• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2011년도 추계학술발표대회 논문집
• /
• pp.264-269
• /
• 2011

A precision of temperature control in the manufacturing process would be an important factor and become the main key to control production quality. Mostly manufacture machinery used oil as a coolant in their system so an accurate oil temperature control system become an absolute need in industrial field. This paper presents a experiment research to control the oil temperature constant at target point, in this experiment is $35^{\circ}C$ by using an inverter attached in compressor to varying the compressor speed. This control has been completed and tested through an experiment with different heat load of 4kW, 6kW, 7kW, 8kW and 10kW given under temperature constant room conditioned as $25^{\circ}C$. The results had shown the temperature deviation in the refrigerator has around $0.2^{\circ}C$ and the COP is 2.5 gained at 8kW and 10kW.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.77-80
• /
• 1997

In this paper presented is a temperature controller for a semiconductor test handler. Using ARMAX model and least square method, the chamber model for the design of a controller is identified through experiment. With the identified model an LQG/LTR controller is designed. Experiment with a real test handler demonstrated good performance in that its overshoot is small and response time is fast.

• 오토저널
• /
• 제3권1호
• /
• pp.46-53
• /
• 1981

This paper describes emission control of hydrocarbon and carbon-monoxide due to oxidizing catalyst. The experiment was performed on a precious metal pelleted catalyst(Pt). The factors of the efficiency for purification due to oxidizing catalyst are space velocity, temperature, composition of exhaust gas and supplementary air. The experiment was carried out to control the factors of efficiency for purification. The results of experimental study show that temperature of catalytic converter, supplementary air and space velocity affected the efficiency for purification of hydrocarbon and carbon monoxide.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 학술대회 논문집 전문대학교육위원
• /
• pp.129-131
• /
• 2000

The moving vehicle with disturbances has the 6 degree of freedom motion in the pitching, Yawing, and rolling directions of two independent axes. The control system in such a moving vehicle has to perform disturbance rejection. This paper present PID controller with disturbance rejection function, low sensitivity filter and notch filter for bending frequency rejection. The performance of a designed system has been certified by the simulation and experiment and experiment results.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.113-116
• /
• 1990

In this paper, An expert system for electric furnace with time delay is proposed. The expert system uses Fuzzy control theory. The conventional controller uses Auto-Tuning control theory. From experiment, we can obtain that the response of expert system is superior to the response of the conventional controller. In this experiment, the expert controller is implemented with the IBM PC. The 8751 One chip processor controling the electric furnace is used.

• 한국초지조사료학회지
• /
• 제18권2호
• /
• pp.107-112
• /
• 1998

This experiment was carried out to investigate effects of herbicide application method on Abutilon avicennae control and corn yield at the forage experimental field, grassland and forage crop division, National Livestock Research Institute, RDA, Suwon from 1996 to 1997. The experiment was arranged in a randomized block design with three replication. The herbicide application consisted of control, 2-3 leaf stage(Dicamba), 5-6 leaf stage (Dicamba) and soil treatment(Pendimetha1in). The hybrid of corn used in this experiment was P 3352. The results obtained are summarized as follow; 1. The plant and ear height was the lowest at control. Tasseling and silking date were delayed 3-4 day at control. The length and weight of ear were the highest at Dicamba treatment in 2-3 leaf stage. 2. The herbicide injury of corn was detected slightly after 10-20 day but the injury was recovered soon. The weed control efficiency was 96.7 and 81.8% at Dicamba treatment in 2-3 and 5-6 leaf stage, respectively. 3. The fresh and dry matter yield of Dicamba treatment in 2-3 leaf stage was higher than that of control by 36%, but no significant difference was found among herbicide application method. 4. Herbicide application method had little effect on the ADF, NDF and CP contents, but the CP and IVDMD of ear were higher than that of stover. The results of this experiment indicate that the application of Dicarnba in 2-6 leaf stage of corn will remove almost all of A butilon avicennae and increase DM yield of corn.

• Journal of Electrical Engineering and Technology
• /
• 제11권3호
• /
• pp.775-780
• /
• 2016

This induced voltage measurement test and electromagnetic field simulation are related to the possibility of control signal malfunction by power line. Through an experiment, this research analyzed whether the voltage causing control malfunction according to the on/off status of power permitted to power line was induced to control signal line. Also, the research calculated the voltage induced to control signal line and examined the phenomenon by conducting an electro-magnetic field-specific simulation through the finite element method for the cable model used in the experiment.

• Structural Engineering and Mechanics
• /
• 제46권4호
• /
• pp.549-569
• /
• 2013

A passive control using flaps will be an alternative solution for flutter stability and buffeting response of a long suspension bridge. This method not only enables a lightweight economic stiffening girder without an additional stiffness for aerodynamic stability but also avoid the problems from the malfunctions of control systems and energy supply system of an active control by winglets and flaps. A time domain approach for predicting the coupled flutter and buffeting response of bridge deck with flaps is investigated. First, the flutter derivatives of bridge deck and flaps are found by experiment. Next, the derivation of time domain model of self-excited forces and control forces of sectional model is reported by using the rational function approximation. Finally, the effectiveness of passive flap control is investigated by the numerical simulation. The results show that the passive control by using flaps can increase the flutter speed and decrease the buffeting response. The experiment results are matched with numerical ones.

