• Journal of Institute of Control, Robotics and Systems
• /
• v.22 no.2
• /
• pp.147-152
• /
• 2016

This paper proposes a new TPC (Transmission Priority Change) algorithm which is used to diagnose failures of a CAN (Controller Area Network) based network system for the oil tank monitoring. The TPC algorithm is aimed to increase the total amount of data transmission and to minimize the latency for an urgent message by changing transmission priority. The urgency of the data transmission has been determined by the conditions of sensors. There are multiple sensors inside of the oil tank, such as temperature, valve, pressure and level sensors. When the sensors operate normally, the sensory data can be collected through the CAN network by the monitoring system. However when there is a dangerous situation or failure situation happened at a sensor, the data need to be handled quickly by the monitoring system, which is implemented by using the TPC algorithm. The effectiveness of the TPC algorithm has been verified by the real experiments. In addition, this paper introduces a method that people can figure out the condition of oil tanks and also can perform the fault diagnosis in real-time by using transmitted packet data. By applying this TPC algorithm to various industries, the convenience and reliability of multiple sensors network system can be improved.

• The KIPS Transactions:PartC
• /
• v.14C no.6
• /
• pp.475-480
• /
• 2007

Recently, wireless networking devices that depend on the limited Battery and power-saving of wireless hosts became important issue. Batteries can provide a finite amount of energy, therefore, to increase battery lifetime, it is important to design techniques to reduce energy consumption by wireless hosts. This paper improved power saying mechanism in Distributed Coordination Function(DCF) of IEEE 802.11. In the IEEE 802.11 power saving mechanism specified for DCF, time is divided into so-called beacon intervals. At the start of each beacon interval, each node in the power saving mode periodically wakes up during duration called the ATIM Window. The nodes are required to be synchronized to ensure that all nodes wake up at the same time. During the ATIM window, the nodes exchange control packets to determine whether they need to stay awake for the rest of the beacon interval. The size of the ATIM window has considerably affected power-saving. This paper can provide more power-saving than IEEE 802.11 power saving mode because ATIM window size is efficiently increased or decreased.

• Journal of KIISE:Information Networking
• /
• v.35 no.6
• /
• pp.529-537
• /
• 2008

AODV routing protocol is intended for use by mobile' nodes in an ad-hoc network. In AODV nodes create routes on an on-demand basis. As the degree of node mobility becomes high, however, the number of the control packets, RREQ and RREP messages, have increased so rapidly. The unexpected increases in the number of the control packets cause the destination node to decrease the packet receiving rate and also to increase the overall energy consumption of such a network. In this paper, we propose a novel method of adaptively controlling the occurrences of such RREQ messages based on AIAD (additive increase additive decrease) under a consideration of the current network status. We have tested our proposed method with the conventional AODV and the method using timestamp based on the three performance metrics, i.e.. how long does node moves, node velocity, and node density, to compare their performance.

• Journal of KIISE:Information Networking
• /
• v.35 no.4
• /
• pp.337-344
• /
• 2008

Underwater acoustic sensor networks exhibit characteristics such as high propagation delay and low data rates, which are different from those of terrestrial wireless networks. Therefore, the conventional protocols used in wireless networks can be restrictive and inefficient when applied to underwater acoustic sensor networks. In this paper, we propose a medium access control protocol (MAC) to enhance the energy efficiency and throughput in underwater acoustic sensor networks. The proposed protocol employs a slot-based competition mechanism that reserves a time slot to send a data packet in advance. In the proposed protocol, collision between nodes can occur due to competition to obtain a slot. However, the proposed protocol minimizes the collisions between nodes because the nodes store the reservation information of the neighboring nodes, this reduces unnecessary energy consumption and increases throughput. We perform a simulation to evaluate the performance of the proposed protocol with regard to the energy consumption, the number of collision, channel utilization, throughput and transmission delay. We compare the proposed protocol with the conventional protocol, and the performance results show that the proposed protocol outperforms the conventional protocol.

• The KIPS Transactions:PartC
• /
• v.11C no.2
• /
• pp.235-244
• /
• 2004

TCP Vegas version provides better performance and more stable services than TCP Tahoe and Reno versions, which are widely used in the current Internet. However, in the situation where TCP Vegas and Reno share the bottleneck link, the performance of TCP Vegas is much smaller than that of TCP Reno. This unfairness is due to the difference of congestion control mechanisms of each TCP use. Several studies have been executed in order to solve this unfairness problem. In this paper, we analyze the minimum window size to maintain the maximum TCP performance of link bandwidth. In addition, we propose an algorithm which maintains the TCP performance and improves fairness by selective packet drops in order to allocate proper window size of each TCP connections. To evaluate the performance of the proposed algorithm, we have measured the number of data bytes transmitted between end-to-end systems by each TCP connections. The simulation results show that the proposed algorithm maintains the maximum TCP performance and improves the fairness.

