• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.5 no.4
• /
• pp.18-25
• /
• 1996

In this study, we have developed the stereolithography system that supports the development of a products. This paper presents the development of the stereolithography system. The system is composed of hardware, software and control part. The software converts a STL file to NC data and displays the monitoring figure in control part. The hardware part deals with structure of machine. The most important theme in this paper is LG-SLCAM software. This software can generate NC data and scanning condition data from a STL file semiautimatically. On the basis of three diensional shapes, it makes data for support structure from STL file. The effectiveness of using out stereolithography system is confirmed by processes of good development.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.66.2-66
• /
• 2001

Double-effect absorption chiller-heaters have been widely installed in large buildings and are also becoming popular in mid-sized commercial buildings. While much emphasis is Put on designing energy saving and efficient chiller-heaters, careful attention must also be given to the design of control systems for these devices. Currently, these devices are controlled by their own built-in controllers, such as relay based sequence controller or microprocessor based controller. But, because large buildings require multiple chiller-heaters, a centralized supervision and control system is necessary for the efficient monitoring, control, and operations management of these devices We have developed man-machine interface software that allows the implementation of such a system. This system will support increased reliability, more efficient building management operations, and reduced ...

• Journal of Biomedical Engineering Research
• /
• v.20 no.1
• /
• pp.81-90
• /
• 1999

This paper describes an EEG(electroencephalogram) software for two-channel cerebral function monitoring system to detect the cerebral ischemia. In the software, two-channel bipolar analog EEG signals are digitized and from the signals various EEG parameters are extracted and displayed on a monitor in real-time. Digitized EEG signal is transformed by FFT(Fast Fourier transform) and represented as CSA(compressed spectral array) and DSA(density spectral array). Additional 5 parameters, such as alpha ratio, percent delta, spectral edge frequency, total power, and difference in total power, are estimated using the FFT spectra. All of these are effectively merged in a monitor and displayed in real-time. Through animal experiments and clinical trials on men, the software is modified and enhanced. Since the software provides raw EEG, CSA, DSA, simultaneously with additional 5 parameters in a monitor, it is possible to observe patients multilaterally. For easy comparison of patient's status, reference patterns of CSA, DSA can be captured and displayed on top of the monitor. And user can mark events of surgical operation and patient's conditions on the software, this allow him jump to the points of events directly, when reviewing the recorded EEG file afterwards. Other functions, such as forward/backward jump, gain control, file management are equipped and these are operated by simple mouse click. Clinical tests in a university hospital show that the software responds accurately according to the conditions of patients and medical doctors can use the software easily.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.4 no.6
• /
• pp.570-578
• /
• 1999

This paper aims at developing remote control system to control and monitor distributed various devices t through Internet or information communication network. SNJV!P(Simple Network l\ilanagement Protocol) and R Rectifier system with SN:\IP are adoptL'Cl for applied system with network management protocoJ, respectiveJy. F For controJling and monitoring distributed devices in realtime, Java environment software is constructed. Also g general--purpose interface controller between network device and applied device is pro[XJsed. The ProPOSL'Cl c controller is also able to control various devices with communication network remotely.

• Journal of Positioning, Navigation, and Timing
• /
• v.10 no.2
• /
• pp.145-151
• /
• 2021

According to the Korea Augmentation Satellite System (KASS) system milestone, Site Acceptance Test (SAT) has three steps test until the end of the project. SAT#1 is the first time of SAT steps and verify the KASS Reference Station (KRS) and Sub System (S/S) for the monitoring and controllable. After the equipment and software were installed at the Mission Control Center (MCC) with Central Monitoring and Control Simulator (CMS) for the SAT#1, the 1:1 test was progressed when the KRS and S/S are ready to test. SAT#1 has a 10 steps test case and it was progressed each KRS sites. The test was finished throughout the real-time monitoring and the data collection including the data analysis all of the 7 KRS sites. Finally SAT#1 was completed on December 2020 with successfully.

