• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.5A
• /
• pp.909-915
• /
• 2006

To predict autogenous shrinkage of concrete, unsaturated pore compensation factor could be calculated by experiments of autogenous shrinkage of cement paste on the assumption that the differences between degree of hydration and strain rate of autogenous shrinkage are unsaturated pore formation rate. Applying unsaturated pore compensation factor on modified Pickket model considering contribution factor and non-contribution factor to autogenous shrinkage of concrete, experimental data and existing model were compared. From the results modified Pickket model was verified to present similar tendency between Tazawa model and experimental data, but CEB-FIP model might be corrected because this model uses ultimate autogenous shrinkage underestimated and the same autogenous time function of concrete material properties considering only compressive strength.

• Journal of Korean Society for Atmospheric Environment
• /
• v.21 no.5
• /
• pp.495-505
• /
• 2005

This study is to estimate source contribution by air pollutantion types (point, area, line) over Seoul metropolitan area. The Air Pollution Model (TAPM) and the highly resolved anthropogenic and biogenic gridded emissions ($1km{\times}1km$) were applied to simulate $SO_2,\;NO_2,\;O_3\;and\;PM_{10}$ concentrations by seasons and contribution was estimated by their source types (point, area, line). The results showed that the simulated concentrations of secondary pollutant agreed well with observed values with an index of agreement (IOA) over 0.4, whereas IOAs over 0.3 were observed for most primary pollutants. The contributions of each source types by seasons were similar. The point source contribution was the highest for $SO_2$ at medium level ranged from $55.1\%\;to\;61.5\%$. But the contribution from area source during for the spring and summer increased as the concentration level increased. The line source contribution was the highest for $NO_2$ at all levels ranged from $68.3\%\;to\;93.1\%$. The results indicate that $SO_2$ emissions should be mainly controlled from point source, as well as area source at higher level concentration. Also, $NO_2\;and\;PM_{10}$ to from line source should be controlled.

• Korean Journal of Soil Science and Fertilizer
• /
• v.44 no.5
• /
• pp.722-726
• /
• 2011

The management standard on soil conditions in 'Fuji' apple to produce high quality fruit were not yet made. Therefore, this study was carried out to investigate the optimum soil environmental conditions of ten contents on production of high quality fruit in 'Fuji' apple. The soil and fruit characteristics were analyzed at total 60 orchards in major apple producing areas such as Chungju, Moonkyeung, yeongju, andong, yeosan and yeongcheon (10 orchards an area). The soil environmental factors affected fruit weight was highest relative contribution in saturated hydraulic conductivity of 36.5%. The bulk density and soil pH were low as relative contribution. The fruit weight was influenced by soil physical properties more than soil chemical properties. The soil environmental factors affected sugar content were hydraulic conductivity of 28.3% and organic matter content of 18.2%. The cultivation layer depth and soil pH were low as relative contribution. The fruit coloring was highest relative contribution in saturated hydraulic conductivity 55.9%. while soil pH, cation and soil texture were low. Fruit coloring was high influenced over 70% by soil physical properties. Finally, relative contribution on fruit quality related with sugar content, fruit weight, and coloring were high influenced by saturated hydraulic conductivity of 21.% and organic matter content of 18.7% but bulk density and cultivation layer depth were low relative contribution. The fruit growth and saturated hydraulic conductivity in 'Fuji' apple were very closely related. Therefore, orchard soil management to produce high quality fruit was very importance drainage management and organic matter application. We concluded that scientific soil management is possible by qualifiable of soil management factors.

• Journal of the Korean Chemical Society
• /
• v.19 no.2
• /
• pp.123-129
• /
• 1975

The rate constants of the hydrolysis of phenylvinylsulfone were determined by ultraviolet spectrophotometry at various pH and a rate equation which can be applied over wide pH range was obtained. The reaction mechanism of hydrolysis of phenylvinylsulfone and especially the catalytic contribution of hydroxide ion which did not study carefully before in acidic media, can be fully explained by the rate equation obtained. The rate equation reveals that: below pH 7, the reaction is initiated by the addition of water molecule to phenylvinylsulfone. At above pH 9, the overall rate constant is only dependent upon the concentration of hydroxide ion.

• Journal of Korea Technology Innovation Society
• /
• v.11 no.1
• /
• pp.72-90
• /
• 2008

What has been the contribution of industrial innovation to economic growth? Typically, the issue has been approached with growth-accounting methods augmented to include a "stock of knowledge". An independent estimate of the rate of return to R&D is found in order to impute patents granted to the accumulation of knowledge. Griliches(1973) then uses a regression approach to assess the effect of an R&D variable on the computed TFP growth rate. The regression coefficient on the R&D variable would provide an estimate of the social rate of return to R&D. The related studies tend to show high social rates of return to R&D, typically in a range of 20 to 40 % per year. We need to provide multiple equation dynamic system for productivity and innovation in Korean economy in state space form. A wide range of time series models, including the classical linear regression model, can be written and estimated as special cases of a state space specification. State space models have been applied in the econometrics literature to model unobserved variables like productivity. Estimation produces the following results. Considering the goodness of fit, we can see that the evidence is strongly in favor of the range $0.120{\sim}0.135$ for the elasticity of TFP to R&D stock in the period between 1970's and the early 2000's.

