• Smart Structures and Systems
• /
• v.14 no.4
• /
• pp.617-641
• /
• 2014

The energy constraint is still a common issue for the practical application of wireless sensors, since they are usually powered by batteries which limit their lifetime. In this paper, a practical compound energy efficiency strategy is proposed and realized in the implementation of a real time wireless sensor platform. The platform is intended for wireless structural monitoring applications and consists of three parts, wireless sensing unit, base station and data acquisition and configuration software running in a computer within the Matlab environment. The high energy efficiency of the wireless sensor platform is achieved by a proposed adaptive radio transmission power control algorithm, and some straightforward methods, including adopting low power ICs and high efficient power management circuits, low duty cycle radio polling and switching off radio between two adjacent data packets' transmission. The adaptive transmission power control algorithm is based on the statistical average of the path loss estimations using a moving average filter. The algorithm is implemented in the wireless node and relies on the received signal strength feedback piggybacked in the ACK packet from the base station node to estimate the path loss. Therefore, it does not need any control packet overheads. Several experiments are carried out to investigate the link quality of radio channels, validate and evaluate the proposed adaptive transmission power control algorithm, including static and dynamic experiments.

• Journal of Ecology and Environment
• /
• v.41 no.4
• /
• pp.114-119
• /
• 2017

This study tried to analyze error range and resolution of drone images using a rotary wing by comparing them with field measurement results and to analyze stands patterns in actual vegetation map preparation by comparing drone images with aerial images provided by National Geographic Information Institute of Korea. A total of 11 ground control points (GCPs) were selected in the area, and coordinates of the points were identified. In the analysis of aerial images taken by a drone, error per pixel was analyzed to be 0.284 cm. Also, digital elevation model (DEM), digital surface model (DSM), and orthomosaic image were abstracted. When drone images were comparatively analyzed with coordinates of ground control points (GCPs), root mean square error (RMSE) was analyzed as 2.36, 1.37, and 5.15 m in the direction of X, Y, and Z. Because of this error, there were some differences in locations between images edited after field measurement and images edited without field measurement. Also, drone images taken in the stream and the forest and 51 and 25 cm resolution aerial images provided by the National Geographic Information Institute of Korea were compared to identify stands patterns. To have a standard to classify polygons according to each aerial image, image analysis software (eCognition) was used. As a result, it was analyzed that drone images made more precise polygons than 51 and 25 cm resolution images provided by the National Geographic Information Institute of Korea. Therefore, if we utilize drones appropriately according to characteristics of subject, we can have advantages in vegetation change survey and general monitoring survey as it can acquire detailed information and can take images continuously.

• Journal of Astronomy and Space Sciences
• /
• v.23 no.2
• /
• pp.143-152
• /
• 2006

An automatic observation system has been constructed at Chungbuk National University for the purpose of monitoring the bright and long period variable stars effectively. We improved the control part of 40cm telescope of the LX200 and developed n observing software ObsTool II so that the telescope, CCD camera and dome can be controlled in one software. ObsTool II is a COM (Common Object Module) based software, which can be easily reprogrammed in case that a new telescope or CCD camera is installed. Because this system has an additional function in which the telescope can switch the variable, comparison, and check stars respectively as like a photoelectric observation, we can observe the variable star even if the CCD view field does not contain the comparison star with the variable star. In order to check the system stability a W UMa type variable V523 Cas and a magnetic cataclysmic variable TT Ari have been observed with the constructed system and the results have been discussed in context with the possibility of a further application of our automatical observation system.

• The Journal of Engineering Geology
• /
• v.20 no.3
• /
• pp.339-348
• /
• 2010

As part of preparing for future earthquakes near three LNG receiving terminals located in coastal regions of Korea, acceleration monitoring systems were installed at four free field sites and on a pile foundation beneath a storage tank in a receiving terminal. Several equipments and accessories were devised to successfully install and operate the monitoring system at LNG receiving terminals. Synthetic earthquake-alarming software systems designed for decisionmaking, based on peak ground acceleration computed using the measured data, were developed for rapid response during earthquakes, not only in each local terminal area but also in the central control division. In addition, a framework software linking nationwide data on peak ground accelerations was included in the integrated earthquake alarming system in the central division, for various future applications. The earthquake alarming systems developed in this research for LNG receiving terminals, based on acceleration monitoring, represent a useful framework for industrial facilities located in coastal regions, where geotechnical conditions may show marked spatial variations.

