• 한국품질경영학회:학술대회논문집
• /
• 한국품질경영학회 2006년도 춘계학술대회
• /
• pp.149-152
• /
• 2006

In this paper, We study several method of CTQ measurement for improvement of Quality. Measurement are cornerstone of basic improvement of Science and Technology and are considered continuous thesis. In this paper, we survey measure several variable for CTQ for Six sigma. We introduce Taguchi's SN ration Which is important example good measure for improve quality Improvement are succeed by good select measure variable which is called CTQ which should agree problem define and final goal.

• 한국의료질향상학회지
• /
• 제8권2호
• /
• pp.186-207
• /
• 2001

Background : This study presented an analysis of healthcare quality indicators using data mining and a development of decision support system for quality improvement. Method : Specifically, important factors influencing the key quality indicators were identified using a decision tree method for data mining based on 8,405 patients who discharged from a medical center during the period between December 1, 2000 and January 31, 2001. In addition, a decision support system was developed to analyze and monitor trends of these quality indicators using a Visual Basic 6.0. Guidelines and tutorial for quality improvement activities were also included in the system. Result : Among 12 selected quality indicators, decision tree analysis was performed for 3 indicators ; unscheduled readmission due to the same or related condition, unscheduled return to intensive care unit, and inpatient mortality which have a volume bigger than 100 cases during the period. The optimum range of target group in healthcare quality indicators were identified from the gain chart. Important influencing factors for these 3 indicators were: diagnosis, attribute of the disease, and age of the patient in unscheduled returns to ICU group ; and length of stay, diagnosis, and belonging department in inpatient mortality group. Conclusion : We developed a decision support system through analysis of healthcare quality indicators and data mining technique which can be effectively implemented for utilization review and quality management in a healthcare organization. In the future, further number of quality indicators should be developed to effectively support a hospital-wide Continuous Quality Improvement activity. Through these endevours, a decision support system can be developed and the newly developed decision support system should be well integrated with the hospital Order Communication System to support concurrent review, utilization review, quality and risk management.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1442-1445
• /
• 2005

Several test methods, including micro strain/deformation measurement techniques, have been studied to more reliably measure the micro properties in micro/nano materials. Therefore, in this study, the continuous measurement of in-plane tensile strain in micro-sized specimens of thin film materials was introduced using the micro-ESPI technique. TiN and Au thin films 1 and $0.47\;\mu{m}$ thick, respectively, were deposited on the silicon wafer and fabricated into the micro-sized tensile specimens using the electromachining process. The micro-tensile loading system and micro-ESPI system were developed to measure the tensile strain during micro-tensile test. The micro-tensile stress-strain for these materials was determined using the algorithm for continuous strain measurement. Furthermore, algorithm for enhancing the sensitivity to measurement of in-plane tensile strain was suggested. According to the algorithm for enhancement of sensitivity, micro-tensile strain data between interfringe were calculated. It is shown that the algorithm for enhancement of the sensitivity suggested in this study makes the sensitivity to the in-plane tensile strain increase.

• Archives of Plastic Surgery
• /
• 제38권6호
• /
• pp.871-874
• /
• 2011

Purpose: In some patients with velopharyngeal insufficiency (VPI), Hypernasality can persist after surgical management. Continuous Positive Airway Pressure (CPAP) is applied to these patients for treating hypernasality. The purpose of this study is to report follow-up results of postoperative CPAP therapy. Methods: After performing palatal lengthening, CPAP therapy was applied to three patients for eight weeks from July of 2008 to November of 2009. Perceptual evaluation, nasometry, and nasopharyngeal endoscopy were performed to evaluate hypernasality, nasalance and size of the gap at velopharyngeal port. Each evaluation was made before surgery, right after CPAP therapy and during follow-up of more than a year after CPAP therapy. Results: All of the patients showed improvement in hypernasality right after CPAP therapy according to the auditory perceptual evaluation, nasometry and nasopharyngeal endoscopy. But the improvement in hypernasality in these patients did not last during follow-up. Conclusion: In this study, our results suggest that CPAP therapy is effective in reducing hypernasality for postoperative VPI patients immediately after the therapy, but hypernasality may be worsen in some patients during follow-up. Therefore we recommend follow-ups after CPAP therapy to see if the efficacy of CPAP therapy lasts.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2000년도 추계학술대회 논문집
• /
• pp.113-119
• /
• 2000

