• Bulletin of the Korean Chemical Society
• /
• 제28권12호
• /
• pp.2396-2400
• /
• 2007

Transparent In-doped (1 at.%) zinc oxide (IZO) thin films are deposited by pulsed DC magnetron sputtering with H2 mixed Ar atmosphere on glass substrate without any heating process. Even at room temperature, highly c-axis oriented IZO thin films were grown in perpendicular to the substrate. The hydrogenated IZO (IZO:H) film isolated in H2 atmosphere for 30 min exhibited an average optical transmittance higher than 85% and low electrical resistivity of less than 2.7 × 10?3 Ω·cm. These values are comparable with those of commercially available ITO. Each of the IZO films was used as an anode contact to fabricate organic light-emitting diodes (OLEDs) and the device performances studied. At the current density of 1 × 103 A/m2, the OLEDs with IZO:H (H2) anode show excellent efficiency (11 V drive voltage) and a good brightness (8000 cd/m2) of the light emitted from the devices, which are as good as the control device built on a commercial ITO anode.

• 패션비즈니스
• /
• 제17권3호
• /
• pp.48-57
• /
• 2013

This study was performed to quantitatively and qualitatively estimate the effect of keratin essence on hair protection against physicochemical damage. Damaged hairs were obtained from an early thirty woman who dyed her hair two times and did digital permanent treatment of her hair two times. The damaged hairs were divided into four experimental groups, which are the control hair (CH) group without additional beauty treatment, the damaged hair (DH) group by additional dyeing treatment, basic essence-treated hair (BEH) group, and keratin essence-treated hair (KEH) groups according to the research goal. The protection effect of keratin essence against the physicochemical damage was quantitatively compared by difference of chrominance measured using a color difference meter and qualitatively compared by difference of outer morphological structure images pictured using scanning electron microscopy (SEM). The brightness and yellowish blue color of KEH were relatively lower but the reddish blue color was relatively higher than other groups of test hairs. Cuticle structure of the previously DH was irregularly deformed and more strongly deformed or partially broken by additional dyeing treatment. On the other hand, the gaps between cuticle scales of the DH were reformed by treatment with basic essence and reformed and filled by treatment with keratin essence in comparison with the DH group. Conclusively, the keratin essence was effective to protect hair structure against the structural damage induced by the dyeing-treatment, by which the coloring efficiency is thought to be improved.

• 한국전기전자재료학회논문지
• /
• 제21권8호
• /
• pp.760-765
• /
• 2008

Low power laser therapy is internationally certified and is known to be effective in stimulating DNA in living organisms, increasing protein synthesis and activating cell division, smoothing blood circulation, promoting cell activation, cell regeneration and function. It also has anti-inflammatory, anti-edemic, anti-fibrous dysplastic and neuralogic hyperfunctional effects. This study was intended to verify the effect of LED irradiation therapy on wound healing in cell and animal tests by applying LED irradiator using a laser and laser diode, which was independently designed and developed to emit beams of similar wavelength to that of a laser. This equipment was fabricated using a micro-controller and a high brightness LED, and designed to enable us to control light irradiation time, intensity and reservation. In case of cell proliferation experiment, each experiment was performed to irradiation group and non-irradiation group for tissue cells. MTT assay method was chosen to verify the cell increase of two groups and the effect of irradiation on cell proliferation was examined by measuring 590 nm transmittance of micro-plate reader. In the wound healing experiment, 1$cm^2$ wounds on the skin wound of SD-Rat(Sprague-Dawley Rat) were made. Light irradiation group and none light irradiation group divided, each group was irradiated one hour a day for 9 days. As a result, the cell increase of tissue cells was verified in irradiation group as compared to non-irradiation group. And, compared with none light irradiation group, the lower incidence of inflammation and faster recovery was shown in light irradiation group.