• Journal of Korea Multimedia Society
• /
• v.13 no.8
• /
• pp.1163-1170
• /
• 2010

In this paper, in order to develop a remote progress management system through the Internet, we show a design method to make easy maintenance by developing the system with both the JAVA language and GoF Design Patterns. For the system implementation, we added the RS232C and RS422/RS485 communication modules to PLC(Programmable Logic Controller) in the control box which provide the real time status data of machines. Also we set up the RS232C to Ethernet converter based on wireless environment to communicate the PLC control data. We use JAVA Swing components to implement the multi-tier architecture system supported the GUI of the Applet and Frame at the same time so that the manager grasps the progress of work easily at the remote machines through the Internet. The key objective of the multi-tier architecture is to share resources among clients, this proposed system can help to develop the software to control the remote machine, and also it has the advantage that developer who wants to make a similar software can make easy to add new function reusing the existing codes.

• Journal of KIISE
• /
• v.43 no.11
• /
• pp.1223-1232
• /
• 2016

A virtual network technology can provide a network reflecting the requirements of various services. The virtual network can distribute resources of the physical network to each virtual slice. An efficient resource distribution technique is needed to reflect the requirements of various services. Existing bandwidth distribution techniques can only control downlink traffic without taking traffic conditions on the network into account. Downlink and uplink share the same resources in a wireless network. The existing bandwidth distribution techniques assumed that all stations generate saturated traffic. Therefore, the existing bandwidth distribution technique cannot make traffic isolation in a virtual wireless network. In this paper, we proposed a traffic-based bandwidth control techniques to solve these problems. We applied Software-Defined Networking(SDN) to the virtual wireless network, monitored the traffic at each station, and searched for stations that generated unsaturated traffic. We also controlled both uplink and downlink traffics dynamically based on monitoring information. Our system can be implemented with legasy 802.11 clients and SDN-enabled APs. After the actual test bed configuration, it was compared to existing techniques. As a result, the distribution performance of the proposed technique was improved by 14% in maximum.

• Journal of KIISE:Computing Practices and Letters
• /
• v.5 no.6
• /
• pp.727-737
• /
• 1999

프로세스 중심 소프트웨어 개발 환경(PSEE : Process-centered Software Engineering Environment)은 소프트웨어 개발자를 위한 여러가지 정보의 제공과 타스크의 수행, 소프트웨어 개발 도구의 수행 및 제어, 필수적인 규칙이나 업무의 수행등과 같은 다양한 행위를 제공하는 프로세스 모형의 수행을 통하여 소프트웨어 개발 행위를 지원한다. SEED(Software Engineering Environment for Development)는 효율적인 소프트웨어 개발과 프로세스 모형의 수행을 제어하기 위해 ETRI에서 개발된 PSEE이다.본 논문에서는 SEED에서 프로세스 모형을 설계하기 위해 사용되는 SimFlex 프로세스 프로그래밍 언어와, 수행지원시스템인 SEED Engine의 구현에 대하여 기술한다. SimFlex는 간단한 언어 구조를 가진 프로세스 프로그래밍 언어이며, 적절한 적합화를 통하여 다른 PSEE에서 사용될 수 있다. SimFlex 컴파일러는 SimFlex에 의해 기술된 프로세스 모형을 분석하고, 모형의 오류를 검사하며, SEED Engine에 의해 참조되는 중간 프로세스 모형을 생성한다. 중간 프로세스 모형을 사용하여 SEED Engine은 외부 모니터링 도구와 연관하여 사용자를 위한 유용한 정보뿐만 아니라 SimFlex에 의해 기술된 프로세스 모형의 자동적인 수행을 제공한다. SimFlex 언어와 수행지원 시스템의 지원을 통하여 소프트웨어 프로세스를 모형화하는데 드는 비용과 시간을 줄일 수 있으며, 편리하게 프로젝트를 관리하여 양질의 소프트웨어 생산물을 도출할 수 있다. Abstract Process-centered Software Engineering Environments(PSEEs) support software development activities through the enaction of process models, providing a variety of activities such as supply of various information for software developers, automation of routine tasks, invocation and control of software development tools, and enforcement of mandatory rules and practices. The SEED(Software Engineering Environment for Development) system is a PSEE which was developed for effective software process development and controlling the enactment of process models by ETRI.In this paper, we describe the implementation of the SimFlex process programming language used to design process models in SEED, and its runtime support system called by SEED Engine. SimFlex is a software process programming language to describe process models with simple language constructs, and it could be embedded into other PSEEs through appropriate customization. The SimFlex compiler analyzes process models described by SimFlex, check errors in the models, and produce intermediate process models referenced by the SEED Engine. Using the intermediate process models, the SEED Engine provides automatic enactment of the process models described by SimFlex as well as useful information for agents linked to the external monitoring tool. With the help of the SimFlex language and its runtime support system, we can reduce cost and time in modeling software processes and perform convenient project management, producing well-qualified software products.

