• Journal of Microbiology and Biotechnology
• /
• v.25 no.1
• /
• pp.26-32
• /
• 2015

Four types of straw, namely, soybean, wheat, corn, and rice, were investigated for use in lactic acid production. These straws were mainly composed of cellulose, hemicellulose, and lignin. After pretreatment with ammonia, the cellulose content increased, whereas the hemicellulose and lignin contents decreased. Analytical results also showed that the liquid enzymatic hydrolysates were primarily composed of glucose, xylose, and cellobiose. Preliminary experiments showed that a higher lactic acid concentration could be obtained from the wheat and soybean straw. However, soybean straw was chosen as the substrate for lactic acid production owing to its high protein content. The maximum lactic acid yield (0.8 g/g) and lactic acid productivity (0.61 g/(l/h)) were obtained with an initial reducing sugar concentration of 35 g/l at 30℃ when using Lactobacillus casei (10% inoculum) for a 42 h fermentation period. Thus, the experimental results demonstrated the feasibility of using a soybean straw enzymatic hydrolysate as a substrate for lactic acid production.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.47 no.4
• /
• pp.21-29
• /
• 2015

In this study, the feasibility of utilizing wood chips from pitch pine (Pinus rigida) was evaluated for bioethanol production by an organosolv pretreatment and enzymatic saccharification. When wood chips from pitch wood were pretreated with 75% (v/v) ethanol and 1.7% sulfuric acid as a catalyst at H-factor 2000, average pulp yield was 43.3%, which pretreated wood fibers showed higher glucan (55.8%) and lower lignin (12.2%) contents than untreated control (43.9% glucan and 27.8% lignin). After enzymatic saccharification, the organosolv pulps with 56.2% delignification rate reached above 97% conversion rate of cellulose to glucose. These results indicated that increasing the delignification rate causes micro pores on the surface of organosolv pulps resulting in improved the accessibility of enzyme onto the substrate. Moreover, it was in agreement with the SEM examination of wood fibers.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.06a
• /
• pp.485-488
• /
• 2006

In order to investigate the possibility of waste mushroom logs as biomass resource chemical and physical characteristics of normal woods and waste mushroom logs such as crystallinity value, energy consumption, total sugar yield after hydrolysis chemical compounds and molecular weight distribution after acid hydrolysis, were examined. In the results, crystallinity of waste mushroom logs which were three year passed after the inoculation was decreased drastically from 49% to 33% during the cultivation. Lignin contents as chemical compounds of normal woods and waste mushroom logs were 21.07% and 18.78%, respectively. By the results of measurement of energy consumption, the size reduction of normal woods required a significantly higher energy than that of waste mushroom logs. In the hydrolysis, total sugar yield by enzyme and acid hydrolysis were high in waste mushroom logs(53% 57.5%) than in normal woods(42.9%, 47.17%). According to the molecular weight distribution using GPC, low molecular weight compounds were distributed in waste mushroom logs. Based on these results, waste mushroom logs have enough potential as material for developing alternative energy because of easily conversion to sugar by various hydrolysis methods and requirement of low energy consumption during size reduction.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.47 no.5
• /
• pp.85-90
• /
• 2015

To use the African tulip tree (Spathodea campanulata) as raw material for chemical pulping, soda and soda-AQ pulping was investigated. In chemical compositional analysis, lignin contents of African tulip (33.1%) was higher than other hardwood such as Yellow poplar (17.5%), Acacia (27.1%), or Eucalyptus (24.2%). Soda or soda-AQ pulping with African tulip tree resulted in yield at 43.4-44.8% with 29.5-34.5 Kappa number, pulping condition with 20-22% active alkali. Kappa number of African tulip tree pulp was quite higher than other tropical hardwood (Eucalyptus or Accacia) with less yield due to higher lignin content in wood. Fiber length and width of pulp from African tulip tree was similar to Accacia pulp and shorter than eucalyptus pulp.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.5
• /
• pp.693-701
• /
• 2003

