• Proceedings of the KSR Conference
• /
• 2004.06a
• /
• pp.1465-1467
• /
• 2004

Compared with other transport means, safety and timeliness are the merits of railways. Unexpectedly when accident happens, much time and human strength are required to cope with the accident. And for swift recovery, systematic rehabilitation is needed. Recently using MTS(Moving picture Transmission System), we can perform accident rehabilitation and recording work efficiently. MTS is the device that transmits continuous picture information from accident field to control center. e are developing the appropriate system to railway situation to make use of the existing information communication technology, processing technology of video-tex, super high speed transmission technology through fiber-optic, copper cable and network description of information Technology, etc. If these communication-based can technologies are applied to railway system, railway managers can control the accident by inspecting the picture of accident field and can contribute to the safe train operation and the improvement of railway management. In this paper, we investigate the connecting methods when optical fiber is used for moving picture data transmission of train accidents, and its problems. And, we validate MTS's performance through about 28km section of field test.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2006.06a
• /
• pp.40-44
• /
• 2006

Sandwich structures, which are composed of a thick core between two faces, are commonly used in many engineering applications because they combine high stiffness and strength with low weight. Accordingly, the usage of sandwich structure is very widely applied to the aircraft, the automobile and marine industry, etc., because of these advantages. In this paper, we have investigated the buckling protection of an inner structure plate and the useful corrugated configuration for contact, and the fabrication method of the inner structure plate for large area using the continuous molding process. Also, we have guaranteed the accuracy of the molding process through the micro corrugated mold fabrication and secured the accuracy and analyzed aspect properties of the inner structure plate fabricated for a large area using the partial mold process.

• Textile Coloration and Finishing
• /
• v.22 no.3
• /
• pp.214-219
• /
• 2010

Polyethylene(PE) films were photocrosslinked by continuous UV irradiation. Benzophenone addition as low as 1wt% into the PE film increased the gel fraction up to 96%. The photocrosslinking was attributed to the recombination of PE radicals generated upon UV irradiation, which was enhanced by the hydrogen abstraction of the added benzophenone. Also the crossliked PE showed higher thermal stability and decreased crystallinity with increasing UV energy as shown by TGA, XRD and DSC analysis. It was also possible to fix 5.4% octadecane into PE by the photocrosslinking. The crosslinked PE film containing octadecane showed lower tensile strength and modulus coupled with higher extension compared to that without octadecane, which can be used as a new plasticizing method for the crosslinked PE film.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.207-208
• /
• 2006

Sandwich structures, which are composed of a thick core between two faces, are commonly used in many engineering applications because they combine high stiffness and strength with low weight. In this paper, we have investigated the buckling protection of an inner structure plate and the useful corrugated configuration for contact, and the fabrication method of the inner structure plate for large area using the continuous molding process. Also, we have guaranteed the accuracy of the molding process through the micro corrugated mold fabrication and analyzed aspect properties of the inner structure plate fabricated for a large area using the partial mold process.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1997.10a
• /
• pp.163-170
• /
• 1997

The present paper describes an investigation into the application of the genetic algorithm(GA) in the optimization of structural design. Stochastic processes generate an initial population of designs and then apply principles of natural selection/survival of the fittest to improve the designs. The five test functions are used to verify the robustness and reliability of GA, and as a numerical example, minimum weight of a cantilever composite laminated beam with a mix of continuous, integer and discrete design variables is obtained by using GA with exterior penalty function method. The design problem has constraints on strength, displacements, and natural frequencies, and is formulated to a multidimensional nonlinear form. From the results, it is found that the GA search technique is very effective at finding the good optimum solution as well as has higher robustness.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.11a
• /
• pp.137-138
• /
• 2014

The aim of this research is suggesting the method of obtaining well-graded aggregates for concrete replacing the recycled aggregate which size range is from 5 to 13 mm to currently used gap-graded natural aggregates which size range is only 13 to 25 mm. according to the tests results, the workability of concrete was improved with replacing the aggregates of 5 to 13 mm of size range because of compensating gap-grading. Furthermore, there was an improvement in compressive strength when the aggregates of 5 to 13 mm of size range was replaced because obtained well-graded aggregates contributed on increasing adhesiveness and filling internal pore system. Comparing replacing recycled aggregate to natural aggregate, there was no significant difference on the performances.

