• 제어로봇시스템학회논문지
• /
• 제22권11호
• /
• pp.925-931
• /
• 2016

The BLDC motor is used widely in industry due to its controllability and freedom from maintenance because there is no mechanical brush in the BLDC motor. Furthermore, it is suitable for high-speed applications, such as compressors and air blowers. For instance, for a compressor with a small impeller due to miniaturizing, the BLDC motor has to rotate at a very high speed to maintain the compression ratio of the compressor. Typically, to reach an ultra-high speed, airfoil bearings must be used in place of ball bearings because of their friction. Unfortunately, the characteristics of airfoil bearings change drastically depending on the revolution speed. In this paper, a BLDC motor with airfoil bearings is controlled with a PID controller. To analyze and determine the PID coefficients, the relay-feedback method is used. Additionally, for adaptive control, a fuzzy logic controller is used. Furthermore, the auto-tuning and self-tuning techniques are combined to control the BLDC motor. The proposed method is able to control the airfoil-bearing BLDC motor efficiently.

• 한국구조물진단유지관리공학회 논문집
• /
• 제6권2호
• /
• pp.145-155
• /
• 2002

It is essential for health monitoring of a cable-stayed bridge to provide more accurate and enough information from the sensors. In experimental modal testing, the chosen measurement locations and the number of measurements have a major influence on the quality of the results. The choice is often difficult for complex structures like a cable-stayed bridge. It is extremely important a cable-stayed bridge to minimize the number of sensing operations required to monitor the structural system. In order to obtain the desired accuracy for the structural test, several issues must take into consideration. Two important issues are the number and location of response sensors. There are usually several alternative locations where different sensors can be located. On the other hand, the number of sensors might be limited due to economic constraints. Therefore, techniques such as methodologies, algorithms etc., which address the issue of limited instrumentation and its effects on resolution and accuracy in health monitoring systems are paramount to a damage diagnosis approach. This paper discusses an optimum sensor placement criterion suitable to the identification of structural damage for continuous health monitoring. A Kinetic Energy optimization technique and an Effective Independence Method are analyzed and numerical and theoretical issues are addressed for a cable-stayed bridge. Its application to a cable-stayed bridge is discussed to optimize the sensor placement for identification and control purposes.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1220-1224
• /
• 2003

In this paper, we measured the radiation dose of a fuel handling machine of the CANDU type Wolsong nuclear reactor directly during operation, in spite of the high radiation level. In this paper we will describe the sensor development, measurement techniques, and results of our study. For this study, we used specially developed semiconductor sensors and matching dosimetry techniques for the mixed radiation field. MOSFET dosimeters with a thin oxide, that are tuned to a high dose, were used to measure the ionizing radiation dose. Silicon diode dosimeters with an optimum area to thickness ratio were used for the radiation damage measurements. The sensors are able to distinguish neutrons from gamma/X-rays. To measure the radiation dose, electronic sensor modules were installed on two locations of the fuel handling machine. The measurements were performed throughout one reactor maintenance cycle. The resultant annual cumulative dose of gamma/X-rays on the two spots of the fuel handling machine were 18.47 Mrad and 76.50 Mrad, and those of the neutrons were 17.51 krad and 60.67 krad. The measured radiation level is high enough to degrade certain cable insulation materials that may result in electrical insulation failure.

• 한국컴퓨터정보학회논문지
• /
• 제9권3호
• /
• pp.1-6
• /
• 2004

객체 모델링 기법의 그래픽 표현을 이용하여 자료의 추상화, 캡슐화, 모듈화, 계층화 할 수 있는 새로운 그래픽 정보시스템 개발 기술이 절실히 필요하다. 그래픽 자료의 추상화 방법을 개선하기 위하여 복합객체 기술로 자료의 추상화와 계층화 개념을 기반으로 모델링하였으며, 메쉬, 레이어, 세그먼트, 인스턴스 등과 같은 여러 가지 도형요소의 클래스들을 지원하는 분류화와 다중상속 관계모델을 제안한다. 객체 모델링 기법과 스파이스 참조 모델을 이용하여 간단한 그래픽 정보시스템 개발사례를 통하여 소프트웨어 개발주기와 소프트웨어 유지보수 비용을 줄일 수 있는 요구사항을 지원하는 객체 표현 방법의 데이터 모델링 기법을 비교하고 평가한다.

• 정보처리학회논문지:소프트웨어 및 데이터공학
• /
• 제5권5호
• /
• pp.209-220
• /
• 2016

최근 스마트폰, 태블릿과 같은 기기의 사용량이 증가하면서, 이에 탑재되는 소프트웨어는 더욱 복잡해지고 규모가 커지고 있다. 배터리의 전력으로 구동되는 모바일 기기들은 전력 공급의 한계로 인해 운용시간을 증가시키는 것이 중요한 이슈이다. 최근에는 소프트웨어 동작이 하드웨어 구동을 통해 전력 소모를 일으킨다는 점에서, 효율적인 동작 패턴을 갖는 소프트웨어 개발에 대한 연구들이 진행되고 있다. 그러나 모바일 기기에 탑재되는 소프트웨어는 그 개발 주기가 짧은 경우가 많아 최적화와 전력 소모량을 반영하기 어려운 경우가 많다. 따라서 본 연구에서는 소모전력 절감을 위한 코드 리팩토링 기법을 제안하여, 소프트웨어 개발 및 유지보수에서 보다 용이하게 저전력 요구사항을 충족시키고자 한다. 이를 위해 전력 소모량을 감소시킬 수 있는 코드 패턴에 대하여 Energy Bad Smell을 식별하고, 이를 제거하기 위한 새로운 코드 리팩토링 기법을 제안하며, 실험을 통해 그 효용성을 검증하였다.