• The KIPS Transactions:PartC
• /
• v.15C no.6
• /
• pp.539-546
• /
• 2008

In this paper, we propose an address autoconfiguration mechanism and a route establishment mechanism appropriate for the modified MANET architecture which overcomes the multi-link subnet problem. For the delivery of Router Advertisement (RA) messages without causing the duplicate packet reception problem in the multi-hop wireless network environment, the Scope-Extended RA (Scope-Extended Router Advertisement) message is defined. Also, by defining the MANET Prefix option, a MANET node is allowed to send packets destined to a host not in the MANET directly to the gateway. This can prevent the performance degradation caused by broadcasting control messages of the reactive routing protocol for route establishment. The performance of the proposed mechanism is analyzed through NS-2 based simulations and, according to the simulation results, it is shown that the proposed mechanism performs well in terms of the control message overhead.

• Journal of KIISE
• /
• v.44 no.6
• /
• pp.628-636
• /
• 2017

HTTP adaptive streaming is a technique that improves the quality of experience by storing various quality videos on the server and requesting files of the appropriate quality based on network bandwidth. However, it is difficult to measure the actual bandwidth in wireless networks with frequent bandwidth changes and high loss rate. Frequent quality changes and playback interruptions due to bandwidth measurement errors degrade the quality of experience. We propose a technique to estimate the available bandwidth by measuring the jitter, which is the derivation of delay, on a packet basis and assigning a weight according to jitter. The proposed scheme reduces the number of quality changes and mitigates the buffer underflow by reflecting less bandwidth change when high jitter occurs due to rapid bandwidth change. The experimental results show that the proposed scheme improves the quality of experience by mitigating buffer underflow and reducing the number of quality changes in wireless networks.

• Journal of the Korea Computer Industry Society
• /
• v.4 no.4
• /
• pp.547-552
• /
• 2003

In this thesis, interference phenomena of bluetooth networks requiring Security were minimized; strengthened security of piconet by assigning an identical PIN code to bluetooth devices, which was establishing a specific piconet during authentication stage. To establish a bluetooth piconet system. an unique ID was assigned to each bluetooth device, communication algorithms having different data formats between devices was designed, and an embedded hardware module using ARM processor and uCOS-II RTOS was implemented. About 30% of CPU efficiency in the module was increased by modifying functions including block parameters to work as nonblocking; by the increased efficiency of total piconet, the module could be used as an access point. The module could transmit maximum 10 frames of image and also audio signal by switching the packet effectively according to channel condition. By above-mentioned process, video, audio, and data could be well transmitted by the bluetooth managing program and the possibility of a commercial remote control system using bluetooth technology was suggested.

• Journal of Korea Multimedia Society
• /
• v.5 no.6
• /
• pp.697-703
• /
• 2002

In this paper, we propose the adaptive multi stream transmission technique based on SPIHT video signal for the highest quality service over the current Internet that does not guarantee QoS. In addition to the reliable transmission of the video stream over the asynchronous packet network, the proposed approach provides the transmission using the adaptive frame pattern control and multi steam over the TCP for continuous replay. The adaptive frame pattern control makes the transmission date scalable in accordance with the client's buffer status. Apart from this, the multi stream transmission improves the efficiency of video stream, and is robust to the network jitter problem, and maximally utilizes the bandwidth of the client's. As a result of the experiment, the DR(delay ratio) in the proposed adaptive multi-stream transmission is more close to zero than in the existing signal stream transmission, which enables the best-efforts service to be implemented.

• The Journal of the Korea Contents Association
• /
• v.16 no.11
• /
• pp.83-90
• /
• 2016

In this paper, we performed the analysis of transmission performance for Collision Free Period(CFP) supported by the low-power communication technology, IEEE 802.15.4 MAC (Media Access Control). For the analysis, periodic traffic, original service target of CFP, is considered and, according to the Quality of Service required, packet arrival pattern to MAC layer is categorized as batch and non-batch, and analysis on throughput, delay, and energy is performed for those patterns. On the basis of the obtained analysis, performance comparison with Collision Avoidance Period(CAP) is carried out for the health care applications that generate periodic traffic such as Pedometer, ECG, EMG. The evaluation confirms that CFP is more energy efficient for healthcare applications that generate periodic and time-critical traffic and moreover for the application with high bandwidth requirement CFP achieves up to 46% energy savings compared to CAP.