In order to evaluate the nutritive value of the forage plants in South Sulawesi, Indonesia, 266 samples (61 grasses and 65 legumes grown in the dry season, 60 grasses and 80 legumes grown in the rainy season) were collected from the highland and lowland in 1998 to 2000, and were subjected to the determination of chemical composition and digestibility. The least-squares analysis of variance demonstrated that the in vitro dry matter digestibility (IVDMD) of grasses was not significantly affected by season or altitude. On the other hand, the some proximate components and cell wall components were significantly affected by season and altitude including the season${\times}$altitude interaction. For the legumes, the in vitro neutral detergent fiber digestibility (IVNDFD) and cellulose content were significantly affected by season. On the other hand, the ether extract (EE) content was significantly affected by season and altitude. The interaction of the season${\times}$altitude for IVDMD, of the year${\times}$season for some proximate components and of the year${\times}$season and the season${\times}$altitude for some cell wall components were significant. These results indicate that the forages grown at highland in dry season have a relatively high quality. The means of the total digestible nutrient (TDN) content estimated from IVDMD in grasses and in legumes were 50.3% and 57.4%, respectively, and the crude protein contents were 7.7% and 17.6%, respectively. The correlation coefficients between IVDMD and the contents of crude fiber, neutral detergent fiber and acid detergent fiber were relatively high in all of forage plants, suggesting that these components would provide an accurate prediction of digestibility or TDN content. A close relationship between IVNDFD and lignin content indicates that the lignin would be the most accurate predictor of cell wall digestibility.

• Journal of the Korean Wood Science and Technology
• /
• v.47 no.2
• /
• pp.189-199
• /
• 2019

This study addresses the biorefinery feedstock from Pinus densiflora. This raw material is a major tree species in the Republic of Korea; it is renewable, has cost-effective, and is readily available. In this study, steam explosion of P. densiflora was performed in a reactor at $225^{\circ}C$ and with 1 to 13 min reaction times with or without previous water impregnation. The combined severity factor (Ro), which is an expression relating the reaction temperature and reaction time used in the steam explosion treatment, ranged from 3.68 to 4.79. The influence of both impregnation and steam explosion conditions were investigated by examining color variations, chemical composition, and mass balance on the pretreated solids. The results showed that steam-exploded P. densiflora that was not impregnated with water exhibited significantly darker color (chroma 28.8-41.4) than water-impregnated and steam-exploded P. densiflora (chroma 18.8-37.3). The increased ${\alpha}$-cellulose and lignin contents were detected as the severity factor increased. Furthermore, the ${\alpha}$-cellulose and lignin contents in the non-impregnated/steam-exploded P. densiflora were higher than those in the water-impregnated/steam-exploded P. densiflora. However, the decreased holocellulose content was detected as the severity factor increased. In mass balance, the holocellulose yield from water-impregnated/steam-exploded P. densiflora was higher than that from the non-impregnated P. densiflora.

• Korean Journal of Food Science and Technology
• /
• v.22 no.7
• /
• pp.738-742
• /
• 1990

Cell wall components were decreased during maturation and postharvest of persimmon fruits. Contents of pectin and alkali-soluble hemicellulose were increased during maturity, but those of acid-soluble hemicellulose were decreased. Contents of pectin and alkali-soluble hemicellulose were decrease in soft persimmon, whereas acid-soluble hemicellulose was increased remarkably. Cellulose contents were increased during maturation and this tend was notable in soft persimmon. Contents of cell wall polysaccharides per 100g-fresh weight were decreased. Contents of total pectin and insoluble pectin were increased during maturation but decreased in soft persimmon. Content of water-soluble pectin was increased during maturation and postharvest.

