• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.1229-1230
• /
• 2006

This study is for implementation of PC based Motor fault diagnosis system. By using harmonics and current signals of the motor, this system diagnoses the motor condition by accumulated harmonic contribution rate. In this proposed system that was composed of 5 parts. A sensor, connection box, evaluation board, device server, and main computer are those. There were two types of sensor, one was harmonic sensor the other was current sensors. The signal was acquired by sensor, and transferred to evaluation board. Second one is connection box. Because the output type of sensor and input type of evaluation board is different, connection box was necessary. Third one was evaluation board. The signal from the sensor was converted to digital signal in evaluation board. And this signal was transferred to device server. Fourth one was device server. Device server transferred the data from evaluation board to main computer. And the last one was other parts controlled by main computer in main computer, there were communication and diagnosis algorithms. The result was derived by main computer. In the result, there were 12 categories and 5 levels of motor conditions. The proposed system had some advantages comparing with stand alone type commercial motor fault diagnosis system. The first, by using remote access it was easier to get the conditions of motor. The second, there was no need to handle the sensors when users measured the motor signals. By this property, no one was necessary at motor location site. The third, this system was less restricted by times and places than commercial stand alone type diagnosis system. Therefore users can operate this system only using the main computer. Once the sensors are installed at the motor, users doesn't need to move to check up the condition of motors. Moreover, if there is ethernet hub, many motors can be not only diagnosed at once but also decreased its cost.

• Journal of the Korean Ceramic Society
• /
• v.40 no.1
• /
• pp.93-97
• /
• 2003

Using alumina-glass infiltrated material which has been in the spotlight of biomaterials including dental material, appropriate composition of glass infiltrated material mainly depends on the thermal expansion coefficient. To obtain proper compositional glass of suitable thermal expansion coefficient effiiently. a Taguchi analysis was conducted. The influence of alkali oxide and alkali earths oxide, which affect mostly the thermal expansion coefficient of glass infiltrated material, was infiltrated material, the effect having influenced on the thermal expansion coefficient of glass was presented in this order (Na$_2$O≫K$_2$O ≫MgO≒CaO). The effect of Na$_2$O was about eight times as great as the effects of MgO, CaO and $K_2$O was about four times. Among the interaction affects of each variables the interaction affects of $K_2$O-CaO showed most significantly and thermal expansion property of specified composition was predicted by calculating contribution rate on each level of variables and interaction affects.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.22 no.51
• /
• pp.175-187
• /
• 1999

The notion of productivity has been extended from the quantitative change of input factors to the efficiency change meaning efficient use of resources, and to the technical change meaning the qualitative improvement of input resources. In this way, the technical change is termed as total factor productivity in the individual businesses or the manufacturing industries. They should efficiently respond to the variations of economic environment and at the same time, have to make the efforts to improve productivity by increasing managerial efficiency and rasing the level of technology change for the continuous growth. Considering the growing importance of productivity, this study closely examines the factors influctuation on the productivity, fluctuation using total factor productivity in korean manufacturing industries. For the objective this study investigates the methods of measurement about total factor productivity, establishes the hypotheses based on the preceding research and finding. The results are obtained through the examination on the outcoms of regression analysis and related data. The results can be summarized as follows, First, in the progress of korean industrialization, the qualitative growth does not depend on the total factor productivity of the technical advance, and does not lead to the industry expansion. That is, the contribution of total factor productivity turns out to be relatively low. Second, it is necessary for the manufacturing industry to improve the level of technology and to emphasize the innovation of business, since the capital investment does not completely become fixed in the growth rate of productivity. Finally, continuous R&D investment should be made to increase total factor productivity. Namely, the regulation of industrial structure with an intensive technical development is essential and should be based on scientific and technical knowledge.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.2 no.2
• /
• pp.70-77
• /
• 1999

The disturbance of oil-water interface confined between tandem fences caused by a sequence of traveling vortices below the interface is investigated. The traveling vortices are assumed to be those detached from the tip of the fore fence. The potential flow is assumed and the density interface is replaced as a sheet of vortex. The shape of the interface is predicted by tracing a finite number of marker particles placed at the interface. The velocity of the marker particles is determined by the Biot-Savart integral along the vortex sheet plus the contribution from the traveling point vortices. The rate of change of vortex-sheet strength is predicted by using an evolution equation for vorticity. The calculated results obtained for various conditions demonstrate that the large amplitude of interfacial wave following the moving vortek can be generated by the vortices.

• Journal of the Korean Applied Science and Technology
• /
• v.6 no.1
• /
• pp.31-40
• /
• 1989

Five novel amphoteric surfactants of N-acyloxyethylcarboxybetaine series were synthesized via Schotten-Baumman reaction between five acid chlorides containing 10, 12, 14, 16 and 18 carbon atoms in their N-alkyl groups and dimethylaminoethanol to give the intermediate products, 2-dimethylaminoethylalkanoates(2). Quaternization of these products(2) was permitted to from 2-(acyloxyethyldimethylammonic)- acetates(3), whose structures were identified by elemental analysis, IR spectrophotometry and $^1Hnmr$ spectrometry. The yield of the final products was shown in the range of 77-80% based on the intermediate products. The surface tension of the aqueous solution of (3) was measured, and the critical micelle concentrations (cmc) were shown in the range of $2.1\;{\times}\;10^{-3}\;-\;3.3\;{\times}\;10^{-4}mol/l$, and the surface tension at cmc was 28-36 dyne/cm. Cmc was lowered gradually by the increment of the length of N-alkyl ester containing group. The isoelectric point was shown in the range of 4.44-5.20. It showed a tendency to lean toward the acidic site and its range was broadened as increase of the hydrophobic group length. A linear relationship between log cmc and the number of carbon atoms(N) in the hydrophobic alkyl chain was shown in the relative equation of log cmc=-1.75-0.1N, and the contribution rate of N on the standard free energy change in micellization, ${\bigtriangleup}({\bigtriangleup}G^{\circ}m)/{\bigtriangleup}N$, was calculated as -0.23 RT.

