The application of 16mM of silicate fertilizer reduced relative ion leakage and chilling injury during low temperature storage. In addition, the seedlings treated with silicate fertilizer recovered faster than those without silicate treatment after low temperature storage.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.43 no.5
• /
• pp.17-26
• /
• 2011

Drying behavior and physical properties of HwBKP, SwBKP, and OCC handsheets depending on kneading, refining and wet pressing were analyzed. The maximum drying shrinkage velocity was newly adopted to verify the effect of mechanical treatment of pulps by evaluating drying behavior according to varying the kneading, refining and wet pressing treatments. Those various treatments were changed to evaluate the relationship between the maximum drying shrinkage velocity and handsheets properties. When the drying shrinkage and the maximum drying velocity increased by refining and wet-pressing, handsheets strength was increased. The maximum drying shrinkage velocity showed higher correlation with physical properties of paper than WRV at different refining loads at SwBKP and mixed pulp. At high wet-web dryness, drying shrinkage, the maximum drying shrinkage velocity and strength properties of handsheet were increased. It meant that drying shrinkage behavior was highly affected by not only fibers' shrinkage but also fiber bonding. Kneading pre-treatment for KOCC and SwBKP effectively modified fiber properties and increasing paper strength and drying shrinkage. The effect of kneading pre-treatment was also confirmed by the maximum drying shrinkage velocity. Strength properties of mixed pulp handsheets were not increased by the kneading pre-treatment, although the maximum drying shrinkage velocity and WRV was increased. It meant that fibers network bonding of HwBKP was limited because of ves sels and ray cells' interference for bonding. Therefore in order to improve paper strengths containing HwBKP by mechanical treatments, interference of vessels and ray cells for fiber bondings should be carefully controlled.

• Proceedings of the Korean Society of Food Hygiene and Safety Conference
• /
• 1992.07a
• /
• pp.7-19
• /
• 1992

Fish pathology is one of the main scientific bases upon which this expansion in aquaculture has been dependent and requires a wide knowledge of the environmental constraints, the physiology and characteristics of the various pathogens, the responses of the host and the methods by which they may be controlled. The primary disease and parasite problems in aquaculture animals relate to viral, bacterial, fungal and protozoan epizootics. Parasitic nematodes, trematodes and cestodes are commonly found in aquaculture animals, but seldom are they present in concentrations sufficinet to cause significant problems. When an epizootic does occur and chemical treatment is indicated, the appropriate chemical must be selected and properly applied. We have antibiotics, sulfa, nitrofuran and other chemicals for treatment of fish diseases. Some may be mixed with the fred during formulation, added to the pellets of feed as a surface coating, given in the dorm of an injection or used as a bath. Even though a drug or chemical has been officially approved for use in aquaculture, the substance should never be used unless there is a clear need. Some of the reasions for this view are as follows: (1) the constant use of antibiotics can lead to the development of resistant strains of bacteria, (2) biofilter efficiency may be impaired or destroyed by chemicals added to closed recirculating water systems, and (3) the injudicious use of chemicals can have a damaging effect on the environment as well as on human.

• Journal of Biosystems Engineering
• /
• v.34 no.6
• /
• pp.391-396
• /
• 2009

The percentage of those aged 60 and over is 43.5% among our country's 3,186 thousands farming population, so farm village is getting aging society rapidly. Moreover agricultural competitiveness has being weakened due to labor shortage by degradation in quality of labor configuration from elderly porson. For realisms easy workability, we developed a motor vehicle for agricultural activity. The vehicle has an automatic guidance system which could follows a track of magnetic tape on the floor for easy moving to given working position. We collected data from two guidance sensors, located on front and rear end of the vehicle and calculated displacement and angle deviation from the track. This traveling system was stably controlled with processing information deflection S, angle of deviation, D and angle velocity, Vt = $k_1D$ - $k_2S$ from two guidance sensors attached on front and rear of th motor vehicle. Also this system have been tested under various condition of $k_1$, $k_2$ for comparison on both stepped and turning routes. The results show that traveling performance is best at $k_1$=0.7, $k_2$=3.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.43 no.4
• /
• pp.49-58
• /
• 2011

The maximum drying shrinkage velocity was proposed to verify bulk and stiffness improvement mechanism during drying according to papermaking parameters. It was based on the wet-web shrinkage behavior without the restraint of wet-web during drying, so intact drying impact could be measured. Bulking agent reduced the drying shrinkage and the maximum drying shrinkage velocity, so paper bulk increased and paper strength decreased. When adding cationic starch to stock with the bulking agent for strengthening, the bulk was increased further with additional decreasing of the drying shrinkage and the maximum drying shrinkage velocity. Paper strength also increased except tensile stiffness index with decreasing the drying shrinkage and the maximum drying shrinkage velocity. When using additional strength additives for strengthening of fiber interfaces extended by bulking agent and cationic starch, amphoteric strength additive increased paper stiffness without loss of paper bulk. It was considered that the added amphoteric strength additives were cross-linked to the stretched cationic starch and this cross-linking increased elasticity of fiber-polymer-fiber interfaces without changing the drying behavior. Paper bulk could be increased with decreasing the maximum drying shrinkage velocity. The drying shrinkage of paper also could be controlled by fiber-to-fiber bonding interfaces by the bulking agent. In this case, paper strength including stiffness was decreased by reducing fiber-to-fiber bonding but it could be improved by strengthening fiber-to-fiber interfaces with polymer complex without loss of bulk.