• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.210-212
• /
• 1996

Random drift rate (i.e., random drift in angle rate) of a gyro represents the major error source of inertial navigation systems that are required to operate over long time intervals. It is uncorrectable and leads to an increase in the error with the passage of time. In this paper a technique is presented for analyzing random process from experimental data and the results are presented. The problem of estimating the a priori statistics of a random process is considered using time averages of experimental data. Time averages are calculated and used in the optimal data-processing techniques to determine the statistics of the random process. Therefore the contribution each component to the gyro drift process can be quantitatively measured by its statistics. The above techniques will be applied to actual gyro drift rate data with satisfactory results.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.27 no.4
• /
• pp.511-517
• /
• 2003

An experiment is conducted to investigate the effect of air and water mass flow rates on cooling characteristics of mist impinging jet on a flat plate. The air mass flow rate ranges from 0.0 to 3.0 g/s, and water mass flow rates from 5.0 to 20.0 g/s. An air-atomizing nozzle is used fur the purpose of controlling air and water mass flow rates. The test section is designed distinctively from previous works to obtain local heat transfer coefficient distributions. Heat transfer characteristics of the mist impinging jet are explained with the aid of flow visualization. Surface temperature and heat transfer coefficient distributions become more uniform as air mass flow rate increases. The water flow rate provides substantial contribution to enhancement of cooling performance. On the other hand, The air mass flow rate weakly influences the averaged heat transfer rate when the water mass flow rate is low, but the averaged heat transfer rate Increases remarkably with the air mass flow rate in case of the high water mass flow rate.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.32 no.1
• /
• pp.103-111
• /
• 1987

Understanding grain filling characteristics represented by grain filling duration and grain filling rate is import-ant in improving higher yielding varieties and developing better cultural methods of rice (Oryza sativa L.). Recently developed 6 Japonica and 6 Japonica/Indica varieties were grown under 3 nitrogen levels at Experimental Farm of Chungbuk National University in 1986. The range of grain filling duration of 12 varieties was 20.9-39.0 days, while grain filling rate ranged from 53.8 to 136.6 mg. panicle$^{-1}$. day$^{-1}$. Although the difference of the average grain filling duration between Japonica varieties and Japonica/Indica was less than 4 days, the average grain filling rate of Japonica/lndica varieties was greater than Japonica more than 30%. Samgangbyeo showed the shortest grain filling duration of 21.0-24.2 days and the greatest grain filling rate of 119.3-143.8 mgㆍpanicle$^{-1}$. day$^{-1}$ under 3 nitrogen levels, while Seomjinbyeo and Milyang 23 showed the quite opposite grain filling characteristics. Nitrogen levels did not show any significant effects on grain filling characteristics. Negative correlation was round between grain filling duration and grain filling rate, and significant positive correlations of grain filling rate with grains/panicle, grain weight and panicle weight indicated that grain filling rate is more important characteristics of grain filling. Pathway analysis revealed that contribution of grain filling rate to panicle weight is rather indirect through grain weight.

• Journal of Korean Society of Forest Science
• /
• v.73 no.1
• /
• pp.43-54
• /
• 1986

This study was carried out to investigate the influence of light intensity on the growth of Korean white pine (Pinus koraiensis) seedlings. The seedlings were grown under four different relative light intensities: 100%, 63%, 37%, and 19% of full sunlight by covering with saran screen on seed bed. The results obtained were summarized as follows; 1. The highest shoot elongation was found at 37% in relative light intensity (RLI) plot, and the best growth in root, seedling length and diameter increment appeared at 100% on RLI plot. Contribution rates of shading to growth in shoot elongation, root growth, seedling length, and diameter increment were 9.3%, 26.2%, 21.0%, and 48.7%, respectively. 2. The greatest number of one-year-old needle fascicle was found at 100% in RLI plot, whereas that of two-year-old needle fascicle appeared at 37% in RLI plot. The contribution rate of the light intensity to number of needle fascicle was 3.9% and factor of leaf age contributed to number of needle fascicle in 27.8%. The length of needles grown under different light intensities varied with needle ages. The longest length of new needles appeared at 37% in RLI plot, but old needles were not clear in influence of light intensity. The contribution rate to needle length by the light intensity was 2.5%. 3. The heaviest value of the fresh and dry weight of seedlings appeared at 100% of RLI plot then decreased with light intensity. The contribution rates to fresh and dry weight by the shading were 38% and 7.6% respectively. 4. The largest value of the dry weight of needles appeared at 100% of RLI plot and then decreased with light intensity. The contribution rates to dry weight of needles by the light intensity was 13.18%. 5. The values of T/R ratio increased with decreased light intensity and the contribution rate was 7.0%. 6. Positive correlation and linear regressions were recognized between dry weight of leaf and other factors (dry weight of shoot, root, seedling and diameter increment).