• 한국정보기술학회논문지
• /
• 제17권6호
• /
• pp.9-16
• /
• 2019

최근 제조 공정을 개선하려는 기업들은 스마트 팩토리를 도입, 이에 따른 도약이 특별히 눈에 띈다. 이는 최소한의 수동 제어를 통해 완벽하게 생산시설의 프로세스를 수행하는 스마트 팩토리의 영역을 최대화하고 추론의 오차를 최소화 하는 것이 최종 목적이다. 본 연구는 무인 생산, 관리, 포장, 배송 관리를 위한 프로젝트의 일부로써 무인생산의 자동화 설비의 철근 추적을 통해 롤러의 자동 교정을 수행하기 위해 철근 추적 시작점 검출에 대한 연구이며, 시작지점부터 끝점까지의 위치를 정확히 추적해야 하는 요구사항을 만족해야 한다. 추적성능을 높이기 위해서는 시작점 설정이 주요한데 기존의 시간 기반 검출방법을 통해서는 조도, 분진 등 환경에 따라 추적오류의 발생 확률이 높다. 본 논문에서는 환경에 따른 오차를 줄이기 위해 고속 IR카메라의 평균 밝기 변화를 이용한 시작점 검출 방법을 제안하며, 제안 사항을 통해 15%이상의 성능 향상을 확인하였다.

• 한국조리학회지
• /
• 제12권2호
• /
• pp.195-205
• /
• 2006

복분자 착즙액을 첨가한 호상 요구르트를 제조하기 위하여 skim milk에 S. thermophilus, L. acidophilus와 L. casei를 혼합한 균주를 접종하여 복분자 착즙액이 요구르트의 품질 특성에 미치는 영향을 조사하였다. pH는 전반적으로 발효기간중 감소하는 경향을, 산도는 증가하는 경향을 나타냈다. 생균수 변화에 있어서 복분자 착즙액의 첨가는 농도에 따라 생육을 촉진하기도 하고 저해하기도 하는 것으로 나타났으나, 4% 첨가농도까지는 안정된 발효를 유도하는 결과를 보였다. 성분 분석 결과를 살펴보면, 대조구와 복분자 착즙액 첨가구별 단백질, 유당, 유리지방산 함량에서는 시료간 비슷한 값을 보였고, 복분자 착즙액의 첨가량에 따라 총고형분함량은 증가하였다. 기호도 검사에서는 3% 복분자즙 첨가구가 색, 향, 맛, 후미 및 종합적인 기호도에서 가장 높은 선호도를 나타내었다.

• 전기학회논문지P
• /
• 제66권4호
• /
• pp.242-246
• /
• 2017

In this study, it was investigated about optical simulation in high brightness and high uniformity general lighting using glass light guide plate. And we adopt edge-light emission type light plate. Edge-light type lighting has been used LCD application, especially note PC or smart phone backlight unit. Because it had the good properties such as slim shape and light weight. We thought this type was suitable for general lighting application such as wall attached type or ceiling mount type. But many of edge-light type lighting had problems. It called slanted output light rays. That was main key parameter how could control the direction of output light rays. We investigated the solution of this problems, using ray tracing method, we recognized the major fact of the solution relied on the geometric structure of diffusing dot shape. We set the conditions of aspect ratio in diffusing dot shape such as 0.5 to 1. And, at first, we designed diffusing dots shape based on the results of optical simulation and made specimen. as above condition, and acquired good result in confirming dots shape such as the value of the output rays's peak angle was around 75 degrees. And good light distribution characteristics were measured by slated spectro-radiometer. It was shown that the effective ways of designing light distribution characteristics using optical simulation such as ray tracing linear method for making general lighting using glass light guide plate.

• International Journal of Precision Engineering and Manufacturing
• /
• 제7권2호
• /
• pp.41-45
• /
• 2006

This paper deals with human spatial cognition using visual and auditory stimulation. More specially, this investigation is to observe the relationship between the head and the eye motor system for the localization of visual target direction in space and to try to describe what is the role of right-side versus left-side pinna. In the experiment of visual stimulation, nineteen red LEDs (Luminescent Diodes, Brightness: $210\;cd/^2$) arrayed in the horizontal plane of the surrounding panel are used. Here the LEDs are located 10 degrees apart from each other. Physiological parameters such as EOG (Electro-Oculography), head movement, and their synergic control are measured by BIOPAC system and 3SPACE FASTRAK. In the experiment of auditory stimulation, one side of the pinna function was distorted intentionally by inserting a short tube in the ear canal. The localization error caused by right and left side pinna distortion was investigated as well. Since a laser pointer showed much less error (0.5%) in localizing target position than FASTRAK (30%) that has been generally used, a laser pointer was used for the pointing task. It was found that harmonic components were not essential for auditory target localization. However, non-harmonic nearby frequency components was found to be more important in localizing the target direction of sound. We have found that the right pinna carries out one of the most important functions in localizing target direction and pure tone with only one frequency component is confusing to be localized. It was also found that the latency time is shorter in self moved tracking (SMT) than eye alone tracking (EAT) and eye hand tracking (EHT). These results can be used in further study on the characterization of human spatial cognition.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.432.2-432.2
• /
• 2014

