• 대한방사선기술학회지:방사선기술과학
• /
• 제24권1호
• /
• pp.67-73
• /
• 2001

In digital image processing, the homomorphic filtering approach is derived from an illumination-reflectance model of the image. It can also be used with an illumination-transillumnation model of X-ray film. Several X-ray images were applied to enhancement with histogram equalization and homomorphic filter based on an illumination-transillumination model. The homomorphic filter has proven theoretical claim of image density range compression and balanced contrast enhancement, and also was found a valuable tool to process analog X-ray images to digital images.

• IEIE Transactions on Smart Processing and Computing
• /
• 제6권3호
• /
• pp.168-174
• /
• 2017

Videos recorded on surveillance cameras or by car black boxes at night have distorted images due to illumination variation. Therefore, it is difficult to analyze morphological characteristics of objects, and it is limiting to use such distorted images as evidence in traffic accidents. Image restoration is performed by amplifying the brightness of nighttime images using linearized gamma correction to increase their contrast (which destroys visual information) and by minimizing degradation factors caused by irregular traveling.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권12호
• /
• pp.5998-6016
• /
• 2017

In thin-film transistor liquid-crystal displays (TFT-LCDs), which are most commonly used in mobile devices, the backlight accounts for about 70% of the power consumption. Therefore, most low-power-related studies focus on realizing power savings through backlight dimming. Image compensation is performed to mitigate the visual distortion caused by the backlight dimming. Therefore, popular techniques include pixel compensation for brightness recovery and contrast enhancement, such as histogram equalization. However, existing pixel compensation techniques often have limitations with respect to blur owing to the pixel saturation phenomenon, or because contrast enhancement cannot adequately satisfy the human visual system (HVS). To overcome these, in this study, we propose a novel dimming technique to achieve both power saving and HVS-awareness by combining the pixel compensation and histogram specifications, which convert the original cumulative density function (CDF) by designing and using the desired CDF of an image. Because the process of obtaining the desired CDF is customized to consider image characteristics, histogram specification is found to achieve better HVS-awareness than histogram equalization. For the experiments, we employ the LIVE image database, and we use the structural similarity (SSIM) index to measure the degree of visual satisfaction. The experimental results show that the proposed technique achieves up to 15.9% increase in the SSIM index compared with existing dimming techniques that use pixel compensation and histogram equalization in the case of the same low-power ratio. Further, the results indicate that it achieves improved HVS-awareness and increased power saving concurrently compared with previous techniques.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.407.1-407.1
• /
• 2016

Electrochromism is defined as a phenomenon which involves persistently repeated change of optical properties between bleached state and colored state by simultaneous injection of electrons and ions, sufficient to induce an electrochemical redox process. Due to this feature, considerable progress has been made in the synthesis of electrochromic (EC) materials, improvements of EC properties in EC devices such as light shutter, smart window and variable reflectance mirrors etc. Among the variable EC materials, solid-state inorganics in particular, metal oxide semiconducting materials such as nickel oxide (NiO) have been investigated extensively. The NiO that is an anodic EC material is of special interest because of high color contrast ratio, large dynamic range and low material cost. The high performance EC devices should present the use of standard industrial production techniques to produce films with high coloration efficiency, rapid switching speed and robust reversibility. Generally, the color contrast and the optical switching speed increase drastically if high surface area is used. The structure of porous thin film provides a specific surface area and can facilitate a very short response time of the reaction between the surface and ions. The large variety of methods has been used to prepare the porous NiO thin films such as sol-gel process, chemical bath deposition and sputtering. Few studies have been reported on NiO thin films made by using sol-gel method. However, compared with dry process, wet processes that have the questions of the durability and the vestige of bleached state color limit the thin films practical use, especially when prepared by sol-gel method. In this study, we synthesis the porous NiO thin films on the fluorine doped tin oxide (FTO) glass by using sputtering and anodizing method. Also we compared electrical and optical properties of NiO thin films prepared by sol gel. The porous structure is promised to be helpful to the properties enhancement of the EC devices.