• Journal of Chest Surgery
• /
• 제44권6호
• /
• pp.387-391
• /
• 2011

Background: The relationship between the degree of expression of matrix metalloproteinases or tissue inhibitor of metalloproteinases and venous reflux remains to be investigated. Materials and Methods: Primary varicose vein tissues were obtained from 23 patients, 18 females and 5 males, aged from 19 to 73. Cephalic or basilic veins were obtained for the control group from 10 patients who underwent vascular access for maintenance hemodialysis. Two operative techniques (high ligation with stripping or endovenous laser coagulation) were used. The expression of matrix metalloproteinase-2 and 13 and tissue inhibitor of metalloproteinase-4 in the varicose vein group and control group was assessed semi-quantitatively by immunohistochemical slides stained with primary antibodies. Results: Twenty (87%) of the varicose vein group patients had greater or lesser saphenous vein diseases with reflux. The focal weak (+) stain for matrix metalloproteinases-2, and 13, and tissue inhibitor of matrix metalloproteinase-4 was dominant in the varicose vein group; the focal or diffuse strong stain (++ or +++) was prevalent in the control group. The differences were statistically significant (p<0.01). The degree of reflux and the duration of symptoms were not significantly related to the expression of MMP-13 (p=0.317 and p=0.654, respectively). Conclusion: Further study should be performed to investigate the relationship between the clinical characteristics related to venous hypertension or reflux and expression of MMPs and TIMP in varicose veins.

• 한국구조물진단유지관리공학회 논문집
• /
• 제18권4호
• /
• pp.118-125
• /
• 2014

본 논문은 기존 수중 콘크리트 구조물의 강도관리 및 진단기술의 중요성은 날로 증가함에 따라 개발되고 있는 ROV (Remote Control Vehicle)에 탑재될 수 있는 비파괴 검사 장비를 개발하여 콘크리트 내부의 강도측정을 하고자하였다. 수중화된 슈미트해머와 초음파센서를 통하여 수중에 있는 콘크리트 공시체의 반발경도 및 초음파속도를 계측하여 실제 압축강도 값과 비교하였으며 이를 통하여 수중에서의 강도추정식을 도출하였다. 도출된 3가지 식 중에서 반발경도와 초음파속도를 복합적으로 사용하는 복합식이 가장 정확도가 높았으며 이에 따라 실제 수중에서의 콘크리트의 강도를 추정하고자 할 때 활용 가능성도 높아질 것으로 예상된다.

• 한국농공학회논문집
• /
• 제50권3호
• /
• pp.31-41
• /
• 2008

There are many agricultural facilities (46.7%) that have been over 30 years in the Republic of Korea (the ratio of reservoirs built before 1945 is 53%, from 1946 to 1971 is 35%). In the case of reservoirs which do most important functions among these facilities, only 3,000 reservoirs are managed by Korea Rural Community & Agriculture Corporation (KRC) and the other 15,000 reservoirs are managed by local authorities (City and Gun). But, 15,000 reservoirs included in City. Gun have been built in more wide area than KRC and the reservoir management system has not been operated well because of shortage of budget and manpower of the local authorities. Particularly, the abnormal weather happened during every summer season recently has ruined a lot of rural community facilities. So flood control function have been more important than irrigation function in agricultural reservoir system and it may be required to introduce new safe, management and maintenance techniques in City Gun reservoirs. So we investigated landscapes and deteriorations of agricultural reservoirs managed by local small governments for revealing not only present usage but also future value. Survey shows that there are no structural managements except typical hydrological reportings and the deterioration of small darn is very serious. There are needs for more systematic management system and equipment methods. Therefore, this study may suggest that reservoir (that takes charge of the greatest deal of weight in all agricultural facilities) must be considered as new concept of the usage and the unification. On the other hand, reservoir must be also developed as amenity resources, natural circumstances and district values.

• 한국HCI학회:학술대회논문집
• /
• 한국HCI학회 2006년도 학술대회 1부
• /
• pp.931-936
• /
• 2006

This paper presents different issues of the real-time compression algorithms without compromising the video quality in the distributed environment. The theme of this research is to manage the critical processing stages (speed, information lost, redundancy, distortion) having better encoded ratio, without the fluctuation of quantization scale by using IP configuration. In this paper, different techniques such as distortion measure with searching method cover the block phenomenon with motion estimation process while passing technique and floating measurement is configured by discrete cosine transform (DCT) to reduce computational complexity which is implemented in this video codec. While delay of bits in encoded buffer side especially in real-time state is being controlled to produce the video with high quality and maintenance a low buffering delay. Our results show the performance accuracy gain with better achievement in all the above processes in an encouraging mode.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
• /
• pp.1-9
• /
• 2004

Repair of concrete structures has been a focus of attention in recent years not only in Japan but also worldwide. Concrete structures have fallen short of expectations at the time of construction-they should have been perpetual and maintenance-free. However, investigation into their premature deterioration reveals the primary causes: Concrete was made using inadequate materials and/or inadequate mixture proportions due to insufficient consideration and was placed inadequately under insufficient execution control. The secondary causes include insufficient consideration at the time of construction for the environmental conditions to which the structures were to be exposed. In any event, in the current economic climate, structures cannot be demolished and rebuilt as soon as they are damaged, but instead are expected to continue to be in service as long as possible with appropriate repair or retrofitting. This paper analyzes the causes of deterioration requiring repair and introduces relevant repair techniques. At the end, the repair project of the Sanyo Shinkansen Line in which the author was involved through committee activities is reported.