• Korea Trade Review
• /
• v.42 no.6
• /
• pp.111-129
• /
• 2017

According to the World Bank statistics, China's contribution to global economic growth during the year of 2013-2016 was estimated at 31.6 percent. This figure is even larger than 29.0 percent, the contribution by summing each contribution of the United States, EU and Japan. The Chinese commodity trade accounts for up to 11.5 percent of world trade volume. Thus, we can consider that the Chinese economy has a strong influence on the global economy. The primary purpose of this study is to analyze the contribution level of Chinese seaborne trade volume on world economy. First, this study conducted a time-lag analysis using Moran test, so we can find that China's level of contribution to global economic growth varies from time to time. The contribution of the first phase (1999-2007) was nearly three times higher than the contributions from the second phase (2008-2016), suggesting that the overall contraction of the global trade volume starting from the subprime mortgage crisis in 2008 has continued until recently and recovery has not even occurred. Second, using the econometrics model, this study conducted an regression analysis of the impact of Chinese imports and exports in chemicals, grain, steel, crude oil, and container on global economic growth. Fixed effects model with time series data has been applied to examine the effect of Chinese seaborne trade volume on global economic growth. According to the empirical analysis of this study, China's exports of steel products, exports of container, imports of containers, imports of crude oil and imports of grain have significant contributions to global economic growth. Estimates of China's exports of steel products, exports of container, imports of containers, imports of crude oil and imports of grain are 1.023, 1.020, 1.019, 1.007 and 1.006, respectively. For example, the estimated value 1.023 of China's exports of steel products means that the growth rate can be 1.023 times higher than the current world GDP growth rate if Chinese seaborne trade volume of exports of steel products increased by one unit (one million tons). This study concludes that the expansion of China's imports and exports should be realized first to increase the global GDP growth rate. The expansion of Chinese trade can lead to a simultaneous stimulus of production and consumption in China, which can even lead to global economic growth ultimately. Thus, depending on how much China's trade will be broaden in the future, the width of global economic growth can be determined.

• Health Policy and Management
• /
• v.11 no.3
• /
• pp.46-70
• /
• 2001

Medical Aid expenditure Increased rapidly at a higher rate than that of Medical Insurance during the period 1992-1999. To establish an effective cost containment strategy, knowledge of the cause and the nature of the increase of Medical Aid expenditure is required. The purpose of this study was to analyze increasing rates of Medical Aid expenditure by the components of medical expenses. Data were collected using the Medical Aid Statistical Yearbook during the period of 1992-1999. The major findings were as follows: 1. The annual mean increasing rate of Medical Aid expenditure between 1992 and 1999 was 22.8%, which exceeding that of Medical Insurance expenditure (17.5%) between 1992 and 1999. Since 1998, Medical Aid expenditure increased even more rapidly than in previous years, with the increase in number of Medical Aid beneficiaries. 2. Of Medical Aid expenditure, that of inpatient and outpatient annually increased 24.2% and 22.8% respectively and that of type 1 and type 2 increased annually 28.8% (outpatient) ∼29.9% (inpatient), 14.3% (outpatient) ∼ 15.5% (inpatient). Therefore, Medical Aid expenditure of inpatient and type 1 led the increase of Medical Aid expenditure. 3. Between 1992 and 1997, the frequencies of utilization per beneficiary and the charges per case positively contributed to the increase of Medical Aid expenditure while the number of beneficiaries contributed negatively, but since 1998, the number of beneficiaries increased and positively contributed to the increase of Medical Aid expenditure. 4. According to the analysis of the charges per case, the increase of the price index led to the increase of the charges per case but the days of medication and service intensity also contributed to the increase of the charges per case variably by year. Considering the above findings, factors associated with the Medical Aid system affected the increase of Medical Aid expenditure in addition to the general factors of the increase in medical expenditure. In conclusion, it appears that a more intensive cost containment strategy is required to control rapidly increasing Medical Aid expenditure. For this, more precise analysis and development of policy considering the effect of the number of beneficiaries and the increase of price index is needed.

