• Radiation Oncology Journal
• /
• v.19 no.3
• /
• pp.205-210
• /
• 2001

Purpose : This study tried to evaluate the effectiveness of combined treatment using radiation therapy and concurrent cisplatin as a radiosensitizer in the management of locally advanced head and neck cancer. Materials and methods : From January 1995 to August 1998, 29 evaluable patients with locally advanced head & neck cancels (AJCC stage $II\~IV$) were received curative radiation therapy $(total\;70\~75.6\;Gy/35\~42\;fractions,\;1.8\~2\;Gy/fraction)$ and concurrent cisplatin chemotherapy ($100\;mg/m^2$, D1, D22, D43). The neck dissections were peformed for residual lymphadenopathy. Follow-up ranged from 5 to 55 months (median 24 months). Results : Twenty-one $(72.4\%)$ patients achieved clinical complete responses. The partial response and minimal response rates were $17.2\%\;and\;10.4\%$, respectively. Locoregional failure rate was $27.6\%$, and included 6 patients with local failures, 4 patients with regional failures, and 2 patients with combined local and regional failures. Four of 29 patients $(13.8\%)$ developed distant metastasis. The disease free survival rate at 3 years was $60\%$. Nasopharyngeal primary tumors or complete responders showed significantly higher disease free survival rate. The grade 3 mucositis and nausea/vomiting was noted in $34.5\%$, respectively. Major prolongation of radiation therapy duration was inevitable in three patients. Twenty-one patients $(72.4\%)$ completed 3 courses of cisplatin and 5 patients received 2 courses of cisplatin. Three patients received only one course of cisplatin due to nephrotoxicity and neurotoxicity, and then changed to 5-FU regimen. Conclusions : Concurrent cisplatin-radiation therapy in locally advanced head and neck cancer showed high response rate, reasonable locoregional control, and survival rate. As expected, acute toxicities were increased, but compliance to treatment was acceptable. Assessment of the effect of the combination in this setting requires further accrual and follow-up.

• Journal of Korean Society of Forest Science
• /
• v.90 no.6
• /
• pp.699-706
• /
• 2001

This study was conducted to evaluate the effectiveness of basic oxygen furnace (BOF) slag as soil conditioner in a nursery and two natural forests. The BOF slag was applied at rates of 0, 4, 8, and 12 t/ha for seedbed nursery of three tree species-Pinus densiflora, Larix leptolepis and Amorpha fruticosa; and 0, 10, 20, and 40 t/ha for Pinus densiflora natural forests located at two sites. In case of the nursery study, the significant increase in soil pH and contents of Ca, Mg, $SiO_2$, Fe and Mn was noticed after six months of the BOF slag application. Dry weight of Pinus densiflora seedlings with BOF slag treatments was lower compared with that of control. There were no significant differences among treatments in dry weight of Larix leptolepis seedlings. Dry weight of Amorpha fruticosa seedlings, which are deciduous species and grow rapidly at seedling stage, increased significantly and T/R ratio decreased as BOF slag rate increased. The differences of effects of BOF slag application on the seedlings of tree species may be attributed to the differences of optimum pH range of the species. In Pinus densiflora natural forests, there were no significant differences in soil pH and contents of $SiO_2$, Fe and Mn among the treatments, but these values became higher as BOF slag rate increased. Contents of Ca in soil became significantly higher as BOF slag rate increased. There were no significant differences among treatments in net production of mature Pinus densiflora trees, but BOF slag rate of 10ton/ha showed the highest net production. Young Pinus densiflora trees at the plots of BOF slag rate of 10 t/ha showed significantly higher root collar diameter growth rate and twig net production than those of other treatments. It may be given as a conclusion that BOF slag application in nursery and forest soil increased soil pH and contents of Ca, $SiO_2$, Fe and Mn in soil and they showed the ability of BOF slag to be used as a soil conditioner in strongly acid soil.