• 대한방사선기술학회지:방사선기술과학
• /
• 제7권1호
• /
• pp.13-21
• /
• 1984

Subtraction is an essential technic to improve imaging quality in various radiological procedures. The limitations of subtraction, however, are well known. Blurred under-subtraction (BUS) method has been suggested to overcome and compensate these limitations. Ten cases of angiography were subtracted by conventional subtraction and BUS technic. Results of this study revealed that BUS method is simple to perform and imaging quality obtained by BUS is excellent. Comparing to conventional subtraction, BUS method has advantages. For example, BUS need no mask film or no immobilization of patient during examination. Improvement of imaging Qualify is achieved by edge enhancement, homogeneous blurring of background density and increasing contrast. With emphasis of its simplicity in technic, we would report that BUS method is a useful adjunct imaging technic in various radiological procedures.

• Advances in nano research
• /
• 제13권2호
• /
• pp.199-206
• /
• 2022

We present the high-brightness large-area 10.1" in-cell polarizer display panel integrated with a wire grid polarizer (WGP) and metal reflector, from the initial design to final system development in a commercially feasible level. We have modeled and developed the WGP architecture integrated with the metal reflector in a single in-cell layer, to achieve excellent polarization efficiency as well as brightness enhancement through the light recycling effect. After the optimization of key experimental parameters via Taguchi method, the roll nanoimprint lithography employing a flexible large-area tiled mold has been utilized to create the 90 nm-pitch polymer resist pattern with the 54.1 nm linewidth and 5.1 nm residual layer thickness. The 90 nm-pitch Al gratings with the 51.4 nm linewidth and 2150 Å height have been successfully fabricated after subsequent etch process, providing the in-cell WGPs with high optical performance in the entire visible light regime. Finally we have integrated the WGP in a commercial 10.1" display device and demonstrated its actual operation, exhibiting 1.24 times enhancement of brightness compared to a conventional film polarizer-based one, with the contrast ratio of 1,004:1. Polarization efficiency and transmittance of the developed WGPs in an in-cell polarizer panel achieve 99.995 % and 42.3 %, respectively.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.1491-1498
• /
• 2003

Droplet evaporation can be used to transfer large amounts of energy since heat is transferred across a thin liquid film. Spreading the drop over a larger area can enhance this heat transfer. One method of accomplishing this is to dissolve gas into the liquid. When the drop strikes the surface, a gas bubble nucleates and can grow and merge within the liquid, resulting in an increase in the droplet diameter. In this study, time and space resolved heat transfer characteristics for a single droplet striking a heated surface were experimentally investigated. The local wall heat flux and temperature measurements were provided by a novel experimental technique in which 96 individually controlled heaters were used to map the heat transfer coefficient contour on the surface. A high-speed digital video camera was used to simultaneously record images of the drop from below. The measurements to date indicate that significantly smaller droplet evaporation times can be achieved. The splat diameter was observed to increase with time just after the initial transient dies out due to the growth of the bubble, in contrast to a monotonically decreasing splat diameter for the case of no bubbles. Bursting of the bubble corresponded to a sudden decrease in droplet heat transfer.

• 농업과학연구
• /
• 제49권4호
• /
• pp.919-926
• /
• 2022

Fertigation, which has been introduced in agricultural fields since 1990, has been widely practiced in upland fields as well as in plastic film houses as part of the crop production system. In accordance with demands in the agricultural sector, a huge number of scientific studies on fertigation have been conducted worldwide. Moreover, with a combination of advanced technologies such as big-data, machine learning, etc., fertigation is positioned as an indispensable tool to achieve sustainable crop production and to enhance nutrient and water use efficiency. In this review, we focused on providing valuable information in terms of crop production and nutrient/water use efficiency. A variety of fertigation studies have described that enhancement of crop production did not differ relative to conventional method or slightly increased. In contrast, fertigation significantly improved nutrient/water use efficiency, with a reduction in use ranging from 20 to 50%. Water-soluble organic resources such as livestock manure and agricultural byproducts also have been identified as useful resources like chemical fertilizers. Furthermore, the initial irrigation point was generally recommended in a range of -10 - -40 kPa, although the point differed according to the crop and crop growth stage. From this review, we suggest that fertigation, which is closely integrated with advanced technology, could be a leading technology to attain not only food security but also carbon neutrality via improvement of nutrient/water use efficiency.

