• Korean Journal of Chemical Engineering
• /
• v.35 no.11
• /
• pp.2145-2149
• /
• 2018

The formation of methanol directly from methane and steam was observed over Cu ion-exchanged mordenite. Furthermore, the continuous production of methanol was achieved by co-feeding methane and steam over Cumordenite. The methanol production rate was comparable to that reported in the stepwise process in which activation, methane reaction, and extraction of methanol were carried out separately.

• Asian-Australasian Journal of Animal Sciences
• /
• v.20 no.8
• /
• pp.1182-1189
• /
• 2007

An intracerebroventricular (ICV) infusion of somatostatin 1-28 (SRIF) was used as a thirst-controlling peptide antagonist to investigate whether or not thirst-controlling peptides are involved in the significant decrease in feed intake during the initial stages of feeding large-type goats on dry forage. A continuous ICV infusion of SRIF was conducted at a small dose of $4{\mu}g$ ml/h for 27 h from day 1 to day 2. Goats (n = 5) were fed roughly crushed alfalfa hay cubes for 2 h twice daily and water was given ad libitum. Feed intake was measured during ICV infusion of artificial cerebrospinal fluid (ACSF) and SRIF. The feed intake during SRIF infusion increased significantly compared to that during ACSF infusion. In comparison to the ACSF treatment, plasma osmolality during the SRIF treatment significantly decreased during the first half of the 2 h feeding period. The factor causing the decrease in plasma osmolality during the ICV infusion of SRIF was a decrease in plasma Na, K, Cl, and Mg concentrations. In comparison to the ACSF infusion treatment, parotid saliva secretion volumes during the 2 h feeding period in the SRIF infusion treatment were significantly larger. While there was no significant difference in cumulative water intake (thirst levels) between the SRIF and the ACSF treatments upon conclusion of the 2 h feeding period, based on the plasma osmolality results it is thought that thirst level increases brought about by alfalfa hay cube feeding in the first half of the feeding period were reduced. It is thought that the somatostatin-induced increases in feed intake during the 2 h feeding period in the present experiment were caused by decreases in plasma osmolality brought about by the somatostatin infusion. As a result, it is suggested that the significant decrease in feed intake during the initial stages of feeding in large-type goats given roughly crushed alfalfa hay cubes, was due to the actions of thirst-controlling peptides.

• Women's Health Nursing
• /
• v.15 no.1
• /
• pp.5-12
• /
• 2009

Purpose: This study was done to identify that Rooming-in of new mothers have an influence on continuous breast feeding. Method: This is a comparative survey study which was done by self reported questionnaire and telephone contacts. The subjects are collected from two groups which consist of 29 in Rooming-in group and 24 in Non-Rooming in group respectively. The data were collected method of this study was lists of given to mothers while they were in the hospital and interviews by telephone were done at their home 3 months and 6 months after delivery. Result: The results of this study were as follows: 1. The rates of breast feeding were 79.3% in the Rooming-in group and 41.7% in the non-Rooming in group after 3 months. There was a statistically significant difference between the two groups ($X^2$=10.217, p=.009). 2. The rates of breast feeding were 69.0% in the Rooming-in group and 29.2% in the Non-Rooming-in group at 6 months. There was a statistically significant difference between the two group ($X^2$=10.310, p=.012). Conclusion: Rooming-in system provoke an increase of the breast feeding rate in new mothers and encourage them to keep breast feeding. In addition, it would be desirable that hospitals apply Rooming-in system actively and encourage new mothers to breast feed for 24 hours a day. It could be make breast feeding successful.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.27 no.1
• /
• pp.89-96
• /
• 1994

The recovery posibility of granular sludge inactivated due to high organic loading at stawrt-up stage of UASB reactors was examined at various storage periods while kept at a constant temperature of $35^{\circ}C$. It was noticed that the inactivated sludge kept without feeding recovered microbial activity much faster than that kept with continuous feeding. The activity of the sludge gradually recovered to the point where the organic removal rate of 0.15g of 0.15g COD/g VSS-day at the inactivated stage had changed to 0.36g COD/g VSS-day after 60 days of storage without feeding, which was similar to the active granular sludge activity of 0.38g COD/g VSS-day. There was no significant different in the characteristics of activity recovery between granular sludge and smashed sludge.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.20 no.3
• /
• pp.350-356
• /
• 2011

In this paper, we proposed the automatic cutting mechanism of the perforation pipes in an automobile muffler. This cutting mechanism makes continuous work possible, because it performs the batch work via the sequential operation of loading, feeding, cutting, and discharging. The proposed cutting mechanism consists of the frame unit, escape unit, turning unit, feeding unit, vision system, clamping unit, spindle/cutting unit and cooling unit. And, these mechanisms have been modularized through mechanical, dynamical and structural optimized design using the SMO (SimDesigner Motion) analysis module. Also, the virtual prototype was carried out using the 3-D CAD program. The cutting process cycle is performed in the order of loading, vision processing, feeding, clamping, cutting and discharging. And the cycle time for cutting one piece was designed to be completed in four seconds.

