• 한국경영과학회지
• /
• 제36권1호
• /
• pp.39-55
• /
• 2011

Process monitoring has been emphasized for the monitoring of complex system such as chemical processing industries to achieve the efficiency enhancement, quality management, safety improvement. Recently, ICA (Independent Component Analysis) based MSPC (Multivariate Statistical Process Control) was widely used in process monitoring approaches. Moreover, DICA (Dynamic ICA) has been introduced to consider the system dynamics. However, the existing approaches show the limitation that their performances are strongly dependent on the statistical distributions of control variables. To improve the limitation, we propose a novel approach for process monitoring by integrating DICA and LOF (Local Outlier Factor). In this paper, we aim to improve the fault detection rate with the proposed method. LOF detects local outliers by using density of surrounding space so that its performance is regardless of data distribution. Therefore, the proposed method not only can consider the system dynamics but can also assure robust performance regardless of the statistical distributions of control variables. Comparison experiments were conducted on the widely used benchmark dataset, Tennessee Eastman process (TE process), and showed the improved performance than existing approaches.

• 전자공학회논문지SC
• /
• 제49권2호
• /
• pp.1-9
• /
• 2012

본 논문에서는 이원화된 필드버스 기반의 선박 엔진용 분산 제어시스템을 설계 및 구현한다. 구현된 시스템은 엔진의 상태 값을 감시하기 위해서 CAN과 MODBUS 프로토콜을 혼합 형태로 이용하여 서로 다른 영역의 통신 구조로 구성한다. 첫 번째 층은 CAN프로토콜을 이용하여 엔진의 상태 값을 공유하게 된다. 두 번째 층은 MODBUS를 이용하여 엔진룸에서 기관실의 AMS로 모니터링 데이터 전송을 위한 통신을 지원한다. 테스트 베드 환경을 구축하여 구현된 시스템을 선급기술규칙의 요구사항에 의거하여 테스트 및 성능 검증하였다.

• Smart Structures and Systems
• /
• 제11권5호
• /
• pp.511-531
• /
• 2013

Recent advances in low-cost remote monitoring systems have made it possible and practical to perform structural health monitoring (SHM) on a large scale. However, it is difficult for a single remote monitoring system to cover a wide range of SHM applications due to the amount of specialization required. For the remote monitoring system to be flexible, sustainable, and robust, this article introduces a new cost-effective, advanced remote monitoring and inspection system named DuraMote that can serve as a next generation supervisory control and data acquisition (SCADA) system for civil infrastructure systems. To evaluate the performance of DuraMote, we conduct experiments at two representative counterpart sites: a bridge and water pipelines. The objectives of this article are to improve upon the existing SCADA by integrating the remote monitoring system (i.e., DuraMote), to describe a prototype SCADA for civil engineering structures, and to validate its effectiveness with long-term field deployment results.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.1884-1887
• /
• 1997

The increasing concern over radiation exposure in the nuclear industry has fostered agrressive efforts to reduce the levels of radiation exposure. One area of the effot to reduce the radiation exposure is the development of a remote radiation monitoring system. Remote radiation monitoring can serve many benificaial functions reduce exposure to radiation by plant personnel, impruve the quality of the data that is collected and recognize the radiation environment easily. Radiation mapping system gives a good information that represents radiation level distribution. The system we have developed consists of a data acquistion parts, mobile robot and remote control parts. Data acquisition parts consist of radiation detection module and vision acquistion module which collect radiation data, visiion data and distance information. In remote control parts, the acquision data are processed and displayed. We have constructed radiation mapping image by overlaying the vision and radiation data. The radiation mapping techniques for displaying the results of the survey in an easily comprehendable form will facilitate a better understanding of the radiation environment in the facility. This system can reduce workers radiation exposure and aid to help work plan, so it has significant benifits in cost and safety.

