• Journal of Animal Environmental Science
• /
• v.9 no.1
• /
• pp.57-60
• /
• 2003

앞으로 친환경 유기농업을 위한 축산환경 보전 및 퇴비 유통과 이용을 촉진하기 위해서는 대기, 수질, 토양오염 등의 환경오염을 방지하는 축산 환경기술 개발뿐만 아니라, 축분퇴비품질 기준면에서 경종농가 작물 사용에 적합한 고품질 퇴비제조와 간단한 평가 방법의 확립이 필요한 시점에 와 있다.

• Journal of the Korean Geotechnical Society
• /
• v.39 no.11
• /
• pp.85-95
• /
• 2023

This study implemented intelligent compaction technology at the construction site of the AY Highway in Gyeonggi Province, with a focus on obtaining the representative intelligent compaction value, CMV. The target CMV for quality control was established through trial construction, and the validation of the compaction quality control process based on intelligent compaction was conducted. The optimal approach for determining the target CMV was confirmed to be through linear regression of the average CMV measured within a 5-m radius from the plate load testing location. Upon assessing compaction quality against the target CMV, it was observed that the quality criteria outlined in the domestic intelligent compaction standard were met. However, the criteria outlined in Austria and the United States were not satisfied. Notably, indicators related to the variability of compaction quality did not meet the specified criteria, suggesting a stringent standard compared to the observed variability of CMV, ranging from 17% to 55%. Consequently, it is recommended to conduct additional field tests to further validate the compaction quality control process based on intelligent compaction. This will aid in confirming and enhancing the appropriateness of the regulations stipulated in each standard.

• Journal of Biosystems Engineering
• /
• v.12 no.2
• /
• pp.28-37
• /
• 1987

Operation of rice whiteners has been depending on operator's experience only and very limitted data are available for operational criteria of rice whiteners in Korea. With developments of new rice varieties and with a tendency of automation of machine operations for precision control, operational criteria depending on physical characteristics of rice grains arc required for an improvement of milled rice recovery and the performance of rice whitening systems. An experimental study was conducted to identify operational criteria of a rice whitening system consisted with an abrasive-aerated whitener developed newly and a frictional-aerated whitener being used commercially. Further, comparisons were made between the performance of the rice whitening system adopted for this study and a commercial system used in small scale milling plants. Results of this study are summarized as follows: 1. Total number of passes necessary for the final white rice in the combined whitening system depended exclusively on the counter pressure level of the frictional whitener successive to the abrasive whitener. 2. The counter pressure required for whitening Japonica type rice variety (Akibare) was higher by about 1.6 times than that for Japonica type (Pung-san), when other conditions were kept at the same. 3. Radial pressure in the whitening chamber of the frictional whitener should be maintained between 1.5 to $2.1kg/cm^2$ for the completion of whitening within 5 to 3 passes regardless of rice varieties. Hence, it was found that the radial pressure in the whitening chamber could be used as an operational criteria to control the counter pressure level. 4. The following regression equation was found between radial pressure($R_p$) in whitening chamber and electric power consumption of the whitening system: $$EPC=-0.545\;R^2_p+1.277\;R_p+0.874[KWH/100kg]$$ 5. The following multiple regression equation was found among radial pressure ($R_p$), counter pressure ($C_p$), and bioyield point ($B_i$), length (L) and width (W) of brown rice. $$R_p/(B_i/W^2)=0.547\{C_p/(B_i/W^2)\}^{0.365}(L/W)^{0.120}(R^2=0.9897)$$ 6. The milled rice recovery and machine efficiency (kg/KWH) from the combined whitening system were higher by about 2.0% point and by 15 to 27% point than those from the conventional system, respectively.

