• Journal of Applied Tourism Food and Beverage Management and Research
• /
• v.12 no.2
• /
• pp.1-41
• /
• 2001

The effect of smoking on the quality sausage Sausages were prepared from beef, port, chickens, games, fish and shellfish with polyphosphate salt and spices. Sausage history goes back to 3,000 years of age. The procedure of sausage 1) Meat Curing 2) Meat Control 3) Add Spices 4) Permissible Ingredients 5) Grinding 6) Mixing Emulsion 7) Stuffing 8) Showing 9) Smoking 10) Cooking 11) Drying 12) Packaging Sausage Product to get information on the effect of smoking onto the quality of meat produces. Sausage was smoked under a given conditions. Smoking was conducted as 35f$^{\circ}C$to 6$0^{\circ}C$ the related humidity of smokehouse was still at 60 to 70 percent. Results are as follows: 1. The Penetrated smoke in sausage was prolonged < p.<0.02 when sausage was smoked 2hours at 60~$65^{\circ}C$ the penetrated amount of free acetone in sausage was 0.5mg%. 2. Peroxide value of sausage as heating treatment both at 3$0^{\circ}C$ and at 5$0^{\circ}C$ was prolonged. 3. When sausage was heated at 3$0^{\circ}C$, bacteria of sausage increased In number while at 60~$65^{\circ}C$ bacteria of sausage increased In number fourteen hours. 4. When sausage was treated with smoking the distribution of free amino acids in sausage was changed markedly. 5. The longer smoking time of the products was the higher the content. 6. In case of oak wood smoke flavoring all of test samples. 7. Rapid decrease of does-response mutagenic curve of the smoke flavoring of oak wood and apple wood by in the peak of curve and phenol in the smoke flavoring. Continuous efforts are required to make sausages easily in the butcher shops and in the restaurants. 8. Sausage texture evaluation has 13 rules. It is Elasticity, Surface Moisture, Surface Smoothness, Center Hardness, Skin Toughness, Cohesiveness, Denseness, Moisture Release, Cohesiveness of Mass, Lumpiness, Graininess (of Contents), Skin separation, Oiliness and sensory 11 rules evaluation is color, texture, mold, flavor, sweet test, salty, sourness, bitter, and savory taste. 9. Smoked, component, peroxide value, bacteria, color, free amino acid, tenderness, flavor, shrinkage are important values.

• KSBB Journal
• /
• v.10 no.4
• /
• pp.401-405
• /
• 1995

An open pond type photobioreactor for mass cultivation of S. platensis was designed and the growth parameters from different cultivation processes were compared. 0.30(1/day) of specific growth rate and 1.69(g/$\ell$) of maximum cell density were obtained from batch cultivation. In fed-batch cultivation, specific growth rate and maximum cell density were estimated as 0.22(1/day) and 1.75(g/$\ell$), respectively. Maximum biomass productively from continuous cultivation was obtained as 0.44 (g/$\ell$/day). It proves that an outdoors-mass cultivation of S. platensis considering optimal environmental condition is economically feasible. In addition, the biomass productivity was studied in two different mixing systems such as agitation and air sparging methods. The biomass productivity by an agitation method was better than that in an air sparging method.

• Journal of Animal Environmental Science
• /
• v.5 no.3
• /
• pp.189-196
• /
• 1999

Anaerobic digestion is a naturally occuring microbial process involving the decomposition of organic materials such as livestock manure. This study explores the effect of the operating conditions, HRT (Hydraulic Retention Time) and feeding frequency on treatment efficiency for digestion of pig slurry, which has been one of most difficult organic waste for proper treatment in livestock production industry in Korea at the present time. The pilot-scale CSTR of 5 m3 in volume was designed. manufactured, and operated at the temperature of 35$\pm$1$^{\circ}C$. The digester was designed to hydraulically stir for complete mixing and to supply heat from the water bath to maintain mesophilic temperature. The HRT of the digester for Test 1 and Test 2, and Test 3 was set for 17 days and 13 days respectively and pig slurry was fed once a day with 300$\ell$ each for Test 1 and Test 3, while twice with 150$\ell$each for Test 2. Test 2 showed better performance by increase of 4% in VS removal efficiency and 5% in biogas production rate. This is mainly attributed to smaller temperature drop by feeding frequently with half amount, which eventually led to lesser impact on anaerobic mocrobes in the digester. Test 2 maintained optimum pH 7.8 which uplifted the activaton of sulfur-reduction bacteria, alkalinity of around 4,000mg/$\ell$, VA of over 3,000mg/$\ell$ for whole period of experiment. Further research may require to provide the practical operation strategy of anaerobic treatment system for treatment of pig slurry.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.9 no.4
• /
• pp.521-528
• /
• 2021

