• 제어로봇시스템학회논문지
• /
• 제14권10호
• /
• pp.1081-1087
• /
• 2008

This paper describes limitations and solutions of the existing processor-monitoring concept for a military supersonics aircraft Flight Control Computer (FLCC) equipped with modern architecture processor to perform the system integration test. Safecritical FLCC integration test, which requires automatic test for thousands of test cases and real-time input/output test condition generation, depends on the processor-monitoring device called Processor Interface (PI). The PI, which relies upon on the FLCC processor's external address and data-bus data, has some limitations due to multi-fetching capability of the modern sophisticated military processors, like C6000's VLIW (Very-Long Instruction Word) architecture and PowerPC's Superscalar architecture. Several techniques for limitations were developed and proper monitoring approach was presented for modem processor-adopted FLCC system integration test.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제11권1호
• /
• pp.1-5
• /
• 2011

To enter next process control, numerous approaches, including run-to-run (R2R) process control and fault detection and classification (FDC) have been suggested in semiconductor manufacturing industry as a facilitation of advanced process control. This paper introduces a novel type of optical plasma process monitoring system, called plasma eyes chromatic system (PECSTM) and presents its potential for the purpose of fault detection. Qualitatively comparison of optically acquired signal levels vs. process parameter modifications are successfully demonstrated, and we expect that PECSTM signal can be a useful indication of onset of process change in real-time for advanced process control (APC).

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.1216-1223
• /
• 2008

Displacement control of earth retaining wall is recognized as the most important item for insuring the stability of ground in urban deep excavation site near by major structure such as subway etc. The field monitoring system is classified by two types as manual system and automatic system. The application case of latter type of field monitoring is increased because real time measurement is possible in automatic system and that is correspondent with the recent constructional trend. Though the automatic monitoring system is more useful and advanced than manual monitoring system, accuracy of the system is not verified sufficiently. It was examined that the reliance of automatic monitoring system in this paper through the comparison of monitoring result obtained three urban excavation site in which the each type of monitoring system was executed concurrently. Result of the examination is that the two types of monitoring system is generally alike in view of monitoring result, so the engineering reliance of automatic system was confirmed in case site. This task was researched in restricted case site, it is expected more precise analysis from security of more data monitored and progressive study.

• Journal of Advanced Marine Engineering and Technology
• /
• 제31권5호
• /
• pp.592-598
• /
• 2007

The fuel charge is getting higher in navigation cost. Therefore, shipowners try to find the method for reducing oil consumption. ESS(Energy Saving System) is one of he method. ESS is the system consisted with two inverters, ESS control unit and monitoring system. Two inverters control two main sea water cooling pumps. In the ESS control Unit, the control algorithm finds optimized point to decrease a power consumption of main sea water cooling pumps. Monitoring system observes ESS not to work improperly. ESS is experimented in the laboratory with real condition and analyzed in every view. After experiment, the result of the experiment shows that the control algorithm works correctly and safely. ESS has a plan to be operated in the ship soon. In that case, additional devices are needed to connect ESS with cooling system of the vessel. So the development of addition device is needed and being studied.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2006년도 하계종합학술대회
• /
• pp.909-910
• /
• 2006

In this paper, the transfer function to the vehicle is derived from using system identification algorithm in connection with the driving vehicle. We design the adaptive cruise controller using the derived transfer function, and make it possible to monitoring and control the vehicle in real time using embedded system and technology of Internet.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.1259-1267
• /
• 2008

One of the most important item for insuring the stability of ground in urban deep excavation site near by major structure such as subway is displacement control of earth retaining wall. The field monitoring system is classified by two types as manual system and automatic system. The application case of latter type of field monitoring is increased because real time measurement is possible in automatic system and that is correspondent with the recent constructional trend. Though the automatic monitoring system is more useful and advanced than manual monitoring system, accuracy of the system is not verified sufficiently. It was examined that the reliance of automatic monitoring system in this paper through the comparison of monitoring result obtained one of deep urban excavation site in which the each type of monitoring system was executed concurrently. Result of the examination is that the two types of monitoring system is generally alike in view of monitoring result, so the engineering reliance of automatic system was confirmed in case site. This study was researched in restricted one case site, so it is expected more precise analysis from security of more data monitored and progressive study.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1205-1210
• /
• 2004

The 4-20mA analog signal used in the various industrial fields to interface sensor in distributed process control has been replaced with relatively simple digital networks, called "fieldbus, and recently by Ethernet. Significant advances in Internet and computer technology have made it possible to develop an Internet based control, monitoring, and operation scheduling system for heating, ventilation and air-conditioning (HVAC) systems. The seamless integration of data networks with control networks allows access to any control point from anywhere. Field compatible field devices become so-called "smart" devices, capable of executing simple control, diagnostic and maintenance functions and providing bidirectional serial communication to higher level controller. The most important HVAC of BAS has received nationwide attention because of higher portion of more than 40% in building sector energy use and limited resources. This paper presents the Internet-based monitoring and control architecture and development of LonWorks control modules for AHU (air handling units) of HVAC in viewpoint of configuring BAS network. This article addresses issues in architecture section, electronics, embedded processors and software, and internet technologies.

• 한국산학기술학회논문지
• /
• 제11권9호
• /
• pp.3161-3167
• /
• 2010

제어를 위한 기구부의 위치 정보는 BLDC 모터의 홀센서를 이용하여 정확한 위치 및 속도제어가 가능하도록 알고리즘을 구현하였으며, 실제 기구부의 방위각과 고도각에 대한 제어 정밀도를 측정한 결과 최대 $2.02^{\circ}$, $1.01^{\circ}$. 오차범위 $1.86^{\circ}$이내로 비교적 정확하였다. 태양광 발전 모니터링 시스템은 LCU를 중심으로 한 통합 모니터링 제어 시스템으로 모든 장비들은 1:N 방식으로 다중 동시접속이 가능하고, 원격지에서 시스템의 제어 및 현재 상태에 대한 실시간 감시가 가능하도록 개발하였다.

• 제어로봇시스템학회논문지
• /
• 제10권9호
• /
• pp.847-854
• /
• 2004

In this paper, It is studied to control and to monitor the remote system state using HTTP(Hyper Text Transfer Protocol) object communication. The remote control system is controlled by using a web browser or a application program. This system is organized by three different part depending on functionality-server part, client part, controller part. The java technology is used to composite the server part and the client part and C language is used for a controller. The server part is waiting for the request of client part and then the request is reached, the server part saves client data to the database and send a command set to the client part. The administrator can control the remote system just using a web browser. Remote part is worked by timer that is activated per 1 second. It gets the measurement data of the controller part, and then send the request to the server part and get a command set in the command repository of server part using the client ID. After interpreting the command set, the client part transfers the command set to the controller part. Controller part can be activated by the client part. If send command is transmitted by the client part, it sends sensor monitoring data to the client part and command set is transmitted then setting up the value of the controlled system.

• 대한안전경영과학회지
• /
• 제5권2호
• /
• pp.87-98
• /
• 2003

With the development of CNC(Computer Numerical Control) and communication technology, the connotation and functions of Distributed Numerical Control have been greatly enlarged. In this study, we develop and implement a Distributed Numerical Control system that has real time and multi-tasking operation capability for the machining cell with various NC(Numerical Control) and CNC machines. With the consideration of economy, generalization and extension, this system is interfaced with Shop Floor Control System, Machine Control System and Tool Preparation System using advanced networking method. In the implementation phase, we use the ORACLE DBMS (Database Management System) as the DBMS and Microsoft Visual C++ as the programming tools.