• Management & Information Systems Review
• /
• v.38 no.2
• /
• pp.183-208
• /
• 2019

The purpose of this study is to examine the effects of the transformational leadership on helping behaviors and deviant behaviors of organizational members and to verify the control effect of value consistency and to suggest a process for effective business management and human resource management. For this purpose, questionnaires were distributed to employees working in office management, area marketing, and manufacturing industries in Seoul, Gyeonggi and Chungcheong provinces, and the final 334 copies were used for empirical analysis. Data were analyzed using SPSS 18.0, and reliability analysis, factor analysis for validity, correlation analysis, and regression analysis were conducted to verify the research hypothesis. The results of the empirical analysis based on the questionnaire based on the object are as follows. First, charisma of transformational leadership showed negative impact on helping behavior, and intellectual stimulation of transformational leadership and individual care showed positive influence on helping behavior. Second, charisma of transformational leadership showed negative influence on deviant behavior, whereas intellectual stimulation of transformational leadership and sub - constitutional factor of individual care did not show significant influence on deviant behavior. Third, as a result of confirming the moderating role of transformational leadership and helping behavior on the level of value consistency, it showed moderating effects on charisma and individual consideration of transformational leadership. Through this study, we proved the effectiveness of transformative leadership which increases the helping behaviors of the members and reduces the deviant behavior. Based on this, we proposed the necessity of developing managers' transformational leadership improvement program to enhance the sustainability of the organization. And we confirmed the partial influence relationship on the adjustment effect of value consistency. In addition, negative influence of charisma suggests a significant point in the management process design.

• Journal of Food Hygiene and Safety
• /
• v.34 no.3
• /
• pp.296-302
• /
• 2019

Ganjang-gejang (soy sauce-marinated crab) is a ready-to-eat (RTE) seafood and is also one of the most popular traditional dishes in Korea. It is generally prepared by washing raw blue crabs and then preserving them in soy sauce. Since this process does not involve cooking or any treatment with heat, it is difficult to control the microbiological quality of the final product. Thus, the objectives of this study were to compare the efficacies of various sanitizers in eliminating microorganisms on raw blue crab during the washing step and to evaluate the effectiveness of chitosan on the inhibition of microbial growth in the ganjang-gejang during storage. The raw blue crabs were submerged in chlorinated water (50 mg/L), peracetic acid (40 mg/L), acetic acid (5%) and lactic acid (5%) for 10 min at $25^{\circ}C$, respectively. The blue crabs treated with 5% acetic acid were marinated with soy sauce containing 0.5 and 1% of soluble chitosan, followed by storing them at 4 and $12^{\circ}C$ for up to 30 days. Results show that 5% acetic acid reduced the microbial populations on the blue crabs by 1.5 log CFU/g, which was significantly higher than those of other treatments. Based on these results, 5% acetic acid was selected for the washing step. The microbial populations of all ganjang-gejang samples significantly increased to about 8.0 CFU/g at $12^{\circ}C$ for 7 days. At $4^{\circ}C$, the microbial populations of the products containing 1% chitosan increased by about 2.9 CFU/g for 20 days, which were significantly lower than those (4.2-4.5 log CFU/g) of the products without and with 0.5% chitosan. Thus, these results suggest that 5% acetic acid washing of raw blue crabs and the addition of 1% chitosan in ganjang-gejang could improve the microbiological quality of the final products under refrigerated condition.

• Economic and Environmental Geology
• /
• v.54 no.2
• /
• pp.233-245
• /
• 2021

Many studies on the microstructures in rocks have been conducted using experimental methods with various equipment as well as natural rock studies to see the development of microstructures and understand their mechanisms. Grain boundary migration of mineral aggregates in rocks could cause grain growth or grain size changes during metamorphism or deformation as one of the main recrystallization mechanisms. This study suggests improved ways regarding the analog material experiments with reformed equipment to see sequential observations of these grain boundary migration. It can be more efficient than the existing techniques and carry out an appropriate microstructure analysis. This reformed equipment was implemented to enable optical manipulation by mounting polarizing plates capable of rotating operation on a stereoscopic microscope and a deformation rig capable of experimenting with analog materials. The equipment can automatically control the temperature and strain rate of the deformation rig by microcontrollers and programming and can take digital photomicrographs with constant time intervals during the experiment to observe any microstructure changes. The composite images synthesized using images by rotated polarizing plates enable us to see more accurate grain boundaries. As a rock analog material, norcamphor(C7H10O) was used, which has similar birefringence to quartz. Static grain growth and simple shear deformation experiments were performed using the norcamphor to verify the effectiveness of the equipment. The static grain growth experiments showed the characteristics of typical grain growth behavior. The number of grains decreases and the average grain size increases over time. These case experiments also showed a clear difference between the growth curves with three temperature conditions. The result of the simple shear deformation experiment under the medium temperature-low strain rate showed no significant change in the average grain size but presented the increased elongation of grain shapes in the direction of about 53° regarding the direction perpendicular to the shearing direction as the shear strain increases over time. These microstructures are interpreted as both the plastic deformation and the internal recovery process in grains are balanced by the deformation under the given experimental conditions. These experiments using the reformed equipment represent the ability to sequentially observe changing the microstructure during experiments as desired in the tests with the analog material during the entire process.