The high-density fiber composite manufacturing method by the extrusion molding method has the characteristic that continuous production is possible, and the product is molded through a mold forming a specific cross-section. OPC is used as a defect material, an appropriate amount of SiO₂ is supplied for CaO reaction activity, and high density and high strength are expressed through steam and autoclave curing. However, due to the use of organic reinforcing fibers, the flame duration exceeds the regulations during the non-combustible performance test, making it difficult to secure performance. In this study, the product was produced by mixing alkali-resistant organic fiber and fly ash having voids as a binder by replacing the existing polypropylene fiber. appeared to be possible.

• Journal of Korean Society on Water Environment
• /
• v.35 no.3
• /
• pp.234-247
• /
• 2019

In a deep lake and reservoir, thermal stratification is of great importance for characteristics of hydrodynamic mixing of the waterbody, and thereby influencesvertical distribution of dissolved oxygen, substances, nutrients, and the phytoplankton community. The purpose of this study, was to project the effect of a future climate change scenario on water temperature, stratification strength, and thermal stability in the Soyanggang Reservoir in the Han River basin of South Korea, using a suite of mathematical models; SWAT, HEC-ResSim, and CE-QUAL-W2(W2). W2 was calibrated with historical data observed 2005-2015. Using climate data generated by HadGEM2-AO with the RCP 4.5 scenario, SWAT predicted daily reservoir inflow 2016-2070, and HEC-ResSim simulated changes in reservoir discharge and water level, based on inflow and reservoir operation rules. Then, W2 was applied, to predict long-term continuous changes of water temperature, in the reservoir. As a result, the upper layer (5 m below water surface) and lower layer (5 m above bottom) water temperatures, were projected to rise $0.0191^{\circ}C/year$(p<0.05) and $0.008^{\circ}C/year$(p<0.05), respectively, in response to projected atmospheric temperature rise rate of $0.0279^{\circ}C/year$(p<0.05). Additionally, with increase of future temperature, stratification strength of the reservoir is projected to be stronger, and the number of the days when temperature difference of the upper layer and the lower layer becomes greater than $5^{\circ}C$, also increase. Increase of water temperature on the surface of the reservoir, affected seasonal growth rate of the algae community. In particular, the growth rate of cyanobacteria increased in spring, and early summer.

• Journal of radiological science and technology
• /
• v.44 no.3
• /
• pp.247-252
• /
• 2021

As the number of single-person households increases, the consumption of bottled water is increasing. In addition, as the public's interest in radioactivity increases, interest in the field of living radioactivity is also increasing. Since drinking water is an essential element in our daily life, it must be safe from radioactivity. In this study, gamma radiation of drinking spring water was measured and internal exposure dose evaluation was performed to determine its harmfulness. K-40 and uranium-based radioactivity analysis was performed through a high-purity germanium detector, and as a result, drinking water was detected somewhat higher than that of mixing water. Since there is no regulation on the natural radioactivity concentration in Korea, it was compared with the U.S. Environmental Protection Agency Drinking Water Regulations and World Health Organization standard. As a result, there were some items that exceeded standards. Internal exposure was evaluated according to the effective dose formula of ICRP 119. As the result was derived that a maximum of 1.17 mSv per year could be received. This result means that the dose limit for the general public may be exceeded, and it was judged that it is necessary to set an appropriate standard value and present a recommendation value through continuous monitoring in the future.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.25 no.2
• /
• pp.1-11
• /
• 2021

