• 상하수도학회지
• /
• 제31권1호
• /
• pp.29-37
• /
• 2017

To estimate pollution sources in the watershed with various industries, the simulation of contamination route and distribution of 2-methyl-4,6-dinitriophenol(DNOC) were performed with a numerical model Hydro Geo Sphere. This study was performed calculations of the load using the measured concentration and simulated flow rate. And, the river was divided by the sampling sites at the mainstream, and the contribution rate at downstream sampling sites was calculated for each section. The results showed the concentration of the downstream sampling sites were decided by the concentration of upstream sites, and the contribution rates of the tributaries were calculated below 10%. The results also showed that the impact of the potential sources in Section 1(Geumho1 ~ Geumho2) and Section 5(Geumho5 ~ Geumho6) was larger than in the other area. In Section1 and Section5, It seemed to require detailed investigation.

• The Korean Journal of Ecology
• /
• 제18권4호
• /
• pp.451-462
• /
• 1995

A comparative study on the minimal areas and the community structures in pine IPinus densiflora) and oak (Quercus mongolica) frests was carried out. Basic tools used in the present study were species diversity and classical ayntaxonomy (Z.-M. School) of the phytocoenosis. Total 120 nest-quadrats in 40 stands situated at the syngeographical region of the Lindero-Quercion mongolicae were investigated. Each stand was classified on the basis of species combination, and species abundance was computed with net contribution degree (NCD). Composition ratio of plant-from and rate of actual species diversity (ASD) to syntaxa were computed for better interpretation of the minimal areas. Four syntaxa were structured: Saso-Quercetum mongolicae, Viola albida-Quercus mongolica community, Carex hummilis-Pinus densiflora community and Juniperus rigida-Pinus densiflora community. Their minimal areas were determined as 305, 196, 169, and 81 ㎡, respectively. Aconsistent regularity between species composition ratio and community structure in the multi-layered plant community was hardly found. The minimal areas increased linearly with increasing rate of ASD, and a phytocoenosis developed by diverse arboreta in the understory and shrub-layer should be investigated with larger sampling sizes.

• 한국태양에너지학회 논문집
• /
• 제22권1호
• /
• pp.1-8
• /
• 2002

With the possibility of hot water being able to be used as a heating source in a liquid desiccant system, an experimental apparatus for regeneration of the liquid desiccant was set up and series of experiments were conducted in a climate-controlled chamber. This study was performed to ascertain the influences of experimental factors on regenerating performance and to suggest the optimal combination of factors affecting regeneration rate. Furthermore. in order to figure out the contribution ratio of the factors on regenerating performance, a multi-way factorial design among the design of experiments was adopted. According to experimental results, the most influential factor on regenerating performance was temperature of the liquid desiccant and its contribution ratio was about 79.4%. In addition. the optimal operating combination was as follows; $60^{\circ}C$ of solution temperature, $14\ell$/min of solution flow rate, and 190m3/h of air volume.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 춘계학술대회 논문집
• /
• pp.361-366
• /
• 2012

In this paper, we propose the efficient technique that reduces the number of spot-welds and increases the structural rigidity by using the topology optimization technique. Eigen value analysis is used to evaluate the rigidity of the optimized model. As a first step, the topology optimization is performed to find optimal spot-weld distributions. In this study, the design objective is to maximize the weighted frequencies. The volume fractions of the weld components are used as design constraints, and also the densities of each element in the individual design space are used as design variables. And then, to consider the possibility of spot-weld failure, the contribution rate analysis was performed by using the orthogonal array method of DOE. The spot-welds in the rear panel part are reinforced according to estimation results of the contribution rate analysis. Finally, we obtained optimized spot-weld layout model which has the reduced number of spot-welds and the improved dynamic stiffness.

• 한국염색가공학회지
• /
• 제25권4호
• /
• pp.241-246
• /
• 2013

The color properties of a white or nearly colorless fabric are represented by whiteness index (WI) or yellowness index (YI). These two indexes relate to a white fabric's color quality. The purpose of this study was to identify the properties of WI and YI on the CIELAB through the simulations of estimation data for a systemization of color quality control. The results indicated that the relationship between WI and YI was a negative correlation, however the coefficients of correlation function between WI and YI were depended on hue. There were two hue transition points of the rate of changes in WI and YI. These hue transition points were the reference points to divide the hue contribution to WI and YI. These points were not the point of h=0 and h=180 and asymmetric. In addition, where the colors were same distance from the white point on the CIELAB, the rate of changes in WI and YI by ${\Delta}$Ew were depending on hue. Specifically, when WI decreased, YI of reddish and yellowish tinted colors decreased more than bluish tinted colors.

