• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10a
• /
• pp.906-911
• /
• 1992

We deals with stationary layout control system of AGV. It is a intelligent contorl system to be wholly charged control PC a layout information and guided command and to be controlled a vehicle driving, steening, safety of natural functions of AGV. Fieldbus concentrator of stationary layout control system serves control command from control PC and status information of AGV. Telegram software monitors transmitted command and status information through IR (Infrared) modem. Epecially it is possible to easily network to use not an exclusive controller of AGV but

• Journal of the Korea Safety Management & Science
• /
• v.8 no.6
• /
• pp.109-118
• /
• 2006

This paper proposes service layout strategy considering service characteristics by the use of benchmarking production system such as layout by P-Q chart, improvement tool, automated system, Toyota production system and lean production system. This paper represents operation methodology of statistical process control using control chart for service performance outcomes.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.26 no.1
• /
• pp.7-15
• /
• 2020

Purpose: Emergency room(ER) is the first place to enter a hospital where patients who might have been infected with contagious disease. Therefore, ER should be designed with infection control in mind. Researchers examined hospital ER layouts to identify layout design that support infection control. Methods: This study analyzed the hospital ER layout of Korean and other hospitals abroad. Researchers focused on route of incoming patients who potentially have infectious disease. Crossing of this route with other routes such as for imaging and testing should be avoided for infection control. Results: There were certain hospital ERs with better control of infection related incidents. ER floor plan layout is analyzed about allocation of key functions with movement routes for each role such as patients and medical staff in mind. To identify layout strategies for ER functions researchers simplified the routes in ER into diagrams. Layout options show that bypassing infection suspected routes over other routes is possible. Implications: Hospitals can control infection easier when they adopt strategic ER layout identified in this study.

• Journal of Mechanical Science and Technology
• /
• v.14 no.10
• /
• pp.1089-1103
• /
• 2000

A Problem of relevant interest to some industries is that of obtaining optimum two-dimensional layout. To solve this provlem, one is given a number of rectangular sheets and an order for a specified number of each of certain types of two-dimensional regular and irregular shapes. The aim is to cut the the shapes out of the sheets in such a way as to minimize the amount of waste produced. A DCS (Distributed Control System) is an integrated system which applies the decentralization concept to a control system handling both sequential and analog control. A DCS performs many operations such as data gathering, data processing, data storing and monitoring the operatin conditions for the operator. IN this paper, we propose a genetic algorithm based on rotation parameters from which the best pattern of layout is found as well as a layout method for better performance time. A DCS for the plate cutting process system, which is performed by a virtual system, is also identified.

• 연구논문집
• /
• s.22
• /
• pp.27-38
• /
• 1992

We deals with stationary layout control system of AGV. It is a intelligent control system to he wholly charged control PC a layout information and guided command and to be controlled a vehicle driving, steering, safety of natural functions of AGV. Fieldbus concentrator of stationary layout control system serves control command from control PC and status information of AGV. Telegram software monitors transmitted command and status information through IR(JnfraRed) modem. Especially it is possible to easily network to use not an exclusive controller of AGV but personal computer(PC) when communicate and interface a different kind of controller.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1994.04a
• /
• pp.103-111
• /
• 1994

An interactive and iterative design method based on the constraint satisfaction problem (CSP) technique was developed to generate an ergonomically sound layout of a control panel. This control panel layout method attempts to incorporate a variety of relevant ergonomic principles and design constraints, and generate an optimal or, at least, a "satisfactory" solution through iterative interactions with the designer. The existing panel design and layout methods are mostly based on the optimization of single objective function formulated to reflect and trade off all ergonomic design objectives which are largely different in their nature. In fact, the problem of seeking an ergonomically sound panel design should be viewed as a multiple objective optimization problem. Furthermore, most of the design objectives should be understood as constraints rather than objectives to be optimized. Hence, a constraint satisfaction approach is proposed in this study as a framework for the panel designer to search through the design decision space effectively and make various design decisions iteratively. In order to apply the constraint satisfaction approach to the panel design procedure, the ergonomic principles such as frequency-of-use, importance, functional grouping, and sequence-of-use are formalized as CSP terms. With this formalization, a prototype system was implemented and applied to panel layout problems. The results clearly showed the effectiveness of the proposed approach since it permits designers to consider and iteratively evaluate various design constraints and ergonomic principles, and, therefore, aids the panel designer to come up with an ergonomically sound control panel layout.

• Proceedings of the ESK Conference
• /
• 1995.10a
• /
• pp.172-181
• /
• 1995

A control panel layout system was developed to generate an ergrnomically sound panel design. A constraint satisfaction concept was introduced as a framework of incorporating diverse ergonomic design guidelines into the panel layout. An efficient search algorithm which can find a constraint satisfaction solution within a reasonable time was developed based on preprocess and look ahead procedures with the backjumping technique. The proto- type panel layaout system was developed on a SPARC workstation. The constraint satisfaction algorithm was programmed in C language with Motif as a GUI tool under the X-windows environment. The effectiveness of the prototype paned layout system was examined by a case study.

• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.5
• /
• pp.376-382
• /
• 2000

A problem of relevant interest to some industries is that of the optimum two-dimensional layout. In this problem, one is given a number of rectangular sheets and an order for a specified number of each of certain types of two-dimensional regular and irregular shapes. The aim is to cut the shapes out of the sheets in such a way as to minimize the amount of waste produced. In this paper, we propose a genetic algorithms using rotation parameters by which the best pattern of layout is found.

• Journal of the Ergonomics Society of Korea
• /
• v.30 no.1
• /
• pp.161-168
• /
• 2011

Objective: The aim of this study is to review the ISO(the International Organization for Standardization) standards recommendations on a human error tolerant control room design. Background: ISO TC(Technical Committee) 159 published a variety of international standards on design of mental and physical work, design of displays and controls, and workstation layout design. A proper edition of these standards can be a good resource for a human error tolerant control center design guidelines. Method: Recommendations of ISO TC 159 standards were grouped into arrangement of control suite, layout of control room, layout and dimensions of workstations, design of displays and controls, environmental design, alarm, automation, management system design, procedure and training. Results: It was found that some standards on the design of supervisory control and data acquisition(SCADA), alarm, automation, layout, workload management, and environment can be used for human error prevention guidelines in the control center design. Conclusion: ISO TC 159 standards were not sufficient to cover all the ergonomics area of control center design. Application: Designers can have technical aids from these ISO standards to improve ergonomic performance of their control center.

• Journal of Korean Institute of Industrial Engineers
• /
• v.20 no.4
• /
• pp.85-97
• /
• 1994

An interactive and iterative control panel layout method based on the constraint satisfaction problem (CSP) technique was developed to generate an ergonomically sound panel design. This control panel layout method attempts to incorporate a variety of relevant ergonomic principles and design constraints, and generate an optimal or, at least, a "satisfactory" solution through an efficient search algorithm. The problem of seeking an ergonomically sound panel design should be viewed as a multi-criteria design problem and most of the design objectives should be understood as constraints. Hence, a CSP technique was employed in this study for dealing with the multi-constraints layout problem. The efficient search algorithm using "preprocess" and "look_ahead" procedures was developed to handle vast amount of computation. In order to apply the CSP technique to the panel layout procedure, the ergonomic principles such as spatial compatibility, frequency-of-use, importance, functional grouping, and sequence-of-use were formalized as CSP terms. The effectiveness of the proposed panel layout method was evaluated by example problems and the results clearly showed that the generated layouts properly considered various ergonomic design principles.