해상풍력발전과 같은 간헐성 재생에너지원의 급격한 성장은 바다를 횡단하는 장거리의 전기에너지의 변환 필요성을 증가시키고 있다. 넓고 깊은 바다에 걸쳐서 장거리 대용량 전력송전을 위한 해법중의 하나는 HVDC 해저 전력케이블을 사용하는 것이다. 그러나 교류자계가 없는 직류전력 케이블의 다양한 해양조건을 갖는 연속허용전류와 관련한 표준이나 연구가 없다. 본 연구에서는 대표적인 두 종류의 해저케이블 모델과 남해안과 서해안 두 지역의 해양 요건을 가정하여 직류케이블의 연속허용전류를 모의하였다. 모의 결과를 보면 직류케이블의 연속허용전류는 해저 지반 깊이에 기반한 감소 구배 특성을 갖고 있는 것을 확인하였다.
The thermal rating of a conductor are maximum continuous current capacity and short time emergency current capacity. The overload operation for a faults have an effect on a conductor lifetime. Its time duration and overload level are limited to facility conditions of transmission lines. The short time emergency current capacity in KOREA observe the KEPCO's DESIGN RULE 1210, but its rules are not included to concept of an allowable short time duration. This papers are described to the calculation concept of short time emergency current capacity considering a time duration and an overload level. And we suggested a operation grouping and its maximum conductor temperature considering facility conditions - conductor lifetime, stability of connection points, conductor height above ground and clearance, in the operating and new T/L.
Inner support regions of continuous steel and concrete composite bridge decks, transverse crackings are easely developed by tensile forces due to live loads and primary and secondary effects of concrete shrinkage. Since these cracks have an influence on the durability of bridge decks, crack width should be controlled within allowable limit values. Although crack width is a function of steel stress, bar diameter, bar spacing, etc, the current code for the amount of longitudinal reinforcements provides only one value of 2 percent of the concrete area. In order to investigate cracking bahaviors of composite girders with the variation of the longitudinal steel ratios, negative flexural tests are conducted on five composite girders and crack width and crack spacing are compared to ACI Code and Eurocode. Based on the test results, it is discussed the suitability of the current code for the longitudinal steel ratio.
한국 남해의 연안역(진해만에서 부산연안)에 있어서 효율적인 수질관리를 위해서, 3차원 생태-유체역학 모델을 적용하여 하계 수질을 예측하고, 목표 수질회복을 위한 오염부하 삭감량을 산정하였다. 현재의 오염부하량 조건하에서 연안해역의 수질(화학적 산소요구량과 영양염류 농도 등)은 설정된 해양환경수질기준을 초과하였고, 또한 부영양화 상태에 있기 때문에 유입하는 오염부하량의 저감이 필요하였다. 이러한 배경하에서, 모델이 적용되어 보정과 검증과정을 통해 연구해역의 유동장과 수질 분포를 유사하게 모의하였다. 시나리오 분석결과, 진해만 해역은 $Chl-{\alpha}\;10{\mu}g\;1^{-1}$와 $COD\;3\;mg\;1^{-1}$ 이하를 동시에 만족하기 위해서는 육상 점오염원으로부터 90% 정도의 오염물질 저감뿐만 아니라, 장기간 오염물질의 유입으로 인한 베이스 농도 자체가 높아서 이를 저감하기 위한 퇴적물로부터 용출되는 질소와 인도 약 70% 정도 삭감해야 하는 것으로 나타났다. 낙동강 하구해역은 $Chl-{\alpha}\;10{\mu}g\;1^{-1}$와 $COD\;2\;mg\;1^{-1}$ 이하를 만족하기 위해서는 낙동강 자체의 유입부하량을 약 80% 정도 저감해야 하며, 낙동강 하구해역을 제외한 부산 연안역은 $Chl-{\alpha}\;10{\mu}g\;1^{-1}$와 $COD\;1\;mg\;1^{-1}$ 이하를 만족하기 위해서는 유입부하의 70% 정도의 삭감이 이루어져야 하는 것으로 예측되었다. 연구해역의 수질이 공간적으로 차이가 있으나 대체적으로 상당히 오염된 상황이라 이러한 삭감량은 매우 커서 현실적으로 단기간에 달성하기는 어려울 것이다. 그러므로 장기적인 관점에서 지속적인 노력 즉, 해역으로 유입하는 미처리된 오염물질 차단, 수처리시설의 확충과 제거 능력 향상 및 오염된 퇴적물 정화 등이 필요하다.