Recently, colloidal core/shell type quantum dots lighting-emitting diodes (QDLEDs) have been extensively studied and developed for the future of optoelectronic applications. In the work, we fabricate an inverted CdSe/ZnS quantum dot (QD) based light-emitting diodes (QDLED)[1]. In order to reduce work function of indium tin oxide (ITO) electrode for inverted structure, a very thin (<10 nm) polyethylenimine ethoxylated (PEIE) is used as surface modifier[2] instead of conventional metal oxide electron injection layer. The PEIE layer substantially reduces the work function of ITO electrodes which is estimated to be 3.08 eV by ultraviolet photoemission spectroscopy (UPS). From transmission electron microscopy (TEM) study, CdSe/ZnS QDs are uniformly distributed and formed by a monolayer on PEIE layer. In this inverted QD LED, two kinds of hybrid organic materials, [poly (9,9-di-n-octyl-fluorene-alt-benzothiadiazolo)(F8BT) + poly(N,N'-bis (4-butylphenyl)-N,N'-bis(phenyl)benzidine (poly-TPD)] and [4,4'-N,N'-dicarbazole-biphenyl (CBP) + poly-TPD], were adopted as hole transport layer having high highest occupied molecular orbital (HOMO) level for improving hole transport ability. At a low-operating voltage of 8 V, the device emits orange and red spectral radiation with high brightness up to 2450 and 1420 cd/m2, and luminance efficacy of 1.4 cd/A and 0.89 cd/A, respectively, at 7 V applied bias. Also, the carrier transport mechanisms for the QD LEDs are described by using several models to fit the experimental I-V data.

• 한국콘텐츠학회논문지
• /
• 제6권11호
• /
• pp.161-171
• /
• 2006

색채는 시각이미지 표현의 중요한 조형요소로서 그 표현력이 증대되고 있다. 그러나 색채의 가변적인 특성과 함께 화면 내에서 조응하는 다른 조형요소와의 관계성은 색채의 효과적인 표현을 어렵게 한다. 디즈니사에서 제작된 <뮬란>과 <라이온 킹>에 나타난 그림스타일은 색채사용에 있어서 상당한 표현상의 차이가 있다. 두 작품의 색채사용에 대한 차이점과 그 원리를 규명하여 색채를 적절히 활용할 수 있는 방안을 세우고자 한다. 연구 방법으로는 색채가 가지고 있는 표현적인 특성을 다른 조형요소들과의 관계 속에서 어떻게 활성화시킬 수 있는가의 문제에 초점을 맞추었다. 결론적으로 색채는 빛의 속성 중 하나이지만 빛의 또 다른 속성인 밝고 어두움, 즉 콘트라스트(contrast)에 가장 큰 영향을 받는다는 것이다. 이것은 조형의 질서를 구축하는데 우선적으로 고려해야 할 사항 중 하나이다. 따라서 색채의 표현적인 특성을 강조하기 위해서는 다른 조형요소들과의 관계를 조절해야 하고 특히 명도와 형태의 표현적인 힘을 약화시켰을 때 가능해 진다.

• Journal of Astronomy and Space Sciences
• /
• 제40권4호
• /
• pp.173-197
• /
• 2023

ShadowCam is a high-sensitivity, high-resolution imager provided by NASA for the Danuri (KPLO) lunar mission. ShadowCam calibration shows that it is well suited for its purpose, to image permanently shadowed regions (PSRs) that occur near the lunar poles. It is 205 times as sensitive as the Lunar Reconnaissance Orbiter Camera (LROC) Narrow Angle Camera (NAC). The signal to noise ratio (SNR) is greater than 100 over a large part of the dynamic range, and the top of the dynamic range is high enough to accommodate most brighter PSR pixels. The optical performance is good enough to take full advantage of the 1.7 meter/pixel image scale, and calibrated images have uniform response. We describe some instrument artifacts that are amenable to future corrections, making it possible to improve performance further. Stray light control is very challenging for this mission. In many cases, ShadowCam can image shadowed areas with directly illuminated terrain in or near the field of view (FOV). We include thorough qualitative descriptions of circumstances under which lunar brightness levels far higher than the top of the dynamic range cause detector or stray light artifacts and the size and extent of the artifact signal under those circumstances.