• Journal of the Society of Disaster Information
• /
• v.17 no.1
• /
• pp.10-24
• /
• 2021

Purpose: The purpose of this study is to determine the dangers of biodiesel and general diesel mixtures currently used as alternative fuels by equipment (tag method and penski Marten method) and to determine the difference between flash point and combustion point (closed, open) according to test methods. It is intended to be used as a reference material for identification and evaluation of firecausing substances by confirming the risk of mixtures by comparative analysis and measurement, and establishing a risk assessment method for chemical substances. Method: Flash point test method and result treatment were tested based on ASTM and KS M mode, which are tag sealing and pen schematense test methods used as flash point and combustion point test methods for crude oil and petroleum products. The manufacturer of the equipment used in this experiment was a test equipment that satisfies the test standards of KS M 2010 with equipment produced by TANAKA of Japan. The flash point and combustion point were measured, and the flash point according to the test method of biodiesel and general diesel mixture ( Closed, open), and the ignition point of a mixture of biodiesel and general diesel was compared and analyzed for ignition risk compared with conventional diesel. Results: Looking at the experimental results, first, as an analysis of the risk of flammability of the mixture, the flash point of a substance containing 70% biodiesel was found to be about 92℃ based on general diesel with a flash point of 64.5℃, and gasoline and biodiesel or When the biodiesel mixture was synthesized, it was confirmed that the flash point tends to decrease. In addition, the difference between the flash point and the combustion point was analyzed as about 20 ~ 30℃, and when a small amount of gasoline or methanol was mixed, the flash point was lowered, but it was confirmed that the combustion point was similar to that of the existing mixture. Conclusion: In this study, in order to secure the effectiveness of the details of the criteria for judging dangerous materials in the existing Dangerous Materials Safety Management Act, and to secure the reliability and reproducibility of the judgment of dangerous materials, we confirm the criteria for judging the risk of the mixture through an experimental study on flammable mixtures. It will be able to provide reference data for experimental criteria for flammable liquids that are regulated in the field. In addition, if this study accumulates know-how on experiment by test method, it is expected that it can be used as a basis for research on risk assessment and research on dangerous goods.

• Journal of the Society of Disaster Information
• /
• v.16 no.4
• /
• pp.701-711
• /
• 2020

Purpose: In this study, the risk of flammability of a liquid mixture was experimentally confirmed because the purpose of this study was to confirm the increase or decrease of the flammability risk in a mixture of two substances (combustible+combustible) and to present the risk of the mixture. Method: Flash point test method and result processing were tested based on KS M 2010-2008, a tag sealing test method used as a flash point test method for crude oil and petroleum products. The manufacturer of the equipment used in this experiment was Japan's TANAKA. The flash point was measured with a test equipment that satisfies the test standards of KS M 2010 with equipment produced by the company, and LP gas was used as the ignition source and water as the cooling water. In addition, when measuring the flash point, the temperature of the cooling water was tested using cooling water of about 2℃. Results: First of all, in the case of flammable + combustible mixtures, there was little change in flash point if the flash point difference between the two substances was not large, and if the flash point difference between the two substances was low, the flash point tended to increase as the number of substances with high flash point increased. However, in the case of toluene and methanol, the flash point of the mixture was lower than that of the material with a lower flash point. Also, in the case of a paint thinner, it was not easy to predict the flash point of the material because it was composed of a mixture, but as a result of experimental measurement, it was measured between -24℃ and 7℃. Conclusion: The results of this study are to determine the risk of mixtures through experimental studies on flammable mixtures for the purpose of securing the effectiveness of the details of the criteria for determining dangerous goods in the existing dangerous goods safety management method and securing the reliability and reproducibility of the determination of dangerous goods Criteria have been presented, and reference data on experimental criteria for flammable liquids that are regulated in firefighting sites can be provided. In addition, if this study accumulates know-how on differences in test methods, it is expected that it can be used as a basis for research on risk assessment of dangerous goods and as a basis for research on dangerous goods determination.