연속경간 강합성 플레이트 거더 및 박스 거더 단면을 현 도로교설계기준의 허용응력설계법(ASD)과 AASHTO-LRFD 설계기준에 근거하여 최근 교량설계핵심기술연구단을 중심으로 제안된 하중저항계수설계법으로 설계하였다. 두 방법으로 설계된 강거더 단면의 강재량과 구조성능을 분석하였으며, 휨파괴에 대한 신뢰도해석을 수행하고 신뢰도지수를 비교 및 분석하였다. ASD법으로 설계 시에는 현 도로교설계기준에 규정된 DB-24 및 DL-24 설계활하중을, LRFD법으로 설계 시에는 최근 국내 통행차량 측정결과 통계에 근거하여 제안된 설계활하중을 적용하였다. 3경간 연속교의 경간비를 4:5:4로 가정하고 중앙부 최대경간장은 30~80 m를 고려하였다. 두 방법으로 설계된 강합성거더 단면의 휨파괴에 대한 신뢰도해석은 국내에서 생산된 16,000여 구조용 강재 표본의 항복강도 통계적 특성이 반영된 휨저항강도의 통계를 이용하여 수행하였다.
건축물이 고층이 될 수록 고강도 강재의 사용요구가 증대된다. 그러나 고강도 강재는 일반 강재와는 전혀 다른 기계적 특성을 갖고 있다. 고강도 강재를 건축구조물에 적용하기 위해서는 비탄성 영역에서의 거동이 일반 강재와 동등한가를 확인해야 한다. 본 연구에서는 SM570TMC 강재로 제작된 박스형 및 H형 단면을 갖는 기둥의 국부좌굴강도를 평가하기 위해서 중심압축실험을 세장비를 변수로 수행하였다. 단주압축 실험결과 판폭두께비의 제한치를 만족하는 기둥부재의 최대내력은 국부좌굴에 의해 결정되며, 판폭두께비를 만족시키지 못하는 경우에는 최대내력에 도달하기 전에 국부좌굴이 발생되었으나 급격한 내력저하는 발생되지 않았다. 장주압축 실험결과 SM570TMC 강재는 허용응력도 설계법과 한계상태 설계법에서 정하고 있는 설계기준을 만족하였다.
In this study, bending test was performed on the real-scale, built-up beam test model fabricated by the $CO_2$ arc spot welding to evaluate the applicability of the welding method to the production of the stiffened plate in car-carrying ship. The built-up beam models which were fixed at both ends in longitudinal direction or simply supported to the rigid foundation, depending on the restraint condition of the corresponding car decks considered, were subjected to simulated design vehicle loads or concentrated point loads. During the test, the central deflection and the longitudinal bending stresses were measured from several points on the longitudinal flange face to predict the section properties of the built-up beams. The longitudinal bending stress on each spot weld were also measured to calculate the average horizontal shear force subjected to spot welds. Test results revealed that the shear strength of spot welds with their current weld nugget size and welding pitch was adequate enough to withstand the horizontal shear forces under the design vehicle loads. Although the built-up beam fabricated by the arc spot welding was a discontinuous beam, its mechanical behavior was well explained by the continuous beam theory using the effective breadth of plate. Based on test results, the criterion for the size of spot weld of which the average shear stress might meet the allowable stress requirement of AWS Code could be established.
수산자원의 남획, 기후변화 및 어업종별 경쟁 조업 등으로 어업생산량은 지속적으로 감소하고 있다. 이러한 문제점을 개선하고자 개별어종에 대해 연간 어획량을 설정하여, 그 한도 내에서만 어획을 허용하는 수산자원 관리제도인 TAC(총허용어획량 제도)를 제정하였다. TAC 제도의 일환으로 육상 조사원이 위판장 어종의 체장, 체고를 측정하여 무게를 산출하여 TAC 소진량을 산출한다. 하지만 육상 조사원의 숙련도에 따라 취득 데이터의 정확도가 상이하고 노동 집약적 업무로 인해 지속가능 하지 못하다. 이러한 문제점을 개선하고자 본 논문에서는 물제와의 거리를 측정할 수 있는 스마트 패드의 카메라를 이용하여 TAC 관리 여덟 어종의 체장, 체고를 측정하고 무게를 산출하고 자동화하는 어종 인식 및 체장 측정 시스템을 제안하고자 한다. 이를 통해 현행 노동 집약적 업무의 스마트화와 데이터 누락을 최소화하여 TAC 제도 확립을 기대할 수 있다.
