• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.03a
• /
• pp.676-679
• /
• 2008

Numerical simulations of fluid injection into particulate materials were conducted to observe cavity initiation and propagation using distinct element method. After generation of initial particles and wall elements, confining stress was applied by servo-control method. The fluid scheme solves the continuity and Navior-Stokes equations numerically, then derives pressure and velocity vectors for fixed grid by considering the existence of particles within the fluid cell. Fluid was injected as 7-step into the assembly in the x-direction from the inlet located at the center of the left boundary under confining stress condition, 0.1MPa and 0.5MPa, respectively. For each simulation, movement of particles, flow rate, fluid velocity, pressure history, wall stress including cavity initiation and propagation by interaction of flulid-paricles were analyzed.

• The KIPS Transactions:PartB
• /
• v.8B no.5
• /
• pp.493-500
• /
• 2001

Video scene segmentation is fundamental role for content based video analysis. In this paper, we propose a new region based video scene segmentation method using continuity test for each object region which is segmented by the watershed algorithm for all frames in video data. For this purpose, we first classify video data segments into classes that are the dynamic and static sections according to the object movement rate by comparing the spatial and shape similarity of each region. And then, try to segment each sections by grouping each sections by comparing the neighbor section sections by comparing the neighbor section similarity. Because, this method uses the region which represented on object as a similarity measure, it can segment video scenes efficiently without undesirable fault alarms by illumination and partial changes.

• Journal of Mechanical Science and Technology
• /
• v.16 no.3
• /
• pp.386-394
• /
• 2002

The present work is aimed at investigating an unusual variation in flow and performance characteristics of a small propeller fan at low flow rates. A performance test of the fan showed dual performance characteristics, i.e., radial type characteristics at low flow rates and axial type at high flow rates. Dual performance characteristics of the fan are numerically investigated using viscous flow calculations. The Finite Volume Method is used to solve the continuity and Navier-Stokes equations in the flow domain around a fan. The performance parameters and the circumferentially averaged velocity components obtained from the calculations are compared with the experimental results. Numerical values of the performance parameters show good agreement with the measured values. The calculation simulates the steep variations of performance parameters at low flow rates and shows the difference in the flow structure between high and low flow rates. At a low flow coefficient of $\Phi$=0.2, the flow enters the fan in an axial direction and is discharged radially outward at its tip, which is much like the flow characteristics of a centrifugal fan. The centrifugal effect at low flow rates makes a significant difference in performance characteristics of the fan. As the inlet flow rate increases, flow around the fan changes into the mixed type at $\Phi$=0.24 and the axial discharge at $\Phi$=0.4.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.8
• /
• pp.1950-1963
• /
• 1995

A modification of the approximate-factorization method is made to accelerate the convergency rate and to take sufficiently large Courant number without loss of accuracy. And a stable implicit finite-difference scheme for solving the incompressible Navier-Stokes equations employed above modified method is developed. In the present implicit scheme, the volume fluxes with contravariant velocity components and the pressure formulation in curvilinear coordinates is adopted. In order to satisfy the continuity condition completely and to remove spurious errors for the pressure, the Navier-Stokes equations are solved by a modified SMAC scheme using a staggered gird. The upstream-difference scheme such as the QUICK scheme is also employed to the right hand side. The implicit scheme is unconditionally stable and satisfies a diagonally dominant condition for scalar diagonal linear systems of implicit operator on the left hand side. Numerical results for some test calculations of the two-dimensional flow in a square cavity and over a backward-facing step are obtained using both usual approximate-factorization method and the modified one, and compared with each other. It is shown that the present scheme allows a sufficiently large Courant number of O(10$^{2}$) and reduces the computing time.

• Journal of Hydrogen and New Energy
• /
• v.26 no.4
• /
• pp.386-392
• /
• 2015

Flow characteristics inside a 10 inch ball valve have been analyzed using three-dimensional numerical analysis and experiments. Continuity and three-dimensional Reynolds-averaged Navier-Stokes equations have been used as governing equations for the numerical analysis. The numerical model has been constructed through the grid dependency test and validation with the results of experiments to ensure reliability and numerical effectiveness. The shear stress transport (SST) model has been used as the turbulence closure. The experimental test-rig has been constructed to measure pressure, temperature and flow rate along the pipeline. Some valve opening angles have been tested to evaluate the flow characteristics inside the ball valve and pipeline. The results show that the rapid pressure variations is observed while the valve opening angle decreases, which caused by flow separation at the downstream of the ball valve.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.6 no.2
• /
• pp.93-101
• /
• 1986