• Clinical and Experimental Pediatrics
• /
• v.57 no.8
• /
• pp.357-362
• /
• 2014

Purpose: The incidence of Kawasaki disease (KD) is rare in young infants (less than 3 months of age), who present with only a few symptoms that fulfill the clinical diagnostic criteria. The diagnosis for KD can therefore be delayed, leading to a high risk of cardiac complications. We examined the clinical characteristics and measured the serum levels of N-terminal pro-brain natriuretic peptide (NT-proBNP) levels of these patients for assessing its value in the early detection of KD. Methods: We retrospectively reviewed the data of young infants diagnosed with KD from 2004 to 2012. The control group included 20 hospitalized febrile patients. Laboratory data, including NT-proBNP were obtained for each patient in both groups. Results: Incomplete KD was observed in 21/24 patients (87.5%). The mean fever duration on admission was $1.36{\pm}1.0$ days in the KD group. Common symptoms included erythema at the site of Bacille Calmette-Guerin inoculation (70.8%), skin rash (50.0%), changes of oropharyngeal mucosa (29.1%), and cervical lymphadenopathy (20.8%). The mean number of major diagnostic criteria fulfilled was $2.8{\pm}1.4$. Five KD patients (20.8%) had only one symptom matching these criteria. The incidence of coronary artery complications was 12.5%. The mean serum NT-proBNP level in the acute phase, in the KD and control groups, were $4,159{\pm}3,714pg/mL$ and $957{\pm}902pg/mL$, respectively, which decreased significantly in the convalescent phase. Conclusion: Incomplete KD was observed in 87.5% patients. Serum NT- proBNP might be a valuable biomarker for the early detection of KD in febrile infants aged <3 months.

• Journal of the Korean Society of Safety
• /
• v.31 no.5
• /
• pp.177-186
• /
• 2016

When an event is occurred in a nuclear power plant (NPP), the NPP operator reports it referred by the regulation on reporting and public announcement of accidents and incidents. Some of the events do not need to be reported because they are not included in the reporting criteria of the regulation. However, it is necessary that they should be managed effectively because the accident can be occurred by the recurrence of a lot of them as precursors. Among the events not included in the reporting criteria of the regulation, near miss is the event that is not occurred but can generate a significant consequence. This can provide the cause of the event which does not result an accident. So, it is able to offer insightful knowledges to prevent higher level events about the function and process of NPP. The objective of this study is to analyze the issues of near miss events, prepare the defence against the risk, and improve the management process of NPP. To achieve it, this study performed to analyze the management structure and status of near miss events as well as the accident reporting system of the domestic and foreign regulation bodies. In case of Korea, the status was analyzed by quantitative data, licensee event reports and procedures. Based on these, we could find the causes that near miss events were not managed effectively. Then, systematic alternatives that reflected the perspective of man, technology and organization were drawn.

• Journal of the Korean Geosynthetics Society
• /
• v.11 no.1
• /
• pp.65-75
• /
• 2012

Since the modem reinforced soil wall technology was introduced in domestic civil engineering society in the year 1980, the reinforced soil walls have been extensively used because these technologies have advantages such as economical efficiency, graceful appearance, and easy construction. This paper describes the application of reinforced soil wall, design criteria, and construction problems. Many cases of troubles, which include a severe deformation of facing, cracks of facing block, overall sliding failure and so on, have been reported. Inappropriate design and construction management mainly induce these problems. The technological level of design and quantity control for reinforced soil wall is not sufficiently supported to cope with the growth quantity of reinforced soil wall construction market and the increasing number of construction companies. The unified standard design and construction criteria of reinforced soil wall should be established with the detail consideration of overall performance and stability. The quality control of design and construction, and cost of construction must be seriously executed to construct a high quality of reinforced soil wall.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.47 no.2
• /
• pp.114-121
• /
• 2019

Tailless aircraft have advantages of low visibility compared to conventional aircraft, but drawback of poor stability as well which makes designing controller difficult. The controller design is more difficult, especially when the center of gravity moves due to store release or fuel consumption during flight. In this paper, an L1 adaptive controller is proposed as a way to overcome these problems. The reliability and performance of the controllers were verified by non-linear simulations. RPV Flying Quality Design criteria were used for design criteria. Using the simulation, it is shown that the adaptive controller maintains stability of the unmanned aircraft for sudden large change in the inertial properties. It is also shown that the calculation burden can be reduced when it is used with the gain scheduling method.

