• 대한기계학회논문집A
• /
• 제31권10호
• /
• pp.1031-1038
• /
• 2007

A study on the development of control loading system for a pilot command in the helicopter flight training device is performed. The key issue of the device is how to provide closely the real feeling of the stick forces to the trainer during the flight training. Focusing on this proviso and considering the suitable approach than the complexity of the hydraulic system, we adopt the AC servo motor system although its inherent disadvantages such as the torque ripple and the stick-slip friction effect at a low control force. However, we overcome these detrimental effects by introducing the appropriate control device and the robust structural design of the actuating system, thereby the feasibility and applicability to the system can be obtained by showing good performance, meeting the required specification.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1360-1364
• /
• 2004

This paper propose an extended model for role-permission assignment based on locations called "Enhanced Role-Based Access Control (ERBAC03)". The proposed model is built upon the well-known RBAC model. Assigning permissions to role is considered too complex activity to accomplish directly. Instead we advocate breaking down this process into a number of steps. The concept of jobs and tasks is specifically introduced to facilitate role-permission assignment into a series of smaller steps. This model is suitable for any large organization that has many branches. Each branch consists of many users who work in difference roles. An administration tool has been developed to assist administrators with the administration of separation of duty requirements. It demonstrates how the specification of static requirements can be done based on "conflicting entities" paradigm. Static separation of duty requirements must be enforced in the administration environment. Finally, we illustrate how the ERBAC03 prototype is used to administer the separation of duty requirements.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1867-1870
• /
• 2003

The analysis and simulation are the method to study the behavior, response, and specification of the driver device. This paper proposes brushless DC drive which using the vector control technique. The encoder is used detect the rotor position and decode to Three-phase step signal. The step signal is modulated with triangle signal and change to the pulse width modulation (PWM) signal. The PWM signal is used for control the input power of the motor based on the vector control technique. The experimental results of the driver circuit and motor response performed under the following condition: as the motor was started, change the load torque, and vary the supply voltage. The experimental performs with a dynamometer and the test results are compared to the simulation method is the same result.

• International Journal of Quality Innovation
• /
• 제4권1호
• /
• pp.191-204
• /
• 2003

The target costing technique, mathematically discussed by Sauers, only uses the $C_p index along with Taguchi loss function and $\bar{X}$-P control charts to setup goal control limits. The new specification limits derived from Taguchi loss function is linked through the $C_p value to $\bar{X}$-P control charts to obtain goal control limits. Studies have shown that the point estimator of the $C_p index, $C_p, could vary from time to time due to the sampling error. The suggested approach is to use confidence intervals, especially the lower confidence intervals, to replace the point estimator. Therefore, an improvement on target costing technique is presented by applying the lower confidence interval of the $C_p index and using both Taguchi and Spiring's loss functions together with $\bar{X}$-P charts to make this technique more robust in practice. An example is also provided to illustrate how the improved target costing technique works.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2007년도 추계학술대회 논문집
• /
• pp.31-33
• /
• 2007

In this paper, a simple digital control scheme for the single/parallel module buck converters is proposed using a digital state feedback control method. The discrete state feedback controller structure for the robust tracking control is derived by using the error state. The proposed control system can precisely achieve the interleaved current sharing and the output regulation, and can achieve the systematical controller design for a given converter specification using the pole placement technique. For a design example, the single module buck converter is simulated using the MATLAB Simulink software and two 100W parallel module buck converters with a TMS320F2812 DSP is implemented.

• Management Science and Financial Engineering
• /
• 제3권2호
• /
• pp.71-92
• /
• 1997

Developing FMS controllers has been a difficult problem largely because of the variety of the system configuration. The purpose of this paper is to develop a method of building an FMS controller. The controller consists of control module and execution module. A hierarchically layered structure of these modules is proposed. The control module generates abstract-level execution requested by identifying a set of activities that can be executed without creating any irregular state. The execution module transmits the requests to physical device controllers and reports back the completion of the requests to the control module. Both of these two modules use Petri Net-based models. In this paper, a controllable Petri Net model is automatically synthesized from declarative specifications provided by a user. An execution Petri Net model for the execution module is designed to ensure the consistency between the control module and the real target system. The controller operates in MMS on TCP/IP and UNIX environment.

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2006년도 춘계 종합학술대회 논문집
• /
• pp.405-408
• /
• 2006

광대역망에서 다양한 트래픽의 종류에 따른 셀 손실율과 셀 지연율의 요구사항을 만족시킬 수 있는 제어시스템의 설계는 매우 중요한 요소이다. 본 논문에서는 트래픽의 각 클래스 타입에 따라 셀 카운터와 윈도우 카운터를 이용한 우선순위 제어 기법을 제안하였다. 제안한 기법에서는 요구된 서비스의 질을 만족시키기 위해 셀 카운터와 윈도우 카운터의 비교에 의해 얻어진 셀 손실과 지연요소를 획득하여 우선순위 제어를 수행하였다. 그리고 컴퓨터 시뮬레이션을 통하여 성능을 평가하였다.

• 제어로봇시스템학회논문지
• /
• 제15권10호
• /
• pp.988-993
• /
• 2009

In this paper, we deal with a tracking gain-up controller design problem to control effectively the shake of tracking actuator after a track seek. A minimum tracking gain-up open-loop gain can be calculated by estimating the shake of tracking actuator and a desired transient specification is considered to diminish effectively the shake of actuator. A tracking gain-up controller is designed by considering a robust $H_{\infty}$ control problem with a regional stability constraint. The proposed tracking gain-up controller design method is applied to the track-following system of a DVD recording device and is evaluated through the experimental results.

• 대한전자공학회논문지TE
• /
• 제39권4호
• /
• pp.431-436
• /
• 2002

본 연구에서는 워크플로우 환경에서 정적 및 동적 의무 분리 요구 사항의 명세에 대한 과업 역할 기반 접근제어 모델과 상충하는 엔티티 관리 패러다임의 통합을 통하여 기업 환경에서 접근제어 시행을 위한 개선된 접근제어 모델을 구현한다. 본 논문에서 구현한 확장된 과업 역할기반 접근제어 모델은 워크플로우 지향 과업에 대하여 상충하는 엔티티들을 다룰 수 있고 기업의 특성에 따라서 기업 세션의 분류를 통하여 기업 환경에서 과업에 정교한 의무 분리 정책을 지원할 수 있다.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제50권12호
• /
• pp.609-614
• /
• 2001

This paper presents a multi output converter system that controls, simultaneously and independently, the separate Buck converter and Boost converter with the different specification by one DSP digital controller. As two separate converters are regulated by only one DSP, it is possible to achieve the simple digital control circuit for regulating multi output DC-DC converter. By setting the software switch state, PI and Fuzzy controller can be applied as a controller for each converter without any change of hardware. Also, it is included the control characteristics comparison between PI and Fuzzy controller. The control characteristics of each PWM DC-DC converter is validated by experimental results.