The cavity inside the combustor increases the mixing efficiency of fuel and air by inducing a oscillation of the flow and the recirculation area with a low speed, and enables continuous combustion by maintaining the flame. In this study, the characteristics of the internal flow by change in the shape parameters of the cavity were analyzed through experiments and two-dimensional computational analysis. It was observed that the flow in the supersonic combustor was greatly influenced by various shape parameters of cavity besides L/D. Even with the same L/D, it was confirmed that the flow type varies depending on the depth of the cavity, either open or closed type, and the aft ramp angle of the cavity and the height of the combustor also affect the flow characteristics. As a result, the change in the shape parameters of the cavity had a great influence on the total pressure loss.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.24 no.3
• /
• pp.17-31
• /
• 2022

The purpose of this research is to suggest diverse directions for eco-friendly knit designing through analyzing the characteristics of Stella McCartney's knit designs. The first stage of the research was to explore the characteristics of eco-friendly fashion design based on literature review. The next stage was to categorize the characteristics of eco-friendly design found in Stella McCartney' knit fashion based on the precedent analysis. The data collected showed 274 examples from 40 Stella McCartney collections, including Spring, Resort, Pre-Fall, and Fall Ready-to-wear collections between 2013 and 2022. All information was collected using www.vogue.com. As a result, the characteristics of Stella McCartney's knit design were classified into four directopms: 1) Perpetual Naturalism, 2) Cultural Complexity, 3) Practical Functionality, and 4) Subcultural Reproducibility. The first characteristic, 'Perpetual Naturalism' values the continuous symbiosis between animals and human beings, thereby protecting global environmental value. Stella McCartney's knit design continuously showed a longing for nature's beauty through fashion design, which allowed people to enjoy the meaning of symbiosis between human beings and animals. Second, 'Cultural Complexity' is the characteristic that appears in Stella McCartney's knit fashion design when collaborating with various artists and/or mixing traditional knit motives inspired by traditional cultures and retro moods. Third, 'Practical Functionality' is the design characterisitic that allows items to be worn for a long time as it is comfortable, simple, and practical. Stella McCartney's knit designs pursue easy-to-wear designs that are comfortable and have practical designs with simple details. Lastly, 'Subcultural Reproducibility' showed in Stella McCartney's knit designs reflect Hippie culture, which pursued a rejection of conventional values, and promoted sustainable energy. This culture peaked in the 1960s and 1970s, when 'Beatles' were mainly working. Additionally, retro styled knit designs inspired by other various music genres from the 1980s and 1990s appeared in this category as well.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.1
• /
• pp.87-92
• /
• 2023

With the continuous development of the speech recognition system, the recognition rate for speech has developed rapidly, but it has a disadvantage in that it cannot accurately recognize the voice due to the noise generated by mixing various voices with the noise in the use environment. In order to increase the vocabulary recognition rate when processing speech with environmental noise, noise must be removed. Even in the existing HMM, CHMM, GMM, and DNN applied with AI models, unexpected noise occurs or quantization noise is basically added to the digital signal. When this happens, the source signal is altered or corrupted, which lowers the recognition rate. To solve this problem, each voice In order to efficiently extract the features of the speech signal for the frame, the MFCC was improved and processed. To remove the noise from the speech signal, the noise removal method using the Gaussian model applied noise deviation estimation was improved and applied. The performance evaluation of the proposed model was processed using a cross-correlation coefficient to evaluate the accuracy of speech. As a result of evaluating the recognition rate of the proposed method, it was confirmed that the difference in the average value of the correlation coefficient was improved by 0.53 dB.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.11 no.4
• /
• pp.552-559
• /
• 2023

The purpose of this study is to evaluate the crack reduction performance of blast furnace slag concrete mixed with expansive and swelling admixtures. As a basic performance test, various ingredients such as blast furnace slag fine powder (BFS), calcium sulfoaluminate (CSA), bentonite, and hydroxypropyl methyl cellulose (HPMC) were used, and the results showed that bentonite showed superior performance compared to HPMC. Afterwards, a MOCK-UP test was conducted to evaluate cracking and drying shrinkage according to the mixing ratio. As a result, when bentonite and a small amount of calcium phosphate were added, drying shrinkage was reduced and cracking was reduced. In particular, a cement mixture consisting of 30 % BFS, 1 % bentonite, and 1 % calcium phosphate showed optimal crack-free performance. It is believed that BFS concrete will contribute to compensating for shrinkage through continuous expansion activity and can be used for field applications.