• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 추계학술대회 논문집
• /
• pp.417-417
• /
• 2009

The application of solar energy, in the field of alternative energy, was on the increase tendency. In the case of advanced nations, through continuous R&D, solar hot water heater with high efficiency has been used for the house and the industrial process on business, advanced nations were reached up the experimental stage of solar generation system. But, the actual circumstance of the domestic has been not accomplished the popularization of solar hot water heater and the settlement of it which is the fundamental stage of the solar energy usage. This trouble, the domestic was flooded with small enterprise for producing solar hot water heater, was caused by the popularization and the production without verification of performance. To supply the monitoring program for evaluating solar hot water heater, this research was purpose to improve the technical development of the enterprise for producing solar-heat hot-water-boiler and served as an aid for the enlargement and the popularization on solar energy.

• 한국환경농학회지
• /
• 제29권4호
• /
• pp.315-327
• /
• 2010

A vast increase of antibiotics usage in concentrated animal feeding operations (CAFOs) over the last few decades has led to an environmental risk due to the presence of antibiotic residuals in different environmental compartments. Especially in Korea, the use of antibiotics in CAFOs is much greater than in other developed countries. One of the primary adverse impacts of antibiotic residuals in the environment is that they readily produce antibiotic resistant bacteria (ARB), which exert detrimental effects on the ecosystem as well as human health. In this article, the impacts of veterinary antibiotic residuals with regard to their quantification and management, and desirable remediation technologies have been widely reviewed. This review article concluded that the continuous monitoring should be required to ensure the safety of antibiotic residuals in the surrounding environments. Furthermore, the management guidelines of antibiotic residuals need to be developed in the future.

• 대한약침학회지
• /
• 제6권3호
• /
• pp.15-21
• /
• 2003

Background : This study focuses on the new acupuncture method of embedding method which inserts a substance on the acupuncture points for continuous stimulation. Clinical applications and cautions were examined through literary investigations. Results : Based on the literary consideration of embedding method, the following results were obtained : 1. Embedding method is a combination of traditional and embedding technique to provide longer duration of stimulation on the acupuncture points. 2. To administer the embedding method, one needs to utilize a embedding thread besides acupuncture apparatus. Sheep gut is commonly used in China and the surgical thread is the choice in Korea. 3. Embedding method may vary from the patient to patient, depending on the nature and location of the illness. Piercing, embedding, and tying are some of the possibilities. 4. Embedding method may have different arrangement of threads based on the choice of usage. 5. Embedding method is effective for various chronic illnesses such as aches, functional diseases, and the diseases of internal organs. 6. When using the embedding methods, cautions against infection and side effects due to strong stimulation are mandatory.

• 한국미생물생명공학회:학술대회논문집
• /
• 한국미생물생명공학회 2000년도 Proceedings of 2000 KSAM International Symposium and Spring Meeting
• /
• pp.94-99
• /
• 2000

Bioluminescence is being used as a prevailing reporter of gene expression in microorganisms and mammalian cells. Bacterial bioluminescence draws special attention from environmental biotechnologists since it has many advantageous characteristics, such as no requirement of extra substractes, highly sensitive, and on-line measurability. Using bacterial bioluminescence as a reporter of toxicity has replaced the classical toxicity monitoring technology of using fish or daphnia with a cutting-edge technology. Fusion of bacterial stress promoters, which control the transcription of stress genes corresponding to heat-shock, DNA-, or oxidative-damaging stress, to the bacterial lux operon has resulted in the development of novel toxicity biosensors with a short measurement time, enhanced sensitivity, and ease and convenient usage. Therefore, these recombinant bioluminescent bacteria are expected to induce bacterial bioluminescence when the cells are exposed to stressful conditions, including toxic chemicals. We have used these recombinant bioluminescent bacteria in order to develop toxicity biosensors in a continuous, portable, or in-situ measurement from for air, water, and soil environments. All the data obtained from these toxicity biosensors for these environments were found to be repeatable and reproducible, and the minimum detection level of toxicity was found to be ppb (part per billion) levels for specific chemicals.

• 천문학회보
• /
• 제36권2호
• /
• pp.90.2-90.2
• /
• 2011

At Kyoto University, a continuous solar full-disk observation in CaII K line had been done during 44 years of 1926 - 1969. The observation was done with a Askania spectroheliograph on daily base. The images were taken on photographic plates. We started a project to archive these image data into a digital database which will be open to the public for scientific researches. One of the scientific usage of the database is to study the long term variation of the solar chromospheres. Since the area of CaII K plage area is a measure of solar chromospheric heating, we can do comparative study of the sunspot cycle and the chromospheric heating cycle of the sun. Another interesting field of scientific utilization of the database is the long term variation of the heating of terrestrial upper atmosphere. As was shown by Yokoyama, Masuda and Sato (2005), the area of the CaII K plage is a good proxy measure of solar EUV irradiation onto the upper atmosphere of the earth. Thus the completion of our database will serve to supply a basic and long-span data for upper atmospheric heating issues by the cooperative study with the Inter-university Upper atmosphere Global Observation NETwork (IUGONET) developed in Japan.