For the improvement of air quality in the metropolitan area, Korea has enforced the air pollutant emission cap regulation from the 1st of July, 2007, and the companies that intend to install a new or an enlarged facility in the metropolitan area will be restricted. However, the current regulation on permission does not describe a standard of judgement distinctly. In this study, therefore, a method of permission on the installation of a new or an enlarged facility was developed by supplementing the law in force based on the foreign cases. To develop a specific permit regulation and procedure, the developed nations' cases such as US, Canada, EU were reviewed thoroughly. Also, an appropriate method was suggested to apply domestically for a new or an enlarged facility permit within the regulations of the metropolitan special law. The method consists of first, calculating the possible permit quantity from the difference between an estimated annual emission cap and the annual emission provided by the implementation plan in each region. Second, permitting a new or an enlarged facility construction within the difference of the emission between the regional emission cap and the implementation plan in 2014. Third, distributing emissions allowable to each performance year based on the regional emission cap and the implementation plan in 2014. Fourth, making use of the emission difference between the implementation plan and the performance result in each year. Considering the general domestic conditions, the convenience of the permit authority and permitted companies, the most reasonable method was to use the fourth. To enforce the suggested permit method in a more flexible way, parts of the related regulations need to be revised and continuous research and analysis on the results from the implemented system and on foreign cases is necessary to develop this method a suitable system for domestic conditions and to settle the air pollutant emission cap system.
현대의 산업자본주의는 근로의 제공과 임금의 수령이라는 관계가 사회를 규율하는 중요한 원리로 자리 잡고 있다. 근로계약에 따라 자신의 노동력에 대한 처분권을 사용자에게 맡기고 제공받는 임금은 직접적인 보상이 되고 있으며, 적절한 휴식의 보장으로 인간다운 삶의 보장과 재생산을 할 수 있어야 한다. 자유계약에 의한 근로관계의 구축은 근로자 보호에 문제점을 나타내고 있으며, 이에 따라 근로자에 대한 최소한의 권리로 근로시간의 최대치를 정하고 최소휴식의 기준을 설정·부여하고 있다. 근로시간의 단축은 근로자의 삶의 질이라는 측면에서 매우 중요하지만 효율적인 기업활동에 있어서도 중요한 문제이다. 우리나라는 2020년 기준 연간 근로시간이 1,908시간으로 장시간 근로를 하고 있으며, UN산하 자문기구인 지속가능발전해법네트워크(SDSN)가 조사한 행복지수에서 OECD 37개국 중에서 하위 3번째로 나타나고 있다. 이에 따라 근로시간 단축의 필요성은 인정되어, 2018년부터 1주의 최대 근로시간이 52시간으로 제한하고 있다. 이러한 상황에서 기업의 부가가치 창출력을 유지하고, 근로자의 다양한 니즈에 부응하기 위한 방안으로 법적으로 다양한 근로시간의 예외를 두고 있으며, 우리나라 근로기준법은 3개월 이내의 탄력적 근로시간제와 3개월을 초과하는 탄력적 근로시간제, 선택적 근로시간제와 근로시간의 연장을 허용하는 연장근로의 제한을 두어 이를 허용하고 있다. 하지만 2021년 개정된 탄력적 근로시간제를 적용하는 것과 최근 논의되고 있는 정산 단위기간의 확대에 대한 논의에서 탄력적 근로시간제의 문제점이 있어 이에 대한 개선이 필요하다. 따라서 본 논문은 탄력적 근로시간제의 문제점과 이에 때한 개선방안을 살펴보고자 한다. 탄력적 근로시간제는 미리정한 기준에 따라 특정일 또는 특정주에 법정근로시간을 초과하더라도 근로기준법에서 정하고 있는 근로시간에 위배되는 것이 아님과 동시에 초과한 연장근로에 대한 가산임금을 지급하지 않아도 되는 제도로 주로 계절별 시기별 업무량 편차가 심한 제조업, 판매서비스업, 연속사업이나 장기간 조업을 위한 전기·가스·수도, 운수업 등에 있어 교대근무형태로 유용하게 활용되고 있으며, 운용에 따라 보다 짧은 근무일 설정을 통한 휴일 확대 등 근로시간 단축의 방편으로 활용되기도 한다. 하지만 정산 단위기간을 확대할 경우 근로자가 수령할 수 있는 가산임금을 수령하지 못하게 되어 근로자에게 불리하다. 따라서 첫째, 현재 논의되고 있는 정산 단위기간 확대를 하려면 현행 기준에서 확대되는 기간에 대하여 추가임금 지급을 하도록 하여야 한다. 둘째, 탄력적 근로시간제의 개별근로자에 대한 적용을 개선하여 근로자대표와의 서면합의에 있어 개별근로자와 충분한 협의를 하도록 하는 조치가 필요하고, 셋째, 정산 단위기간 동안 연장 근로의 허용시간을 명확히 하여야 하며, 넷째, 1일 최대근로시간이 정해지지 않고 있어 근로시간의 한도를 최대 근로시간으로 제한하거나 연속휴식에 대한 적용이 필요하며, 추가적으로 근로자대표의 서면합의가 탄력적 근로시간제의 적용에 있어 중요한 문제이므로 근로자대표의 대표성을 확보하여야 할 것이다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.