• Journal of Korean Society for Atmospheric Environment
• /
• v.19 no.6
• /
• pp.789-803
• /
• 2003

The purpose of this study is to compare the usefulness between Gaussian dispersion model and receptor model with the experimental result of the dispersion tracing of the particulate pollutants from Taean coal-fired power plants. For this purpose, the component analysis of the collected PM 10 samples was performed. In order to trace the pollution sources, factor analysis was done with the result of the component analysis. As a result of the correlativity analysis of the fifteen power plants' profiles offered by US EPA, the correlativity of No.11202 source profile showed highest rate up to 84.5%. Thus it was adopted as proper one and the contribution rate by each pollution source was calculated by Chemical Mass Balance (CMB)-8 model. The contribution rate, which was the effect rate of the power plants on each measuring point, were calculated with a range of 24∼52％ and the standard error was below 0.9 $\mu\textrm{g}$/㎥. This indicates the selection of the source profile was appropriate. Also, the concentrations of each point were calculated by the ISCST3 which is suggested by US EPA as one of the regulatory Gaussian dispersion model. The calculation result showed that the predicted concentration was 50∼58 $\mu\textrm{g}$/㎥, comparing with the measured result of 9∼65 $\mu\textrm{g}$/㎥. It was found that the concentration calculated by ISCST3 was underpredicted. It was thought that the receptor model was more favorable than the Gaussian dispersion model in estimating the effect of the particulate matter on a certain receptive point.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.15 no.4
• /
• pp.146-153
• /
• 2007

The detailed chemistry with reaction mechanism of GRI 2.11, which consists of 49 species and 279 elementary reactions, have been numerically conducted to investigate the flame structure and NO emission characteristics in a non-premixed counterflow flame of blended fuel of $H_2/CO_2/Ar$. The combination of $H_2,\;CO_2$, and Ar as fuel is selected to clearly display the contribution of hydrocarbon products to flame structure and NO emission characteristics due to the breakdown of $CO_2$. Radiative heat loss term is involved to correctly describe the flame dynamics especially at low strain rates. All mechanisms including thermal, $NO_2,\;N_2O$, and Fenimore are also taken into account to separately evaluate the effects of $CO_2$ addition on NO emission characteristics. The increase of added $CO_2$ quantity causes flame temperature to fall since at high strain rates diluent effect is prevailing and at low strain rates the breakdown of $CO_2$ produces relatively populous hydrocarbon products and thus the existence of hydrocarbon products inhibits chain branching. It is also found that the ratio of the contribution by Fenimore mechanism to that by thermal mechanism in the total mole production rate becomes much larger with increase in the $CO_2$ quantity and strain rate, even though the absolute quantity of NO production is deceased. Consequently, as strain rate and $CO_2$ quantity increase, NO production by Fenimore mechanism is remarkably augmented.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.63 no.2
• /
• pp.1-10
• /
• 2021

Agricultural reservoirs have a great influence on the water circulation in the watershed. It is necessary to evaluate the impact on water circulation by the agricultural reservoir. Therefore, in this study, we simulated the agricultural watershed through linkage of Hydrological Simulation Program Fortran (HSPF) and Module-based hydrologic Analysis for Agricultural watershed (MASA) and evaluated the contribution of the agricultural reservoir to water circulation by watershed water circulation index. As a result of simulating the Idong reservoir watershed through the HSPF-MASA linkage model, the model performance during the validation period was R2 0.74 upstream, 0.78 downstream, and 0.76 reservoir water level, respectively. To evaluate the contribution of agricultural reservoirs, three scenarios (baseline, present state, and present state without reservoir) were simulated, and the water balance differences for each scenario were analyzed. In the evaluation through the agricultural water circulation rate in the watershed, it was found that the water circulation rate increased by 1.1%, and the direct flow rate decreased by 13.6 mm due to the agricultural reservoir. In the evaluation through the Budyko curve, the evaporation index increased by 0.01. Agricultural reservoirs reduce direct runoff and increase evapotranspiration, which has a positive effect on the water circulation.

• Corrosion Science and Technology
• /
• v.7 no.2
• /
• pp.85-91
• /
• 2008

By operation in aqueous environment at high temperature and pressure, the structural materials from Primary Heat Transport System (PHTS) cover with protective oxide films, which maintain the corrosion rate in admissible limits. A lot of potential factors exist, which conduct to degradation of the protective films and consequently to intensification of the corrosion processes. The existing experience of different nuclear reactors shows that the water chemistry has an important role in integrity maintaining of the protective oxide films. To investigate the influence of water chemistry (pH, O2 dissolved, $Cl^-$, $F^-$) on corrosion of some structural materials (carbon and martensitic steel, Zr and Ni alloys) and to establish the maximum permissible values, corrosion experiments by static autoclaving and electrochemical methods were performed. The experimental results allowed us to establish the contribution of the water chemistry in initiation and evolution of some accelerated corrosion processes.

• Journal of Korean Public Health Nursing
• /
• v.11 no.2
• /
• pp.83-93
• /
• 1997

This study was done for the purpose of investigating college students' body weight and health behavior. The subjects for this study were 1421 students obtained by a convenient sampling from one junior college located in Mok-Po. The data were analyzed by self-reporting questionnaire from June 18 to 28, 1996. The data were analyzed by descriptive statistics with SAS program. The results were as followed; Factors of comparatively high contribution to overweight were male students, perception they were healthy. smoking, alcohol drinking, irregular sleep and eating pattern, sleep for 9 hours over, regular exercise, no snack, diet control for weight loss. Factors of comparatively high contribution to underweight were female students. perception they were unhealthy. no smoking and alcohol drinking. irregular sleep and eating pattern. high rate of snack, sleep for 9 hours over. In conclusion overweight and underweight were correlated with seven health habits' and we suggest health education related to seven health habits.