• KIEAE Journal
• /
• 제16권2호
• /
• pp.23-31
• /
• 2016

Purpose: Recently energy consumption is rapidly increasing due to continuous development of social evolution in various field. In this situation, there is a lot of effort to reduce this energy consumption in many ways, especially in building energy. Preceding studies already started to analyze the housing area such as zero energy house and passive house by researching annual building energy consumption, but to apply the results of housing to office building is insufficient since it has different consumption tendency. Method: In this study, eQuest program was used for simulation and the base model is selected among standard office building in ASHRAE 90.1. Variables are divided into passive and active factors for comparison. Result: In passive factors, glazing system showed the highest energy saving rate by 21.3% with triple low-e glass and enhancing wall u-value showed the lowest energy saving rate by 3.6% with 0.15 m2/K. In active factors, VAV system showed 30.9% energy saving rate when compared to CAV system, and heat exchanger showed 10.2% energy saving rate. For regeneration energy part, photovoltaic panel generated 10.4% of base annual energy usage.

• 산업경영시스템학회지
• /
• 제41권1호
• /
• pp.110-117
• /
• 2018

Machines and facilities are physically or chemically degenerated by continuous usage. One of the results of this degeneration is the process mean shift. By the result of degeneration, non-conforming products and malfunction of machine occur. Therefore a periodic preventive resetting the process is necessary. This type of preventive action is called 'preventive maintenance policy.' Preventive maintenance presupposes that the preventive (resetting the process) cost is smaller than the cost of failure caused by the malfunction of machine. The process mean shift problem is a field of preventive maintenance. This field deals the interrelationship between the quality cost and the process resetting cost before machine breaks down. Quality cost is the sum of the non-conforming item cost and quality loss cost. Quality loss cost is due to the deviation between the quality characteristics from the target value. Under the process mean shift, the quality cost is increasing continuously whereas the process resetting cost is constant value. The objective function is total costs per unit wear, the decision variables are the wear limit (resetting period) and the initial process mean. Comparing the previous studies, we set the process variance as an increasing concave function and set the quality loss function as Cpm+ simultaneously. In the Cpm+, loss function has different cost coefficients according to the direction of the quality characteristics from target value. A numerical example is presented.

• ETRI Journal
• /
• 제19권4호
• /
• pp.344-362
• /
• 1997

The delay which is one of the quality of service parameters is considered to be a crucial factor for the effective usage of real-time audio and video streams in interactive multimedia collaborations. Among the various causes of the delay, we focus in this paper on the local delay concerned with the schemes which handle continuous inflow of encoded data from constant or variable bit-rate audio and video encoders. We introduce two kinds of implementation approaches, pull model and push model. While the pull model periodically pumps out the incoming data from the system buffer, the push model receives events from the device drivers. From our experiments based on Windows NT 3.51, it is shown that the push model outperforms the other for both constant and variable bit-rate streams in terms of the local delay, when the system suffers reasonable loads. We interpret this experimental data with M/G/1 multiple vacation queuing theories, and show that it is consistent with the queuing theoretic interpretations.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2005년도 전력전자학술대회 논문집
• /
• pp.723-726
• /
• 2005

The application of solar energy, in the field of alternative energy, was on the increase tendency. In the case of advanced nations, through continuous R&D, solar hot water heater with high efficiency has been used for the house and the industrial process on business, advanced nations were reached up the experimental stage of solar generation system. But, the actual circumstance of the domestic has been not accomplished the popularization of solar hot water heater and the settlement of it which is the fundamental stage of the solar energy usage. This trouble, the domestic was flooded with small enterprise for producing solar hot water heater, was caused by the popularization and the production without verification of performance. To supply the monitoring program for evaluating solar hot water heater, this research was purpose to improve the technical development of the enterprise for producing solar-heat hot-water-boiler and served as an aid for the enlargement and the popularization on solar energy.

• 한국정보시스템학회지:정보시스템연구
• /
• 제8권1호
• /
• pp.45-63
• /
• 1999

Today, information society is affected by new technologies including Electronic Commerce(EC), Electronic Data Interchange(EDI), Commerce At Light Speed(CALS ), multimedia and teleconferencing. Electronic Commerce is believed to be a field that will bring about a huge revolution of human life in the 21st century and thus its industry will give greatly influential effect on other industries In this paper, we have surveyed and studied through the internet and related materials for the development of framework of Electronic Commerce. It is required that we need the leading role of our government for the earlier activation of Electronic Commerce usage and have to establish the solid background of EC technology creation of our nation's originality and to activate the venture industry oriented for idea and technology rather than the industries in the form of larger enterprises. In conclusion, we have to expand our own ability of research and development to keep the continuous growth of our Electronic Commerce market and industries through the development of new product and prior acquisition of market as well as to expand the path of various technology aquisition by the strategic M&A and capital investment with the leading foreign enterprises.