• Journal of Korea Foundry Society
• /
• v.38 no.1
• /
• pp.9-15
• /
• 2018

Electromagnetic continuous casting (EMCC) was used to fabricate Ti-6Al-4V alloys with properties suitable for medical applications. Ti-6Al-4V alloy ingots fabricated by EMCC were subjected to heat treatment, such as residual stress removing (RRS), furnace cooling after solution treatment (ST-FC) and water-cooling after solution treatment (ST-WC), in order to obtain characteristics suitable for the standard. After component analysis, the microstructure and mechanical properties (tensile strength and elongation) were evaluated by ICP, gas analysis, OM, SEM, a Rockwell hardness tester and universal testing machine. The Ti-6Al-4V alloy ingot fabricated by EMCC was fabricated without segregation, and the lamellar structure was observed in the RRS and ST-FC specimens. The ST-WC specimen showed only martensite structure. As a result of evaluating the mechanical properties based on the microstructure results, we found that the water-cooled heat treatment condition after the solution treatment was most suitable for the Ti-6Al-4V ELI standard.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.7 no.4
• /
• pp.91-97
• /
• 2003

The maximum moment may occur at interior supports of continuous bridges. If the bigger moment is applied on them, a local yielding at interior supports may occur. They may show plastic behaviors, and the moment will be redistributed. The strength design, L.F.D., redistributes 10% of the negative moment which is obtained from the elastic analysis. However, A.L.F.D method computes the moment which is redistributed. This moment is called automoment. The moment-rotation curve is needed to find automoment. In this paper moment-rotation curve for compact sections suggested from AASHTO Guide Specifications is used to find automoment. Based on A.L.F.D. limit states specification method, a three-span continuous bridge is designed.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.37 no.4
• /
• pp.345-353
• /
• 2004

Target strength (TS) of Japanese common squids (Todarodes pacificus) were measured using 38 and 120 kHz split beam scientific echosounders under the live condition. For the TS measurement of an individual, a total of 3 squids (mantle length (ML): 22.8, 25, and 27 cm) were used using small fishhook method, whereas for measurement of swimming angle, a total of 8 squids (ML: 21-27 cm) were used under live condition, confined with net cage with 2 m diameter At the same time, two underwater video cameras enabled continuous monitoring of squid behavior. Considering normal behavior, the mean TS at 38 and 120 kHz varied from -48.6 to -45.9 dB, and from -46.5 to -44.6 dB, respectively In both frequencies, mean TS at 120 kHz is relatively higher than that of 38 kHz, approximately 1.3-2.5 dB. From free living condition, the mean swimming angle of the squlds was $-24^{\circ}$. The results of the measurement will be provided basic information for conducting acoustic surveys of the squid.

• Journal of Distribution Science
• /
• v.12 no.4
• /
• pp.31-39
• /
• 2014

Purpose - This study investigates the following two issues. First, we attempt to find the important determinants of housing investment and to identify their significance rank using survey panel data. Recently, the expansion of global uncertainty in the real estate market has directly and indirectly influenced the Korean housing market; households demonstrate a sensitive reaction to changes in that market. Therefore, this study aims to draw conclusions from understanding how the impact of financial strength of the household is related to house investment. Second, we attempt to verify the effectiveness of diverse indices of financial strength such as DTI, LTV, and PIR as measures to monitor the housing market. In the continuous housing market recession after the global crisis, the government places top priority on residence stability. However, the government still imposes forceful restraints on indices of financial strength. We believe this study verifies the utility of these regulations when used in the housing market. Research design, data, and methodology - The data source for this study is the "National Survey of Tax and Benefit" from 2007 (1st) to 2011 (5th) by the Korea Institute of Public Finance. Based on this survey data, we use panel data of 3,838 households that have been surveyed continuously for 5 years. We sort the base variables according to relevance of house investment criteria using the decision tree model (DTM), which is the standard decision-making model for data-mining techniques. The DTM method is known as a powerful methodology to identify contributory variables for predictive power. In addition, we analyze how important explanatory variables and the financial strength index of households affect housing investment with the binary logistic multi-regressive model. Based on the analyses, we conclude that the financial strength index has a significant role in house investment demand. Results - The results of this research are as follows: 1) The determinants of housing investment are age, consumption expenditures, income, total assets, rent deposit, housing price, habits satisfaction, housing scale, number of household members, and debt related to housing. 2) The impact power of these determinants has changed more or less annually due to economic situations and housing market conditions. The level of consumption expenditure and income are the main determinants before 2009; however, the determinants of housing investment changed to indices of the financial strength of households, i.e., DTI, LTV, and PIR, after 2009. 3) Most of all, since 2009, housing loans has been a more important variable than the level of consumption in making housing market decisions. Conclusions - The results of this research show that sound financing of households has a stronger effect on housing investment than reduced consumption expenditures. At the same time, the key indices that must be monitored by the government under economic emergency conditions differ from those requiring monitoring under normal market conditions; therefore, political indices to encourage and promote the housing market must be divided based on market conditions.