• Journal of Oral Medicine and Pain
• /
• v.43 no.4
• /
• pp.125-130
• /
• 2018

Purpose: The etiology of temporomandibular disorders (TMDs) is complex and multifactorial including trauma, anatomical, pathophysiological, social and psychological factors. Psychological factors can induce or sustain TMDs in various ways. And psychological problems, such as anxiety and depression can be occurred due to TMDs. Therefore, evaluation of psychological factors in patients with TMDs is important. Although disc displacement (DD) is crucial in clinical situation, most of studies have focused on the relationship of psychosocial factors and myofascial pain. And also, Subtypes of DD can cause different degrees of discomfort, it is necessary to evaluate the psychological states of the patients according to the subtype. The Hospital Anxiety Depression Scale (HADS) is one of the self-report questionnaire to evaluate the psychological factors. HADS-Anxiety (HADS-A) and HADS-Depression (HADS-D) are assessed through 14 questions. The purpose of this study was to evaluate anxiety and depression assessed by HADS in patients diagnosed with subtypes of DD according to diagnostic criteria for TMDs. Methods: Four hundred thirty nine patients were diagnosed as one of the subtypes of DD. One hundred fourty nine subjects with no symptoms were set as control groups. All of them answered the HADS for Koreans. The cut-off score for anxiety and depression was set a score of 8. The chi-square test was performed to evaluate association between DD and anxiety/depression. Results: There was a significant difference in HADS-D between five groups (p<0.01). However, there was no significant difference in HADS-A. All the DD groups showed a significant difference in HADS-D compared with the control group except the DD without reduction without limited opening group. The DD without reduction with limited opening group showed the highest rates in HADS-D (40.4%). Conclusions: Based on the above results, it is necessary to consider the depression in treatment of the patients with DDs.

• Journal of Astronomy and Space Sciences
• /
• v.40 no.3
• /
• pp.113-122
• /
• 2023

Although the Relative Global Navigation Satellite System (GNSS) positioning technique provides high accuracy, it has several drawbacks. The scarcity of control points, the long baselines, and using of ultra-rabid and rabid products increased position errors. This study has designed a New MATLAB Program that helps users automatically select suitable IGS stations related to the baseline lengths and the azimuth between GNSS points and IGS stations. This study presented criteria for the length of the baselines used in Egypt and an advanced estimated accuracy before starting the project. The experimental test studies the performance of the position accuracy related to the relation between three factors: observation session, final, rabid, and ultrarabid products, and the baseline lengths. Ground control point mediates Egypt was selected as a test point. Nine surrounding IGS stations were selected as reference stations, and the coordinates of the tested point were calculated based on them. Baselines between the tested point and the IGS stations were classified regarding proposal criteria. The coordinates of the tested point were obtained in different observation sessions (0.5, 1, 2, 4, 5, 6, 7, 7.5 h). The results indicated that the lengths of the baseline in Egypt were classified short (less than 600 km), medium (600-1,200 km), and long (greater than 1,200 km) and required a minimum observation time of 4, 5, and 7 h to obtain accuracy 10, 19, 48 mm sequentially. The position accuracy was superior for the rapid and the final than the ultra-rapid products by 16%. A short baseline was at the best case; there was a performance in position accuracy with a 57% deduction in observation time compared with the long baseline.

• The Journal of Korean Society for School & Community Health Education
• /
• v.8 no.2
• /
• pp.79-95
• /
• 2007

A study was conducted in order to develope HACCP model in school lunch in Korea. Results: 1. Of 22 menus 4(18%) were non heating processes (#1), 2(9%) were food handling by using hands (#2), and 16(73%) were heating processes (#3). Of 279 menus 36(12.9%) belong to process #1, 8(2.9%) to process #2, and 235(84%) to process #3. 2. The critical control points for process #1 were contamination by hands of food handlers, and unsanitary food preparation habits of food handlers. Those for process #2 were improper heating temperature, contaminations by food handlers' hands, and unsanitary food handling habits, and cross contamination by unclean utensils and equipment. 3. Management criteria for the CCPs were conditions of food storage, refrigeration, freezing, food cooking temperature, personal hygiene, washing and sanitization of utensils and equipment. 4. Monitoring criteria for CCPs were observation, temperature checking, inspection of utensils and equipment, and practice of good personal hygiene. 5. Corrective actions were refusal of unsafe products, correction of improper temperature, proper cleaning and sanitization, and proper reheating time and temperature.