• Journal of Fisheries and Marine Sciences Education
• /
• v.19 no.2
• /
• pp.180-196
• /
• 2007

This study aims at analyzing the potential of leports-fishing for improving fishing household income. Leports-fishing is a composite concept which is combined with those of leisure, sports and fishing. Korean on-shore resources have also a composite characteristic. The properties of the east, west and south coastal waters are quite different in geography, biology and ecology. There is a array of leports-fishing development potentials of utilizing their characteristics. At present, angling forms a main activity of leports-fishing, but coastal seas would be an emerging space for the public. In order for them to be a ground of fun, enjoyment and festivals, it would be necessary to supply a wide range of activities and facilities including angling, scuba diving, fish barbecue, ecological experience, fishing experience, cruise, and so forth. As seen in the survey results, the participants have strong desire for fun and enjoyment through leports-fishing activities. The proportion of people participating in one or two times a year amounts to 40 percent. Most coastal places visited are close to medium/large cities and two-days leports-fishing/tourism accounts for some 77 percent. However, it turned out that conflicts between leports-fishing participants and fishermen are not serious. The results of expenditure function estimation appear that the elasticity of per capita income is very high with 1.2660 and that there are negative relationships between leports-fishing expenditure and transportation/food/lodging costs. Assuming the annual national economic growth rate of 4 percent, it is anticipated that Korean leports-fishing population will increase to 3.18 million in 2010 and 4.07 million in 2015. Korean leports-fishing market potential in 2015, which is calculated based on per capita expenditure on leports-fishing, appears to amount to 1,400 billion won~1,600 billion won. The contribution of such market potential to the fishing households is expected to be 62.3~74.2 percent(934.5 billion won~111.3 billion won).

• Journal of Digital Convergence
• /
• v.14 no.9
• /
• pp.89-97
• /
• 2016

Intellectual property rights play a key role in employment creation and income generation plays an important role, especially in the creative economy. Many companies are ultimately increasing efforts to boost the company's financial performance, such as maximizing profits by building a strong brand assets amid committed to brand management in this paradigm. Reasonable evaluation and commercialization of technology transactions, financial assistance, investment decisions, trademark brand value for the reactivation (revitalizing) for the purposes of M & A, litigation, brand strategy will be said to be very important. In spite of the importance, the awareness of the property and the capabilities to assess are hardly sufficient. Thus, this study, targeting companies with valid trademarks for value assessment, conducted case analysis by cost method and income approach; the analysis presented the result from 2.05 million by the cost method to 2.7 million by the income approach applied to a variable discount rate and adjustment contribution. However, now that the implication was drawn from a single company, further studies covering case study and application plan according to scale and type of diverse company groups should be continued.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.47 no.3
• /
• pp.36-41
• /
• 2010

An advanced form of Multistage Feature-based Classification Model(AMFCM), called AMFCM, is proposed in this paper. AMFCM like MFCM does not use the concatenated form of available feature vectors extracted from original data to classify each data, but uses only groups related to each feature vector to classify separately. The prpposed AMFCM improves the contribution rate used in MFCM and proposes a confusion table for each local classifier using a specific feature vector group. The confusion table for each local classifier contains accuracy information of each local classifier on each class of data. The proposed AMFCM is applied to the problem of music genre classification on a set of music data. The results demonstrate that the proposed AMFCM outperforms MFCM by 8% - 15% on average in terms of classification accuracy depending on the grouping algorithms used for local classifiers and the number of clusters.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.48 no.1
• /
• pp.149-156
• /
• 2011

The purpose of this paper is the brief introduction of touchless fingerprint recognition and the assessment of interoperability between touchless and legacy rolled fingerprints for the wide use of touchless fingerprint recognition system. In order to assess the interoperability, the contrast and resolution of the touchless images are optimized firstly. And we perform the matching by using conventional minutiae-based matcher. Experimental results are promising that our touchless fingerprints have enough matching performance with equal error rate 7.9%. We can expect that our paper will make a significant contribution to the wide use of touchless fingerprint recognition and the increment of interoperability in the system integration between touchless-based and touch-based fingerprint systems.

• Journal of the Korean Institute of Gas
• /
• v.11 no.4
• /
• pp.17-22
• /
• 2007

The NOx emission characteristics with oxygen enrichment in non-premixed counterflow flames were investigated numerically. To consider systematically the situation of inevitable $N_2$ contamination by air infiltration in the process of pure-oxygen combustion, the volume ratio of $O_2$ in an oxidizer was changed from 21% to 100%. As a result the NO emission index $(EI_{NO})$ has the highest value under condition of 75% oxygen enrichment. This result can be explained by the change of $N_2$ destruction rate with oxygen enrichment rather than flame temperature, flame thickness and residence time. In particular, it was found that the reaction of N+NO=$N_2+O$ has the largest contribution on NOx production in oxygen-enrichment flames.