• Journal of Biosystems Engineering
• /
• 제16권2호
• /
• pp.148-158
• /
• 1991

This study was undertaken to develop the feed rate control system for the head feed thresher by making use of the microprocessor and to evaluate the response of the system to a various threshing conditions. It was verified the performance of the control system through experiments. Control conditions were determined based on the simulation results of control system. The control system set at RH=500rpm, RL=480rpm for the bundle feed was considered optimum to give a high threshing capability and still to stabilize the feeding seed regardless of the bundle size. The control system for the continuous spread feed set at the range of LH=15mm, and LL=12mm gave a high control performance for the feeding mass of 1.1Kg/m and lower tested. In addition, the feed rate proportionality constant should be set lower than one in order to keep the rotational speed of threshing cylinder within the range of 500~520rpm.

• 한국식품영양학회지
• /
• 제11권6호
• /
• pp.617-621
• /
• 1998

The production of red pigment from glucose by fed-batch culture of Monascus anka was investigated. In batch culture using fermentor, 200 rpm of agitation speed, 1vvm of aeration volume, and 10% (v/v) of inoculum size were optimal, respectively. The red pigment production was increased by removal of wall-attached mycelium. In an intermittent feeding fed-batch culture, dry cell weight increased to 30 g/l, adn the red pigment content reached 350 of absorbance at 495nm. In a continuous feeding fed-batch culture, dry cell weight increased to 22g/l, and the red pigment content reached 190 of absorbance at 495nm.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2003년도 추계학술대회
• /
• pp.36-40
• /
• 2003

In order to discuss the availability of aerostatic guideways driven by the coreless linear motor to ultra precision machine tools, a prototype of guideway is designed and tested in this research. A coreless linear DC motor with the continuous force of 156N and a laser scale with the resolution of $0.01\mu\textrm{m}$ are used as the feeding system. The experiments are performed on the static stiffness, motion accuracy, positioning accuracy, microstep response and variation of velocity. The guideway also has $0.21\mu\textrm{m}$ of positioning error and $0.09\mu\textrm{m}$ of repeatability, and it shows the stable response against the $0.01\mu\textrm{m}$ resolution step command. The velocity variation of feeding system is less than 0.6%. From these results, it is confirmed that the aerostatic guideway driven by the coreless linear motion is very useful for the ultra precision machine tools.

• 한국결정성장학회지
• /
• 제4권2호
• /
• pp.111-118
• /
• 1994

Crystal growth chamber 상부에 있는 reservoir에서 polycrystalline silicon powder를 연속적으로 feeding하면서 도가니 하부에 용융대를 형성시키고 seed를 meed를 dipping하여 회전시키면서 하부로 끌어내려 단결정을 성장시키는 연속성장법의 기본 원리를 확립하였고, 직접 고안 설계 제작한 연속성장 장치로 silicon 단결정을 성장시켰다. 본 연속성장법은 melt에 미치는 중력, 진동, melt의 표면장력, melt와 solid의 계면 장력, seed의 회전에 따른 원심력 등의 힘들이서로 상쇄되고 power, feeding양과 성장속도가 비례하여 적당한 조합을 이룰 때 안정한 연속성장을 할 수있다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2012년도 제44회 KOSCO SYMPOSIUM 초록집
• /
• pp.241-243
• /
• 2012

Experiments were conducted to get the design concepts for the continuous aluminum particle feeding system. Two opposed cylinders were used. Aluminum particles in one cylinder were ejected to the air by the supplying gas and the pressure of the other cylinder. It was not possible to eject more aluminum mass flowrate than that of gas if particles were just thrust by the pressure difference between two cylinders. Aluminum particle/air mixture in the flow system was successfully ignited by the electric spark.

• 한국미생물·생명공학회지
• /
• 제25권1호
• /
• pp.68-74
• /
• 1997

The conversion of D-sorbitol to L-sorbose by Gluconobater suboxydans was analyzed, and continuous production of L-sorbose was carried out in immobilized cell reactors. L-Sorbose production by high densities of resting cells was more effective than by conventional batch fermentations. Sorbitol dehydrogenase, an enzyme converting D-sorbitol to L-sorbose, did not suffer from substrate inhibition, but from product inhibition. When L-sorbose production was carried out with Ca-alginate-immobilized cells, about 60 g/l of L-sorbose was obtained. On the other hand, when the corn steep liquor (CSL) concentration of medium was reduced to 0.08%, 80 g/l of L-sorbose was obtained. Outgrowth inside the immobilized carriers was thought to block the pores of the carriers so that substrate could not easily diffuse through the carriers. Continuous production of L-sorbose was well accomplished in a bubble column reactor, and 6. 5 g/l.h of productivity and 81.2% of yield were obtained at a substrate feeding rate of 0.08h$^{-1}$ under the optimum conditions with carrier volume of 55% and aeration rate of 3 vvm.

• 대한기계학회논문집A
• /
• 제32권8호
• /
• pp.701-706
• /
• 2008

A continuous 3D tube bending machine has been developed for industrial boiler panel production. The machine consists of a main bender, a sub bender, a side bender, tube feeding rollers and control system that includes data management system. Tube position is controlled by a numerical control system. The bending former can be easily replaced according to the shape of bending form. Reduction of working time and improvement of production capacity from the practice have been achieved by bending a long tube in the machine developed.

• 한국환경과학회지
• /
• 제8권4호
• /
• pp.443-449
• /
• 1999

This paper describe the working of algal culture system under batch and continuous feeding effluents in biological treatment process. The main objective of this study was the determination of fundamental opeating parameters such as dilution rates, light intensity, biomass concentration, nutrients contents, which engender an effective nutrient and organic waste removal process. The results of this research indicate that the algae system will remove effectively nutrient and organic waste. In batch cultures, 91.8% dissolved orthophosphate and 83.3% ammonia nitrogen were removed from the sewage in ten days. In continuous flow systems, a detention time of 2.5 days was found adequate to remove 91% T-P, 87% T-N and 95% $NH_3-N$. At 22-28$^{\circ}C$, 60 rpm, with an intensity of 3500 Lux, the specific growth rate, k was 0.59/day in batch experiments. The optimal growth temperature and nutrients rate (N/P) were respectively $25^{\circ}C$ and 3~5. With an abundant supply of untrients, it was possible to sustain substantial population densities in the temperature range of 22~28$^{\circ}C$.

• 한국결정성장학회지
• /
• 제6권3호
• /
• pp.293-300
• /
• 1996

A continuous growth method (Orr's method) were developed to grow LiNbO3 single crystals. The optimum growth condition established are as follows; When the controlled temperature of a platinum crucible were 1190℃∼1210℃, the pulling rate was 2 mm/hr, the feeding rate was 1.5∼2.5 g/hr, and the rotation speed was 20 rpm. The phase and growth orientation of the grown LiNbO3 crystals wer characterized by a X-ray diffraction method. The overflowing phenomena, which induced cracking into the grown crystal during the process, was effectively suppressed by the control of the growth parameter.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.76.1-76
• /
• 2001

Up to now, various continuous-processing systems are used in the various industrial applications such as textile machines, iron-manufacturing plants, paper-making machines, printing machines, and so on. In these applications, the tension forced on the products in the control volume can be changed according to the velocity difference between the feeding roll and the delivery roll. Specially, the tension variation generated by the velocity difference, or the inertial effect can decreases the quality of the products in the textile process. In this paper, the tension control problem in a circular knitting machine system is treated to cope these problems. Firstly, the tension relationship in the winding mechanism of general continuous-processing ...