• Journal of Microbiology and Biotechnology
• /
• v.22 no.8
• /
• pp.1148-1154
• /
• 2012

A novel two-phase anaerobic treatment technology was developed to treat high-concentration organic cassava bioethanol wastewater. The start-up process and contribution of organics (COD, total nitrogen, and $NH_4^+$-N) removal in spatial succession of the whole process and spatial microbial diversity changing when sampling were analyzed. The results of the start-up phase showed that the organic loading rate could reach up to $10kg\;COD/m^3d$, with the COD removal rate remaining over 90% after 25 days. The sample results indicated that the contribution of COD removal in the pre-anaerobic and anaerobic phases was 40% and 60%, respectively, with the highest efficiency of 98.5%; TN and $NH_4^+$-N had decreased to 0.05 g/l and 0.90 g/l, respectively, and the mineralization rate of total nitrogen was 94.8%, 76.56% of which was attributed to the anaerobic part. The microbial diversity changed remarkably among different sample points depending on the physiological characteristics of identified strains. Moraxellaceae, Planococcaceae, and Prevotellaceae were dominant in the pre-anaerobic phase and Bacteroidetes, Campylobacterales, Acinetobacter, Lactobacillus, Clostridium, and Bacillus for the anaerobic phase. Methanosarcinaceae and Methanosaeta were the two main phylotypes in the anaerobic reactor.

• Journal of Korean Society on Water Environment
• /
• v.33 no.1
• /
• pp.78-89
• /
• 2017

Water quality monitoring network data is being affected continuously due to non-point source pollution arising from agricultural land located on the Gwangsancheon outlet in the Nakdong River basin. In this study, we have performed analysis of water quality monitoring system, water quality pattern using SOM and water quality in the Gwangsancheon for sub-basin located at Gisan-myeon in the Nakdong River basin. We have developed and applied the model to estimate the runoff and non-point source loading. As a result of SOM pattern, the effect of non-point source pollution was the largest in the paddy fields and fields. As a result of the developed model, we found contribution rate and reduction rate for non-point source loading according to change of landuse because the reduction effect of nonpoint pollutants was 20.9% of SS, 9.9% of TN, 21.2% of TP and 8.9% of TOC depending on the landuse change.

• Nuclear Engineering and Technology
• /
• v.51 no.6
• /
• pp.1633-1637
• /
• 2019

While considering the photon attenuation coefficient (${\mu}$) and its related parameters for photons shielding, it is necessary to account for its transmitted and reflected photons energy spectra and dose contribution. Monte Carlo simulation was used to study the efficiency of clay ($1.99g\;cm^{-3}$) as a shielding material below 150 keV photon. Am-241 gamma source and an X-ray of 150 kVp were calculated. The calculated value of ${\mu}$ for Am-241 is higher within 5.61% compared to theoretical value for a single-energy photon. The calculated half-value layer (HVL) is 0.9335 cm, which is lower than that of ordinary concrete for X-ray of 150 kVp. A thickness of 2 cm clay was adequate to attenuate 90% and 85% of the incident photons from Am-241 and X-ray of 150 kVp, respectively. The same thickness of 2 cm could shield the gamma source dose rate of Am-241 (1 MBq) down to $0.0528{\mu}Sv/hr$. For X-ray of 150 kVp, photons below 60 keV were significantly decreased with 2 cm clay and a dose rate reduction by ~80%. The contribution of reflected photons and dose from the clay is negligible for both sources.

• Journal of Korean Society on Water Environment
• /
• v.35 no.1
• /
• pp.43-54
• /
• 2019

The objective of this study was to assess the effect of policies on water quality management based on the changes in pollutants and water quality in Special Water Preservation Area (SWPA) of Lake Paldang watershed from 1990 to 2016. The population, total sewage and flow rate of wastewater in SWPA continuously increased from 1990 to 2016, while the location of new facilities for industrial and livestock facilities has been restricted. However, unlike the buffer zone in which industrial and livestock facilities were continuously reduced after implementing of TMDL, it was found that the effect of land-use regulations on industrial and livestock facilities in SWPA were mitigated by the increase in the size of large facilities. Since 1999 when the emission standard of public sewage treatment plants (STP) was changed, the water quality of Lake Paldang has increased despite the increase of pollutant source. Since emission standard of STP changed in 2012 (BOD 5 mg/L, TP 0.2 mg/L), BOD concentration in Lake Paldang has also improved to the level of water quality in the early 1990s where as TP concentration has remained at its lowest since 1990. BOD and TP average discharge concentration of 43 STP (${\geq}500m^3/day$) in 2016 have been maintained $1.7{\pm}0.7mg/L$ and $0.06{\pm}0.02mg/L$ respectively. While the discharged load of STP in SWPA was decreased by the concentration management, the contribution rate to the total discharged load of non-point pollutants increased to 70 % in 2015, and the contribution rate to the point discharged load of individual treatment facilities increased to 80 %.