• Proceedings of the IEEK Conference
• /
• 2003.07d
• /
• pp.1589-1592
• /
• 2003

Existing system management software solutions show limitations in time and space, as well as problems such as uncertain error messages, and also difficulty providing swift assistance or real time emergency support. Therefore, a wireless remote control system has been designed and implemented in this thesis, which is capable of managing and monitoring remote systems using mobile communication devices (Mobile Phone, PDA, Smart Phone, Webpad) for instantaneous control. The implemented real time wireless remote control system provides remote server management functions, error or event message (unctions, log record functions, authentication function via mobile devices.

• Proceedings of the KIEE Conference
• /
• 2003.11b
• /
• pp.251-254
• /
• 2003

In this paper have embodied a TCP/IP based small embedded web server and proposed the technical method for monitoring the real-time system states and remote controlling system using HTTP about manipulator joint angle. This also uses TCP/IP, which is the general protocol. and it is made of software, not of the TCP/IP stack with hardware chip. Then we attach the simulating results about the manipulator's input/output via web browser.

• International journal of advanced smart convergence
• /
• v.8 no.3
• /
• pp.69-77
• /
• 2019

Today, most of elevators have an emergency call facility for emergency situations. However, if the network installed in the elevator is also out of power, it cannot be used for the elevator remote monitoring and management. So, we develop an integrated and unified emergency call system, which can transmit not only telephone call but also data signals using PSTN(Public Switched Telephone Network) in order to remote monitoring and management of elevators, even though a power outage occurs. The proposed integrated emergency call system to process multiple data such as voice and operational information is a multi-channel board system which is composed of an emergency phone signal processing module and an operational information processing module in the control box of elevator. In addition, the RMS(remote management server) systems based on the Web consist of a dial-up server and a remote monitoring server where manages the elevator's operating information, status records, and operational faults received via the proposed integrated and unified emergency call system in real time. So even if there's a catastrophic emergency, the proposed RMS systems shall ensure and maintain the safety of passengers inside the elevator. Also, remote control of the elevator by this system should be more efficient and secure. In near future, all elevator emergency call system need to support multifunctional capabilities to transmit operational data as well as phone calls for the safety of passengers. In addition, for safer elevators, it is necessary to improve them more efficiently by combining them with high-tech technologies such as the Internet of Things and artificial intelligence.

• Proceedings of the KIEE Conference
• /
• 1999.07b
• /
• pp.671-673
• /
• 1999

In order to cope with the occurrence of abnormal operation, rotatory condition monitoring system for guide roller of finishing train in wire rolling has been developed. In this study, proximity sensor and its holding devices that could overcome severe in-situ measurement conditions was designed and MMI software using C++ was programmed. Performance of the developed system turned out to be good enough as results of in-line test for POSCO #3 wire rolling mill. It is expected to contribute to prevent the cobble and the grade-down of products caused by the abnornormal operation of guide rollers.

• Journal of the Korea Society of Computer and Information
• /
• v.21 no.10
• /
• pp.125-133
• /
• 2016

In this paper, we propose a real-time fault monitoring and dual system design of the countdown time-generating system, which is the main component of the mission control system. The countdown time-generating system produces a countdown signal that is distributed to mission control system devices. The stability of the countdown signal is essential for the main launch-related devices because they perform reserved functions based on the countdown time information received from the countdown time-generating system. Therefore, a reliable and fault-tolerant design is required for the countdown time-generating system. To ensure system reliability, component devices should be redundant and faults should be monitored in real time to manage the device changeover from Active mode to Standby mode upon fault detection. In addition, designing different methods for mode changeover based on fault classification is necessary for appropriate changeover. This study presents a real-time fault monitoring and changeover system, which is based on the dual system design of countdown time-generating devices, as well as experiment on real-time fault monitoring and changeover based on fault inputs.