• Tunnel and Underground Space
• /
• v.10 no.3
• /
• pp.355-365
• /
• 2000

As large underground projects such as radioactive waste disposal, hot water and heat storage, and geothermal energy become influential, the study, which consider all aspects of thermics, hydraulics and mechanics would be needed. Thermo-Hydro-Mechanical coupling analysis is one of the most complex numerical technique because it should be implemented with the combined three governing equations to analyze the behavior of rock mass. In this study, finite element code, which is based on Biot's consolidation theory, was developed to analyze the thermo-hydro-mechanical coupling in continuum rock mass. To verify the implemented program, one-dimensional consolidation model under the isothermal and non-isothermal conditions was analyzed and was compared with the analytic solution. The parametric study on two-dimensional consolidation was also performed and the effects of several factors such as poisson's ratio and hydraulic anisotropy on rock mass behavior were investigated. In the future, this program would be revised to be used for analysis of general discontinuous media with incorporating discrete joint model.

• Selected Papers of The Society of Naval Architects of Korea
• /
• v.2 no.1
• /
• pp.106-128
• /
• 1994

An elasto-plastic-damage constitutive model for ductile materials is proposed within the framework of a thermodynamic approach of continuum damage mechanics (CDM) in which internal irreversible thermodynamic changes of micro-structure of materials such as plastic deformation and damage evolution are considered as thermodynamic state variables. The new constitutive model can predict not only the elasto-plastic behaviors but also the sequential stiffness degradation process of ductile materials more rationally.

• Proceedings of the KOR-KST Conference
• /
• 1996.12a
• /
• pp.17-40
• /
• 1996

본 연구에서는 거시적 연속교통류 모형에 바탕을 둔 도시고속도로로 시뮬레이션모형의 개발이 시도되었다. 이 모형은 simple continuum model에 통행수요모형 기능을 강화시킨 것으로서 기존 연속교통류 시뮬레이션모형의 단점을 개선하였다. 제안된 시뮬레이션모형은 정산과정을 거쳐 미국 도시고속도로에서 수집한 현장자료에 의해 평가되었다. 특히 링크의 목적지별 차량대수 추정, 실시간 O-D추정의 문제가 확장칼만필터의 형태로 접근되었으며, 개발된 시뮬레이션모형을 ATMS전략에 활용하는 방안이 개발·평가되었다. 이들 전 과정을 통합한 모수적응적 모형(Parameter Adaptive Model)에 의해 교통량을 실시간으로 예측(Real time traffic prediction)하는 방법을 제안하였으며 현장자료에 의해서 평가되었다.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.05b
• /
• pp.633-636
• /
• 2006

Impact damage modeling of concrete under high strain rate loading conditions is investigated. A phenomenological penetration model that can account for complicated impact and penetration process such as the rate and loading history response of concrete, the microstructure-penetration interaction etc. is discussed. Constitutive law compatible with Second Law of thermodynamics and coupled damage and plasticity modelling based on continuum damage mechanics are also examined. The purpose of this paper is preliminarily to study with respect to impact and penetration models for concrete before the development of that model.

• Transactions of Materials Processing
• /
• v.13 no.7
• /
• pp.600-607
• /
• 2004

This paper addresses a viscoplastic constitutive model that allows a consistent way of modeling positive and negative rate sensitivities of flow stress concerned with dynamic strain aging. Based on the concept of continuum mechanics, a phenomenological constitutive model includes the use of a yield surface within the framework of unified viscoplasticity theory. To model negative rate sensitivity, rate-dependent back stress is introduced and flow stress in fully developed inelastic deformation regime is thus decomposed into the plastic contribution of rate independency and the viscous one of rate dependency.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.09b
• /
• pp.980-981
• /
• 2005

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.06a
• /
• pp.217-218
• /
• 2008

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.10a
• /
• pp.231-234
• /
• 2009

Based on combined continuum-fracture mechanics, fracture criterion was utilized to predict impact performance of advanced high-strength steel sheets: 340R and TWIP940. The macro-crack propagation behavior at high stress triaxiality was characterized by V-notch tests while deformation behavior at high strain rate was characterized by simple tension tests with various cross head speeds. The characterized mechanical properties were incorporated into the FE program ABAQUS/Explicit to simulate the charpy impact tests, which showed good agreement with experiments.

• Transactions of Materials Processing
• /
• v.4 no.2
• /
• pp.131-140
• /
• 1995

In this paper damage propagation of a material during forming is investigated with the concept of continuum damage mechanics. An isotropic damage model based on the theory of materials of type N is adopted to describe the damage process of a ductile material with large elasto-viscoplastic deformation. The stiffness degradation of the loaded material is chosen as a damage measure. The highly nonlinear equilibrium equations are reduced to the incremental weak form and approximated by the total Lagrangian finite element method. To simulate contact condition, extended interior penalty method with modified coulomb friction law is adopted. The displacement control method along with the modified Riks' continuation technique is used to solve the incremental iterative equations. As numerical examples, upsetting problem and backward extrusion problem are simulated and the results of damage propagation and $J_2$ stress contours with and without friction are presented.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1998.04a
• /
• pp.81-87
• /
• 1998

In this paper, a global acoustic design sensitivity analysis (DSA) of field point pressure with respect to structural sizing design variables is developed. Firstly acoustic sensitivity is formulated and implemented numerically. And it is combined with continuum structural sensitivity to obtain the global acoustic, design sensitivity. For this procedure, GASA (global acoustic design sensitivity analyzer) has been developed. A half scale of automobile cavity model is considered in this paper. In order to confirm accuracy of the results of global acoustic DSA obtained by GASA, it is compared with the result of central finite difference method. In order to reduce computation time, Rayleigh approximated solution is evaluated and compared with the solution which used every nodal velocities. Also the acoustic optimization procedure is performed using design sensitivities. From these numerical studies, it can be shown that global acoustic DSA is a useful tool to improve acoustic problems.