• Asian-Australasian Journal of Animal Sciences
• /
• 제24권8호
• /
• pp.1100-1111
• /
• 2011

Two experiments under sham feeding conditions were conducted to determine whether or not ruminal distension brought about by feed boluses entering the rumen is a factor in the marked suppression of feed intake after 40 min of feeding. In experiment 1, a comparison was made between the intraruminal insertion of a water filled balloon (RIB) treatment and normal control (non-insertion of a balloon, NIB). In experiment 2, saliva lost due to sham feeding conditions was replenished via an intraruminal infusion of iso-osmotic artificial saliva. A comparison of dry forage intake was then conducted between the intraruminal replenishment of iso-osmotic artificial saliva and insertion of a balloon (RRIAS-RIB) treatment, and the intraruminal replenishment of iso-osmotic artificial saliva and non-insertion of a balloon (RRIAS-NIB) control. In experiment 1, eating rates in the RIB treatment 30 min after the commencement of feeding tended to be lower than those in the NIB control. In comparison with the NIB control, cumulative dry forage intake in the RIB treatment was 29.7% less (p<0.05) upon conclusion of the 2 h feeding period. The secreted saliva weight in the NIB control and the RIB treatment during the 2 h feeding period was 53.2% and 60.9% total weight of the boluses, respectively. In experiment 2, eating rates in the RRIAS-RIB treatment 30 min after the commencement of feeding was significantly lower (p<0.05) than those in the RRIAS-NIB control. Cumulative dry forage intake in the RRIAS-RIB treatment was a significant 45.5% less (p<0.05) compared with that in the RRIAS-NIB control upon conclusion of the 2 h feeding period. The secreted saliva weight in the RRIAS-NIB control and the RRIAS-RIB treatment during the 2 h feeding period was 54.1% and 64.2% total weight of the boluses, respectively. The level of decrease in dry forage intake in the RRIAS-RIB treatment of experiment 2 was larger than that in the RIB treatment of experiment 1. In the present experiments, due to the sham feeding conditions, the increases in osmolality of ruminal fluid and plasma, and a decrease in ruminal fluid pH which are normally associated with feeding were not observed. The results indicate that the marked decrease in feed intake observed in the second hour of the 2 h feeding period is related to ruminal distension caused by the feed consumed and the copious amount of saliva secreted during dry forage feeding.

• 동의생리병리학회지
• /
• 제19권3호
• /
• pp.736-742
• /
• 2005

This study was carried out to investigate the inhibiting and repairing effects of Bojung-ikki-tang Gamibang(BI-G) on the bone marrow injuries in rats. Bone marrow injury was induced by a single intraperitoneal injection of cyclophosphamide(CP)(150mg/kg). In experiment I, designed for inhibiting effect, extract of BI-G(80mg) was administrated from pre-5 days to post-5 days of CP injection. In experiment II, designed for repairing effect, extract of BI-G(80mg) was administrated after 5 days to 12 days of CP injection. Hematological and histopathological examinations were performed at 5 days after CP injection in experiment I, and at 12 days after CP injection in experiment II. In experiment I, the results were as follows ; RBC(${\times}10^6/{\mu}l$) of BI-G treated group$(8.39{\pm}0.84)$ was increased significantly compared with control group$(7.52{\pm}7.67)$. Hemoglobin(g/dl) of BI-G treated group$(13.76{\pm}1.20)$ was increased significantly compared with control group$(12.24{\pm}1.11)$. WBC(${\times}10^3/{\mu}l$) of BI-G treated group$(1.75{\pm}0.41)$ was increased significantly compared with control group$(0.55{\pm}0.17)$. Necrotic changes of myeloid cells of BI-G treated group were less severe than those of control group. Histopathologically, distention of sinus and edematous changes of bone marrow of BI-G treated group were alleviated compared with those of control group. In experiment II, the results were as follows ; WBC(${\times}10^3/{\mu}l$) of BI-G treated group(4.27 0.94) was increased significantly compared with control group$(3.02{\pm}0.79)$. Hemoglobin(g/dl) of BI-G treated group$(12.61{\pm}0.85)$ was increased significantly compared with control group$(11.49{\pm}0.74)$. Platelets(${\times}10^3/{\mu}l$) of BI-G treated group$(1885{\pm}133)$ was increased significantly compared with control group$(1616{\pm}251)$. These results indicated that Bojung-ikki-tang Gamibang has the inhibiting and repairing effects on the cyclophosphamide-induced bone marrow injuries in rats.