• Journal of Korea Foundry Society
• /
• v.11 no.1
• /
• pp.44-53
• /
• 1991

The proper feeding conditions for thin Al-Alloy (AA336, JIS AC8A) castings in permanent mold were investigated to eliminate microshrinkage porosity. 5mm-thick plates (200mm long, 60mm wide) were cast with increasing padding taper from 0 to 5% under different conditions : (1) constant mold temperature of $350^{\circ}C$, (2) continuous production with uniform mold thickness (10mm), (3) continuous production with a negative taper of 2.5% in mold thickness (thickness decreasing in direction to riser). The test casting were machined off to the midplane and the shrinkage porosity was examined visually. The critical padding taper which can just eliminate the shrinkage porosity was determined for each condition, i.e. : (1) 4.5% at the constant mold temperature, (2) 3.5% for continuous production with the uniform mold thickness (3) 1.5% for continuous production with the taper in mold thickness. A computer simulation by a finite difference analysis program was applied to the test casting. The liquid fraction gradient (LFG) and the temperature gradient divided by the square root of the cooling rate (G /SR) were calculated at the end of solidification and compared with the shrinkage porosity area in the castings. For the case of constant mold temperature, LFG is a better parameter to predict shrinkage porosity than G /SR and its critical value is around 11%/cm. But for the case of continuous production, neither LFG nor G /SR could be a reliable parameter. The experimental results about the critical padding taper are of practical interest for designing permanent molds and castings. The computer simulation results stimulate further research to be directed on the prediction of centerline microshrinkage porosity in continuous production.

• Journal of Biosystems Engineering
• /
• v.13 no.3
• /
• pp.20-31
• /
• 1988

This study was undertaken to investigate the load characteristics of the head-feed thresher, which may be affected by various factors such as physical properties of grain, thresher design parameters and its operational condition. The study was conducted at an initial step toward developing an automatic feed-rate control system of the head-feed thresher. A microcomputer-based data acquisition system for the load-speed characteristic of the thresher-shaft and the rail-deflection of the feeding device in accordance with a varied feeding thickness was developed. The sensors being developed and used for sensing the torque and speed of the cylinder and the power-input-shaft and the feeding thickness showed a high accuracy. A microcomputer-based data acquisition system developed in this study was assessed as adequate for a rapid acquisition and analysis of data. The effect of the feed-rate on the torque and speed of the thresher shaft, when fed intermittently by bundles, affected not by the rice varieties but by the dryness of threshing material tested. When fed by the continuous constant thickness, the torque and speed of the cylinder due to the increase of the feed-rate or feeding thickness were given by the relation by the second order parabola.

• Journal of Chest Surgery
• /
• v.51 no.1
• /
• pp.76-80
• /
• 2018

Early diagnosis followed by primary repair is the best treatment for spontaneous esophageal perforation. However, the appropriate management of esophageal leakage after surgical repair is still controversial. Recently, the successful adaptation of vacuum-assisted closure therapy, which is well established for the treatment of chronic surface wounds, has been demonstrated for esophageal perforation or leakage. Conservative treatment methods require long-term fasting with total parenteral nutrition or enteral feeding through invasive procedures, such as percutaneous endoscopic gastrostomy or a feeding jejunostomy. We report 2 cases of esophageal leakage after primary repair treated by endoscopic vacuum therapy with continuous enteral feeding using a Sengstaken-Blakemore tube.

• KSBB Journal
• /
• v.9 no.2
• /
• pp.230-237
• /
• 1994

Spin-filters are used as cell separation devices for achieving high cell density and high productivity in animal cell culture. We have proposed a model for the cell growth in a spin-filter perfusion culture and examined the effects on cell growth by several parameters including ammonia inhibition, specific growth rate, specific feeding rate, and cell retention. Results from computer simulation and sensitivity analysis indicate that the cell retention affects the cell growth mostly while there is a significant inhibition on cell growth by the ammonia accumulated during the culture. The specific feeding rate has minimal effects on cell growth, which is consistant with the fact that the cell growth with a step feeding is quite similar to that with a continuous feeding.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.7 no.2
• /
• pp.264-267
• /
• 2004

Beriberi, which is caused by thiamin deficiency, is a rare disease in recent years. But it has been described in the Eastern literature as far back as the 17th century. Early symptoms are fatigue, apathy, irritability, drowsiness, anorexia, nausea, vomiting and abdominal pain. Signs and symptoms of progression are peripheral neuritis, paresthesia, decreased tendon reflex and congestive heart failure. Thiamin deficiency remains as an important health care issue in many world population, specially in AIDS, pregnancy women and TPN associated patients. The best diagnostic test is assessing clinical response to administration of thiamin. We have experienced a case of Beriberi caused by continuous rice-soup feeding during one and half years in a 7-year-old boy.