• 한국의학물리학회지:의학물리
• /
• 제14권3호
• /
• pp.196-202
• /
• 2003

3차원 입체조형방사선치료(3D conformal radiation therapy; 3D-CRT) 및 세기조절방사선치료(intensity modulated radiation therapy; IMRT) 에서와 같은 정밀 방사선 치료기술이 보다 효과적으로 이루어지기 위해서는 환자자세 오차를 최소화해야 한다. 치료계획용적(PTV)을 정할 때 필요한 마진을 최대한 줄여 줌으로써 치료 병변에 선량을 집중시키고, 정상조직의 선량은 감소시킬 수 있게 되기 때문이다. 이러한 목적 하에 조사문 사진(portal film)을 치료계획시 얻은 기준 영상에 정합시켜 환자자세 오차를 정량적으로 분석할 수 있는 프로그램 도구를 개발하고자 하였다. 현재 본원에서 치료 위치 확인을 위해서는 치료 계획 시행 중에 얻은 모의치료 사진과 치료시 EC-L 필름(KODAK사, 미국)을 사용하여 찍은 조사문 사진을 주로 사용하고 있다. 이 외에도, 모의치료시 영상을 디지털 캡춰한 영상이나, 치료계획으로부터 얻은 디지털화재구성영상(digitally reconstructed radiograph; DRR)도 기준 영상으로 이용할 수 있도록 하였다. 프로그램 제작 툴로는 IDL5.4 (RSI사, 미국)를 사용하였다. 조사문사진의 가장 큰 단점인 영상 대조도를 증가시키기 위해, histogram-equalization, adaptive histogram equalization, 특히 CLAHE (contrast limited adaptive histogram equalization) 등의 영상처리 기능을 구현하였다. 영상 정합 방법으로는 기준 영상에 골반입구(pelvic inlet) 와 같은 위치에 윤곽선을 그리고, 이를 조사문 사진 상에 중첩시킨 다음, 조사문 사진의 동일 해부학적 위치에 일치되도록 이동하여 그 오차를 수치화하였다. 조사문 사진에 CLAHE 필터를 적용한 결과, 치료면 확인을 위해 이중 조사된 영역의 대조도를 월등히 향상시킬 수 있었다. 전후면과 측면 영상을 위 과정을 사용하여 정합시킴으로, 전후, 좌우, 상하 방향으로의 환자자세 차이를 정량화 할 수 있었다. 또한, CLAHE 영상처리 기법을 이용하여 조사문 사진의 화질을 현저하게 향상시킬 수 있음을 확인하였다. 또한 'view-box' 방식과 비교하여 치료 환자자세의 정확도를 수치화 시킴으로써 계통오차(systemic error)와 임의오차(random error) 등의 정량적 분석이 가능해졌다. 더 나아가 환자자세오차를 교정하는 프로토콜을 도입한다면, 보다 정확한 치료에 도움이 될 것으로 기대한다.

• Design & Manufacturing
• /
• 제2권2호
• /
• pp.29-32
• /
• 2008

A back light unit (BLU) is a key module of a thin film transistor liquid crystal display (TFT-LCD), frequently utilized in various mobile displays. In this study, we experimentally characterize transcription and optical properties of concave and convex microlens arrays (MLAs) of light guide plate (LGP) fabricated by injection molding with polycarbonate as a LGP substrate material. Nickel mold inserts were manufactured by electroforming on the MLA which was fabricated by the thermal reflow of photoresist microstructures patterned by UV-photolithography. For the case of convex microlens, the height of replicated microlens was less than that of the mold insert while maintaining almost the same microlens diameter of the mold insert as the location of the microlens is far from the gate. In contrast, for the concave microlens, the diameter of replicated microlens was larger than that of mold insert, while showing almost the same microlens height as the mold insert. From the optical examination of replicated convex and concave MLAs, it was found that a higher luminance of the LGP was achieved by the concave MLAs compared to the convex MLAs (about 30% enhancement in this case)due to the utilization of a larger amount of light provided by the light sources.