• Animal Bioscience
• /
• v.34 no.12
• /
• pp.1940-1950
• /
• 2021

Objective: The objective of this study was to explore the effects of maize straw treated with calcium oxide (CaO) and various moisture, on the composition and molecular structure of the fiber, and gas production by fermentation in an in vitro rumen environment. Methods: The experiment used 4×3 Factorial treatment. Maize straws were treated with 4 concentrations of CaO (0%, 3%, 5%, and 7% of dry straw weight) and 3 moisture contents (40%, 50%, and 60%). Scanning electron microscopy, Fourier transform infrared spectroscopy and X-ray fluorescence spectroscopy were employed to measure the surface texture, secondary molecular structure of carbohydrate, and calcium (Ca) content of the maize straw, respectively. The correlation of secondary molecular structures and fiber components of maize straw were analyzed by CORR procedure of SAS 9.2. In vitro rumen fermentation was performed for 6, 12, 24, 48, and 72 h to measure gas production. Results: Overall, the moisture factor had no obvious effect on the experimental results. Neutral detergent fiber (NDF), acid detergent fiber, acid detergent lignin, hemicellulose and cellulose contents decreased (p<0.05) with increasing concentrations of CaO treatment. Surface and secondary molecular structure of maize straw were affected by various CaO and moisture treatments. NDF had positive correlation (p<0.01) with Cell-H (H, height), Cell-A (A, area), CHO-2-H. Hemicellulose had positive correlation (p<0.01) with Lignin-H, Lignin-A, Cell-H, Cell-A. Ca content of maize straw increased as the concentration of CaO was increased (p<0.01). Gas production was highest in the group treated with 7% CaO. Conclusion: CaO can adhere to the surface of the maize straw, and then improve the digestibility of the maize straw in ruminants by modifying the structure of lignocellulose and facilitating the maize straw for microbial degradation.

• Journal of the Korean Applied Science and Technology
• /
• v.36 no.4
• /
• pp.1243-1252
• /
• 2019

The purpose of this study is to investigate the optimum conditions of biomass pretreatment with potassium hydroxide (KOH) for efficient utilization of cellulose, hemicellulose and lignin from Miscanthus. The optimization of variables was performed by response surface methodology (RSM). The variation ranges of the parameters for the RSM were potassium hydroxide 0.2~0.8 M, reaction temperature 110~190℃ and reaction time 10~90 min. The optimum conditions of alkali pretreatment from Miscanthus were determined as follows: concentration of KOH 0.47 M, reaction temperature 134℃ and reaction time 65 min. At the optimum conditions, the yield of cellulose from the solid fraction after pretreatment was predicted to be 95% by model prediction. Finally, 66.1 ± 1.1% of cellulose were obtained by verification experiment under the optimum conditions. The order contents of solid extraction were hemicellulose 26.4 ± 0.4%, lignin 3.7 ± 0.1% and ash 0.5 ± 0.04%. The yield of ethanol concentration of 96% was obtained using separated saccharification and fermentation.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.33 no.4
• /
• pp.336-342
• /
• 1988

An experiment was carried out to know the effects of paclobutrazol application time on the lodging related traits and yield of a rice variety. Seomjinbyeo, at two nitrogen leveles. Paclobutrazol (3kg 10a of 0.6% G) was applied 43, 33, 23, and 13 days before heading (DBH) and lodging related traits were observed 10, 20, 30, and 40 days after heading (DAH). Earlier applications of paclobutrazol reduced the length of lower internodes and later applications reduced the upper internodes. Culm length tended to decrease as time of paclobutrazol application delayed. Although lodging was not occurred in all plots. lodging index of paclobutrazol treated plots was lower than that of control and increased with maturity, Fresh weight of shoot increased up to 30 DAH and then decreased. Both fresh weight and breaking strength did not show consistent tendency with time of paclobutrazol application and observation. Direct effect of shoot fresh weight contributing to lodging index decreased with maturity. but that of breaking strength and culm length was similar during the ripening stages. Direct effect contributing to lodging index was greater in the order of breaking strength culm length. and fresh weight 40 DAH. Starch content of culm base decreased up to 20 DAH and then increased up to 40 DAH. Cellulose content increased up to 20 DAH, but hemicellulose and lignin did not change significantly during the ripening stages. Starch, cellulose, hemicellulose, and lignin contents of culm base did not correlated with breaking strength and time of paclobutrazol application did not show consistent results. Paclobutrazol applied 13 DBH did not reduce yield of rice. but the earlier applications reduced yield due to a reduced number of spikelets per panicle.