This study is to investigate the effects of cold forming method with steel sheet of SCP3C to improve continuous productivity. Experiments were carried out in various working conditions, such as the number of stamping and the punch temperature. The effects of the punch temperature and the number of stamping on drawability of steel sheet of SCP3C as well as clearance and draw-in in tile number of stamping were examined and discussed. The cooled the punch and the die and the blankholder heated by stamping were achieved at continuous productivity and quality improvement. The optimum forming condition for drawing trunk floor panel of SCP3C is shown as the punch is cooled by coolant of $-5^{\circ}C$ and at the same time both the die and the blankholder are heated by stamping and frictional heat,

• 한국의류학회지
• /
• 제28권6호
• /
• pp.862-871
• /
• 2004

This research is ultimately to understand the general behavior of luxury goods consumers and to diversify the consumer groups according to the relationships between their benefit seeking and brand loyalty. The subjects used for the research were 223 female consumers who purchased fashion luxury goods. The data were analyzed by factor analysis and multiple regression. The results showed that there were four factors in benefit seeking of luxury goods; self-improvement, aesthetics, uniqueness and quality. Each of the factors was analyzed in relation to brand loyalty and brand variety seeking motivations. Brand loyalty's factors were continuous brand loyalty, trademark brand loyalty and devoting brand loyalty. Brand variety seeking motivation factors were change/novelty seeking motivation, quality/recommendation, discounted price and unique types of product line. The consumers who were seeking self- improvement were showing trademark brand loyalty rather than continuous or devoting brand loyalty. Meanwhile, the quality benefit seeking customers showed continuous or devoting brand loyalty. The most important motivations in brand variety seeking was change/ novelty seeking. The implications and marketing strategies of the research were discussed.

• 디지털산업정보학회논문지
• /
• 제18권2호
• /
• pp.49-59
• /
• 2022

This study aims to understand the effects of perceived usefulness, perceived ease, and expected matching on user satisfaction and continuous use intention for the learning management system (LMS). To this end, an online survey was conducted on K University students located in Chungcheongbuk-do, and 488 data were analyzed and utilized. First, it was found that the expected match of the learning management system had an effect on perceived usefulness and perceived ease. Second, it was found that perceived usefulness, perceived ease, and expected matching had an effect on user satisfaction. Perceived usefulness, user satisfaction and perceived ease of use were found to have an effect on the intention to continue using. It can be seen that the improvement of the quality of the university education system has an effect on the improvement of learners' learning effects and satisfaction. Accordingly, it is necessary to seek various ways to continuously manage the quality of the learning management system.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2002년도 전력전자학술대회 논문집
• /
• pp.715-718
• /
• 2002

As the modern technology of continuous casting plant is focused on improvement of slab quality, the control system of strand driven roll which has positive effect is investigated in this paper. An irregular distribution of withdrawal force gives rise to horizontal crack in high and middle grade carbon steel. Based on the basic understanding on design concept of high technology company, monitoring the withdrawal force distribution of strand driven roll and analysis of the control system was Performed at continuous casters of POSCO. The control algorithm of withdrawal force distribution for A.C motor vector control, which was derived from above study and had been applied for POSCO Kwangyang 1-4 continuous casting plant, is presented.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제48권9호
• /
• pp.503-509
• /
• 1999

This paper proposes a new speed and tension control algorithm for multi-span continuous strip processing line. In this algorithm the speed reference of each roll is adjusted to make the output force follow the load balance reference using an outer loop controller in cascade. Using the information of the output force of the adjacent roll, it is shown that the strip tension between two rolls can be controlled as the desired value without tension sensor. An experimental set-up which consists of 4 driven and 3 measuring rolls is designed and built for the multi-span speed and tension control. The experimental result reveals conspicuous improvement of tension control performance by the proposed algorithm comparing to the conventional tension feedback controller.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 가을 학술논문 발표대회
• /
• pp.12-13
• /
• 2021

As construction projects are gradually getting larger and focusing on building skyscraper with the development of construction technology and the concentration of population in cities, the choice of the soil sheeting works is very important in terms of securing safety and economic feasibility. Further research is planned on the developed concrete guide-based continuous over lap pile method through the introduction of a system that automates vertical management, continuous improvement and supplementation so that the basement soil sheeting wall can be utilized as a building structure.