• 한국노년학
• /
• v.30 no.4
• /
• pp.1293-1309
• /
• 2010

This study is aimed to evaluate the effects of community-based prehabilitation program developed to prevent functional decline in the frail elderly and to provide a basis to practically operate this program in the public health care service. From March to August 2009, 110 frail elderly people were recruited among the registered participants of the home visit program in Korea to perform a prospective randomized community trial. We randomly assigned these people into two groups. One group (n=50) participated in the visiting prehabilitation program for 3 months focusing on improving their muscle strength of upper and lower limbs, walking ability, and balancing. The other group (n=60) underwent our visiting fall prevention program for control. To assess the effectiveness of prehabilitation program, physical functioning (PF) and short physical performance battery (SPPB) were measured for the primary outcomes and also some other indicators: exercise performance, nutritional status, emotional functioning, experience of admission, and events of fall. As a result, significant improvements of geriatric functional status were noticed among the participants. After 3 months, PF increased by 1.3 ± 3.8 points in prehabilitation group and decreased by 1.1 ± 5.4 points in controls (p=.020). SPPB improved by 2.4 ± 2.0 points in prehabilitation group and increased only 0.3 ± 1.5 points in controls (p<.001). Significant effects were also shown in their exercise performance tests and emotional status, the number of multiple falls, and the experience of functional decline after the fall (p .002-.038). Visiting prehabilitation program is safe and effective program for frail older adults. Thus, it is strongly recommended to universally adopt this program to prevent functional decline in the frail elderly.

• Maritime Security
• /
• v.7 no.1
• /
• pp.31-60
• /
• 2023

This study proposes a new convergence weapon system that combines the covert placement and detection abilities of a self-propelled mobile mine with the rapid tracking and attack abilities of supercavitating rocket torpedoes. This innovative system has been designed to counter North Korea's new underwater weapon, 'Haeil'. The concept behind this convergence weapon system is to maximize the strengths and minimize the weaknesses of each weapon type. Self-propelled mobile mines, typically placed discreetly on the seabed or in the water, are designed to explode when a vessel or submarine passes near them. They are generally used to defend or control specific areas, like traditional sea mines, and can effectively limit enemy movement and guide them in a desired direction. The advantage that self-propelled mines have over traditional sea mines is their ability to move independently, ensuring the survivability of the platform responsible for placing the sea mines. This allows the mines to be discreetly placed even deeper into enemy lines, significantly reducing the time and cost of mine placement while ensuring the safety of the deployed platforms. However, to cause substantial damage to a target, the mine needs to detonate when the target is very close - typically within a few yards. This makes the timing of the explosion crucial. On the other hand, supercavitating rocket torpedoes are capable of traveling at groundbreaking speeds, many times faster than conventional torpedoes. This rapid movement leaves little room for the target to evade, a significant advantage. However, this comes with notable drawbacks - short range, high noise levels, and guidance issues. The high noise levels and short range is a serious disadvantage that can expose the platform that launched the torpedo. This research proposes the use of a convergence weapon system that leverages the strengths of both weapons while compensating for their weaknesses. This strategy can overcome the limitations of traditional underwater kill-chains, offering swift and precise responses. By adapting the weapon acquisition criteria from the Defense force development Service Order, the effectiveness of the proposed system was independently analyzed and proven in terms of underwater defense sustainability, survivability, and cost-efficiency. Furthermore, the utility of this system was demonstrated through simulated scenarios, revealing its potential to play a critical role in future underwater kill-chain scenarios. However, realizing this system presents significant technical challenges and requires further research.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.40 no.2
• /
• pp.55-63
• /
• 2024

Purpose: This study aimed to assess the antimicrobial efficacy of an 810-nm infrared diode laser with indocyanine green (ICG) against Staphylococcus aureus on sandblasted, large grit, and acid-etched (SLA) titanium surfaces, comparing its effectiveness with alternative chemical decontamination modalities. Materials and Methods: Biofilms of S. aureus ATCC 25923 were cultured on SLA titanium disks for 48 hours. The biofilms were divided into five treatment groups: control, chlorhexidine gluconate (CHX), tetracycline (TC), ICG, and 810-nm infrared diode laser with ICG (ICG-PDT). After treatment, colony-forming units were quantified to assess surviving bacteria, and viability was confirmed through confocal laser-scanning microscope (CLSM) imaging. Results: All treated groups exhibited a statistically significant reduction in S. aureus (P < 0.05), with notable efficacy in the CHX, TC, and ICG-PDT groups (P < 0.01). While no statistical difference was observed between TC and CHX, the ICG-PDT group demonstrated superior bacterial reduction. CLSM images revealed a higher proportion of dead bacteria stained in red within the ICG-PDT groups. Conclusion: Within the limitations, ICG-PDT effectively reduced S. aureus biofilms on SLA titanium surfaces. Further investigations into alternative decontamination methods and the clinical impact of ICG-PDT on peri-implant diseases are warranted.