• 한국컴퓨터산업학회논문지
• /
• 제8권1호
• /
• pp.41-48
• /
• 2007

본 논문은 Java 기술을 이용하여 TCP/IP 상에서 웹 기반의 원격 감시제어시스템 개발에 대한 예를 제시하였다. Java의 Socket 클래스를 이용한 클라이언트/서버 소켓 프로그램을 구현하였고 이를 레고 블록으로 만든 온실 모델에 적용하여 웹 기반 온실 감시제어시스템을 구축하였다. 구축된 웹 기반 온실 감시제어시스템은 온실의 정보를 클라이언트 프로그램에 잘 전달하여 표시하며 웹 상에서 동작하는 Java Applet 클라이언트에서 보내는 제어 신호를 서버를 통해 온실 모델에 잘 전달하여 동작시키는 것을 볼 수 있었다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -2
• /
• pp.1169-1172
• /
• 2002

This paper presents the development of an expert system for monitoring and control of an oil production facility. The objectives of developing an expert system for the oil production facility are to monitor the Important processing parameters in different sections of the facilities and to control battery operations in real time. By providing consistent, fast, and reliable decision support to operators, the expert system can be used for automated monitoring and control of a petroleum production facility located south of Regina in Saskatchewan, Canada. The system was implemented in Visual Basic 6.0.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.347_348
• /
• 2009

In this paper, we described the integrated monitoring system for low-voltage panel boards. This system consists of three parts, a panel board controller, an integrated monitoring unit and a remote PC. The panel board controller which was made of CT/PT unit, control unit and power supply is able to transmit variable parameter for monitoring and diagnosis of low voltage branch circuits. Also, the integrated monitoring unit was collected monitoring data from panel boards and displayed on the touch panel.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2003년도 춘계종합학술대회
• /
• pp.301-304
• /
• 2003

본 논문은 웹 브라우저 만으로 원격지에 위치한 설비의 모니터링과 제어를 할 수 있고, 서로 다른 시스템간의 호환성과 확장성을 지원할 수 있는 lava 플랫폼을 기반으로 응용 계층인 HTTP 프로토콜의 URL통신을 이용한 인터넷 원격제어 시스템 구축 방법을 제안하였다. 제안한 인터넷 원격제어시스템을 실험하기 위하여 서버 PC와 RS-232 통신방식으로 연결된 $\mu$-Processor를 통한 직류전동기의 속도 및 온도를 모니터링하고 제어하는 실험을 하였다.

• 대한임베디드공학회논문지
• /
• 제13권5호
• /
• pp.225-234
• /
• 2018

Control flow errors are caused by the vulnerability of memory and result in system failure. Signature-based control flow monitoring is a representative method for alleviating the problem. The method commonly consists of two routines; one routine is signature update and the other is signature verification. However, in the existing signature-based control flow monitoring, monitoring target application is tightly combined with the monitoring code, and the operation of monitoring in a single thread is the basic model. This makes the signature-based monitoring method difficult to expect performance improvement that can be taken in multi-thread and multi-core environments. In this paper, we propose a new signature-based control flow monitoring model that separates signature update and signature verification in thread level. The signature update is combined with application thread and signature verification runs on a separate monitor thread. In the proposed model, the application thread and the monitor thread are separated from each other, so that we can expect a performance improvement that can be taken in a multi-core and multi-thread environment.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제51권7호
• /
• pp.279-285
• /
• 2002

This Paper deals with the economical equipment control which is used by internet network system at the industrial workplace. If the control devices can be accessed by internet, we can have the developed possibility of work conditions. in this paper, we presented the advanced digital timer which has a communication function to control and observe panel to realize control solution based on internet to be easily applicable at workplace with low cost, and we used RS-485 serial communication module to have parallel expansibility and safety. And, this system was experimented and designed for easy system management and status check from remote station through internet. As the result for experiment, the circuit configuration would be more simplified than the existing, and it is expected that multi connection control and monitoring can be simply implemented with low cost equipment at industrial workplace.