The behavior of a plane buoyant jet discharged vertically upward into a stagnant uniform environment is analyzed by continuity, momentum transport equation by numerical scheme. The governing equations are solved by finite difference method employing stream function and vorticity transport and Prandtl's turbulent model. Results for centerline velocities and temperatures, temperature distribution and flow pattern in receiving environment due to buoyant jet in the range of discharge densimetric Froude number of 4 to 32 show good agreement with published data. Spreading rate and dispersion ratio, which are required in integral type analysis of whole range of buoyant jet and have not been obtained yet, are derived in terms of discharge densimetric Froude number and vertical distance from source.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.6
• /
• pp.2992-2998
• /
• 2013

The future mobile communication system can support not only voice but also multimedia applications such as data, image and video. It requires greater resources than the voice-oriented mobile system. We propose user and sub-channel priority based resource allocation for mobile multimedia services in the OFDMA systems. Our method is able to guarantee QoS continuity of realtime services and carry the maximum number of non-realtime subscriber. Simulation is focused on total throughput and blocking rate. The simulation results show that our proposed method provides a better performance than the conventional method.

• Water Engineering Research
• /
• v.2 no.3
• /
• pp.179-185
• /
• 2001

The time consuming and expensive nature of experimental research on scouring processes caused by flowing water makes it attractive to develop numerical tools for the predication of the interaction of the fluid flow and the movable bed. In this paper the numerical simulation of scour by a wall jet is presented. The flow is assumed to be two-dimensional, and the alluvium is cohesionless. The solution process, repeated at each time step, involves simulation of a turbulent wall jet flow, solution of the convection-diffusion of sand concentration, and prediction of the bed deformation. For simulation of the jet flow, the governing equations for momentum, mass balance and turbulent parameters are solved by the finite volume method. The SIMPLE scheme with momentum interpolation is used for pressure correction. The convection-diffusion equation is solved for sediment concentration. A boundary condition for concentration at the bed, which takes into account the effect of bed-load, is implemented. The time rate of deposition and scour at the bed is obtained by solving the continuity equation for sediment. The shape and position of the scour hole and deposition of the bed material downstream of the hole appear realistic.

• Research in Community and Public Health Nursing
• /
• v.16 no.4
• /
• pp.467-477
• /
• 2005

Purpose: This study was to identify adolescents' smoking behavior and the status and need of smoking prevention education for adolescents. Method: The subjects were 375 students selected through convenient sampling from three middle schools and three high schools in Jeonbuk. Data were collected through a questionnaire survey and analyzed using SPSS 10.1. Result: The smoking rate was 20.8% and 83.7% the students experienced smoking prevention education. Students were educated by a special instructor (39.8%) or a health teacher (26.8%). Among the teaching methods, lecture was 69.4%, but some students (30.7%) wanted anti-smoking school. Among the students, 85.0% answered they want smoking prevention education and 46.7% said that it should be covered in regular curriculum. Conclusion: High interest and continuity are emphasized for the success of smoking prevention education. In addition, various teaching methods need to be developed including anti-smoking school, lectures, counselling and long term education program. Moreover, smoking prevention education programs need to be covered in regular curriculum.

• Journal of Environmental Science International
• /
• v.24 no.4
• /
• pp.505-514
• /
• 2015

The grid-based water balance of watershed scale was assessed in the mountainous area of Pyosun catchment in Jeju Island after analyzing precipitation, evapotranspiration, and runoff from January 2008 to December 2013. The existing results of direct runoff, evapotranspirtion, and groundwater recharge comparing to precipitation were presented 22.0%, 25.6%, and 52.4%, respectively, in Pyosun catchment. However, this study indicated each component shows 14.5%, 24.2%, and 61.0%, respectively, in the mountainous area of Pyosun catchment. Therefore, groundwater recharge rate in the mountainous area appears higher than 10% comparing to the overall catchment. It would be analyzed that the amount of direct runoff is relatively small. Moreover, this difference could be generated because of the spatial discontinuities in the process of estimating the total amount of precipitation in the mountainous area. Therefore, the grid-based spatial analysis to maximize the spatial continuity would be useful for providing a more reasonable result when the total amount of water resources are evaluated in mountainous areas in the future.