• Journal of KIISE:Information Networking
• /
• v.32 no.2
• /
• pp.180-189
• /
• 2005

This paper describes a transmission power control method for power saving in 802.11b wireless LANs. We have first explored how much effects reducing transmission power has on communication performance. Then we propose a power control algorithm, whose approach is similar to that of TCP congestion control, determining an appropriate transmission power level by monitoring the retransmission rate. We have implemented an utility software on a Linux-based system and made several experiments to validate the proposed method. The results show that it is possible to save energy consumption by controlling transmission power without sacrificing communication performance.

• International Journal of High-Rise Buildings
• /
• v.1 no.1
• /
• pp.37-51
• /
• 2012

New generation of tall and complex buildings systems are now introduced that are reflective of the latest development in materials, design, sustainability, construction, and IT technologies. While the complexity in design is being overcome by the availability and advances in structural analysis tools and readily advanced software, the design of these buildings are still reliant on minimum code requirements that yet to be validated in full scale. The involvement of the author in the design and construction planning of Burj Khalifa since its inception until its completion prompted the author to conceptually develop an extensive survey and real-time structural health monitoring program to validate all the fundamental assumptions mad for the design and construction planning of the tower. The Burj Khalifa Project is the tallest structure ever built by man; the tower is 828 meters tall and comprises of 162 floors above grade and 3 basement levels. Early integration of aerodynamic shaping and wind engineering played a major role in the architectural massing and design of this multi-use tower, where mitigating and taming the dynamic wind effects was one of the most important design criteria established at the onset of the project design. Understanding the structural and foundation system behaviors of the tower are the key fundamental drivers for the development and execution of a state-of-the-art survey and structural health monitoring (SHM) programs. Therefore, the focus of this paper is to discuss the execution of the survey and real-time structural health monitoring programs to confirm the structural behavioral response of the tower during construction stage and during its service life; the monitoring programs included 1) monitoring the tower's foundation system, 2) monitoring the foundation settlement, 3) measuring the strains of the tower vertical elements, 4) measuring the wall and column vertical shortening due to elastic, shrinkage and creep effects, 5) measuring the lateral displacement of the tower under its own gravity loads (including asymmetrical effects) resulting from immediate elastic and long term creep effects, 6) measuring the building lateral movements and dynamic characteristic in real time during construction, 7) measuring the building displacements, accelerations, dynamic characteristics, and structural behavior in real time under building permanent conditions, 8) and monitoring the Pinnacle dynamic behavior and fatigue characteristics. This extensive SHM program has resulted in extensive insight into the structural response of the tower, allowed control the construction process, allowed for the evaluation of the structural response in effective and immediate manner and it allowed for immediate correlation between the measured and the predicted behavior. The survey and SHM programs developed for Burj Khalifa will with no doubt pioneer the use of new survey techniques and the execution of new SHM program concepts as part of the fundamental design of building structures. Moreover, this survey and SHM programs will be benchmarked as a model for the development of future generation of SHM programs for all critical and essential facilities, however, but with much improved devices and technologies, which are now being considered by the author for another tall and complex building development, that is presently under construction.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.5
• /
• pp.1643-1653
• /
• 2014

This paper presents the design and implementation of a wind-solar hybrid power system for LED street lighting and an isolated power system. The proposed system consists of photovoltaic modules, a wind generator, a storage system (battery), LED lighting, and the controller, which can manage the power and system operation. This controller has the functions of maximum power point tracking (MPPT) for the wind and solar power, effective charging/discharging for the storage system, LED dimming control for saving energy, and remote data logging for monitoring the performance and maintenance. The proposed system was analyzed in regard to the operation status of the hybrid input power and the battery voltage using a PSIM simulation. In addition, the characteristics of the proposed system's output were analyzed through experimental verification. A prototype was also developed which uses 300[W] of wind power, 200[W] of solar power, 60[W] LED lighting, and a 24[V]/80[Ah] battery. The control system principles and design scheme of the hardware and software are presented.