• 한국병원경영학회지
• /
• 제15권4호
• /
• pp.1-26
• /
• 2010

We achieved both industrialization and democratization during the shortest period in the world. We also achieved good performance in national health insurance: universal coverage, solidarity in financing, equitable access of health care. However, national health insurance system has faced the problem of sustainability: various expenditure and financing problems. The problem of sustainablity has two facets of economic sustainability and fiscal sustainability. Economic sustainability refers to growth in health spending as a proportion of gross domestic product(GDP). Rapid increasing rate of health spending exceeds the growth rate of domestic product. Growth in health spending is more likely to threaten other areas of economic activity. Concern on fiscal sustainability relates to revenue and expenditure on health care. Health care financing face demographic and technical obstacles. Democratic obstacle is aging problem. Technical obstacle is collection of contribution. Expenditure of health care has various problems in benefit structure and efficiency of health care system. In this article, I suggest several policy reforms to enhance sustainability: generating additional revenue from value added tax, changing method of levying contribution, increasing efficiency of health care system by introducing the competition principle. restructuring of benefit scheme of health insurance. contracting with health care institutions to provide health care services.

• 한국태양에너지학회 논문집
• /
• 제31권1호
• /
• pp.100-106
• /
• 2011

This study proposes a $CO_2$ emission reduction method through correlation analysis of a sample building. First, energy saving factors of heating, cooling, lighting were determined for the correlation analysis and $CO_2$ emission contribution rate of the design parameters have been analyzed. Then optimal combination of each design parameter has been drawn. Heat transfer coefficient of walls and windows, air permeability, windows area ratio, and shading devices were selected as applicable energy saving factors of the sample building. Also computer simulation was conducted using experimental design by Orthogonal Arrays of the statistical method. And the contribution rate was estimated by Analysis of Variance-ANOVA. As a result, the $CO_2$ emission in heating was reduced to 51.9%; in cooling to 16.8%; and in lighting to 2% compared to the existing building. The majority of the reduction was presented by heating energy.

• 수산경영론집
• /
• 제33권2호
• /
• pp.75-98
• /
• 2002

As a contribution to developing fishery stock assessment, optimum sustainable yield and its international standards such as MSY, MEY, and dynamic MEY for six recommended fisheries are developed using bio-economic models. For selecting the appropriate model, five models - Schaefer, Schnute, Walters and Hilborn, Fox, and CY&P models are tested in effort and catch data of six species. Surprisingly all the models except the CY&P model failed to satisfy statistical standards such as goodness-of-fitness and reliability. Generally, the CY&P model holds good fitness and statistically significant level for all of six fisheries. However, the CY&P model for squid, where the intrinsic growth rate is high, could not explain MSY, MEY, and dynamic MEY appropriately. This study makes a contribution to develop the modified model for the intrinsic growth rate of 1. The reformulated model represents the results reasonably even though the estimated equation has not good fitness. Although most of the CY&P models appear to have good fits and validated results for some cases, these models also seem to be quite sensitive to parameters which means a more stable model should be developed and data should carefully be handled. In particular biological and technical interactions such as multispecies, predator prey relationship, age structure and mortality should be taken into account. In addition, economic factors and fishing efforts such as price, cost, technical change and a reasonable function of fishing input should simultaneously be considered.

• 한국입자에어로졸학회지
• /
• 제10권1호
• /
• pp.9-17
• /
• 2014

Several studies have been carried out on the source contribution of the particulate Polycyclic Aromatic Hydrocarbons (PAHs) over Seoul by using the Chemical Mass Balance Model (CMB)(Lee and Kim, 2007; Kim et al., 2013). To confirm the validity of the modeling results, the modified model employing a photochemical loss rate along with varying residence times and the standard model that considers no loss were compared. It was found that by considering the photochemical loss rate, a better performance was obtained as compared to those obtained from the standard model in the CMB calculation. The modified model estimated higher contributions from coke oven, transportation, and biomass burning by 4 to 8%. However, the order of the relative importance of major sources was not changed, coke oven followed by transportation and biomass burning. Thus, it was concluded that the standard CMB model results are reliable for identifying the relative importance of major sources.

• 한국환경과학회지
• /
• 제25권5호
• /
• pp.715-726
• /
• 2016

This study investigates the characteristics of metallic and ionic elements concentration, concentration according to transport path, and factor analysis in $PM_{10}$ at Guducsan in Busan in the springtime of 2015. $PM_{10}$ concentration in Guducsan and Gwaebeopdong were $59.5{\pm}9.04{\mu}g/m^3$ and $87.5{\pm}20.2{\mu}g/m^3$, respectively. Contribution rate of water-soluble ions and secondary ion in $PM_{10}$ concentration in Guducsan were 37.0% and 27.8% respectively. [$NO_3{^-}/SO{_4}^{2-}$] ratio and contribution rate of sea salt of $PM_{10}$ in Guducsan and Gwaebeopdong were 0.91 and 1.12, 7.0% and 5.3%, respectively. The results of the backward trajectory analysis indicates that $PM_{10}$ concentration, total inorganic water-soluble ions and total secondary ions were high when the air parcels moved from Sandong region in China than non-Sandong and northen China to Busan area. The results of the factor analysis at Guducsan indicates that factor 1 was anthropogenic source effects such as automobile emissions and industrial combustion processes, factor 2 was marine sources such as sea salts from sea, and factor 3 was soil component sources.