• Korean Journal of Soil Science and Fertilizer
• /
• v.35 no.5
• /
• pp.253-263
• /
• 2002

To test for the effect of applied fertilizer and nutrients on uptake and transport for paddy rice, two paddy field trials were conducted with Dongjinbyeo in degenerated salt paddy field of Jeonbuk series from 1999 to 2000. After experiment, soil acidity, content of organic matter phosphate, silicate, potassium, calcium, and total nitrogen was increased by application of fresh cattle manure(FCM). Content of Nitrogen in soil layer leached inorganic nitrogen $NO_3$ was higher that that of $NH_4$ and was high in treatment of FCM. Content of $PO_4$ was higher in FCM than other treatments. But content of potassium was in high control. During the growth of rice plant, the amount of water consumption was 477mm. The amount of supplied nitrogen was high in treatment of no nitrogen(NN), 20% reduced application of LCU(LCU-20%), and no fertilizer. In case of phosphate, the supplied amount was more than the consumed amount with the exception of treatment "no phosphate(NP) and no fertilizer(NF)". In case of potassium, the consumed amount was more than the supplied amount in all treatments. The amount of applied nitrogen in the nutrient infiltrated water was high in treatment soil test(ST), C+FCM+Si(Silicate) and the ratio of recovered nitrogen was high in 20% reduced application of LCU. The amount of applied phosphate in the nutrient infiltrated water was high in FCM and that of applied potassium was high in 20% reduced application of LCU. Nitrogen use efficiency of paddy rice was high in 20% reduced application of LCU and use efficiency of phosphate and potassium was high in C+Si(Silicate). Grain yield of rice was high in order of 20% reduced application of LCU>C+Si=C+FCM+Si>C+FCM.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.10a
• /
• pp.643-645
• /
• 2010

The Internet-based multimedia services such as IPTV is being expanded with the development of technology to support the convergence of broadcasting and telecommunications technology for the control seems to be growing larger. Especially for the real-time TV broadcast multicast control technology to support the authentication and resource control, in addition to the technology services that enhance the value of technology for a variety of services in both directions seems to be developed. And, Internet-based transmission system transmit the video content for the video content delivery using RTP(Real Time Transport Protocol). Standardization body, IETF(Internet Engineering Task Force) within the RTP, according to a variety of audio and video formats only transmission format(RTP Payload Format) Establish a separate standard and scalable video content "RTP Payload Format for SVC(Switched Virtual Connection) Video" the standardization is currently processing. In this paper we are improving the quality of broadcasting and telecommunication systems, so that the upper layer by the application can react adaptively to the existing MPEG2-TS and RTP who are provided by a variety of content applied to a variety of devices consumers ETE(End- to-End) QoS(Quality of Service) for enhance the system who was designed and implemented.

• Journal of the Korean Ceramic Society
• /
• v.42 no.2 s.273
• /
• pp.88-93
• /
• 2005

Ti-AI-Si-N coating layers were deposited on WC-Co substrates by a hybrid system of arc ion plating and sputtering techniques. The coatings were prepared with different Si contents to investigate the effect of Si content on their mechanical properties and microstructures. The dry sliding wear experiments were conducted on Ti-AI-Si-N coated WC-Co discs at constant load, 3N, and sliding speed, 0.1 m/s with two different counterpart materials such as steel ball and zirconia ball using a conventional ball-on-disc sliding wear apparatus. In the case of steel ball, the friction coefficient of Ti-AI-Si-N coating layers became lower than that of Ti-AI­N coating layers. The friction coefficient decreased with increasing of Si content due to adhesive wear behavior between coating layer and steel ball. On the contrary, in the case of zirconia ball, the friction coefficient increased with increasing of Si content, indicating that abrasive wear behavior was more dominant when the coating layers slid against zirconia ball.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.12
• /
• pp.737-746
• /
• 2019

Most landslides in the country are shallow failures triggered by intense rainfall. Many researchers have revealed the possibility of predicting shallow failure through the volumetric water content (VWC). This study examined how to determine shallow failure using the gradient characteristics of the volumetric water content. For this, flume experiments were conducted using weathered granite soil. To confirm the saturation state of the surface layer under a rainfall intensity of 30 and 50mm/hr, VWC sensors were installed at depths of 10 and 20 cm on the upper, middle and lower slope. The test results showed that a shallow failure determination using VWC could be applied limitedly according to the slope degree. In addition, the effective cumulative rainfall due to the rainfall infiltration velocity is considered the main factor for the failure time. The failure prediction using the gradient of the VWC depends on the installation location and depth of the sensor. According to the experimental data, the measured value at 20 cm below the slope was most effective. Therefore, an analysis method of VWC and the method of selecting the installation location confirmed through this study can provide important data for presenting the measurement criteria using VWC in the future.

• Korean Journal of Food Science and Technology
• /
• v.13 no.1
• /
• pp.30-36
• /
• 1981

Neutral lipids of the total lipid extracted from 4 representative varieties of barley grown in Korea and their corresponding malt were studied. Total lipids of barley and malt were solvent extracted with chloroform:methanol:water (1.0 : 1.0 : 0.9, v/v), The total lipids were fractionated into neutral and polar lipids by silicic acid column chromatography, and neutral lipids fraction was separated by thin layer chromatography and quantitated by TLC scanner. The fatty acid compositions was determined by gas liquid chromatography. The average content of total lipid in the 4 barleys and their malts were 3.3 and 2.9%, and average of neutral lipids content in the barley and malt lipids were 73.8 and 68.5%, respectively. Among the neutral lipids, triglycerides and free fatty acids were the major components, and triglycerides content decreased and free fatty acids content increased during malting. Sterol esters, free sterols, 1,3-and 1,2-diglycerides were the minor components of the neutral lipids, and contents of those components showed increasing tendency during malting. The major fatty acid composition of the total lipids were linoleic, palmitic and oleic acids, and in general, the malts had lower amounts of unsautrated fatty acids and high amounts of saturated fatty acids. Fatty acid composition of neutral lipids was of almost the same pattern as that of the total lipids.

• Journal of the Korean Geosynthetics Society
• /
• v.16 no.4
• /
• pp.211-219
• /
• 2017

The spray-applied waterproofing membrane is installed on shotcrete or concrete surface to make impermeable layer with 3-5 mm thick for the purpose of waterproofing. This study aims to determine the internal structure of a spray-applied waterproofing membrane including pores by using X-ray CT technique. Before obtaining X-ray images of the membrane specimens, a waterproof performance test was performed on the membrane specimens with a water pressure of 500 kPa for 28 days. Results show that the movement of moisture is made through micropores. This is based on the fact that the large pores inside the membrane are not saturated and the degrees of saturation of the micropores are high. X-ray image is effective for determining the pore size distribution and whether the membrane with pores contains the water However, it is necessary to pay attention to the determination of water content, since water content may vary depending on the threshold value of X-ray image analysis applied to calculate the water content.

• Journal of the Korea Society of Computer and Information
• /
• v.20 no.6
• /
• pp.59-76
• /
• 2015

Recent wide spread of embedded devices and technology growth of broadband communication has led to rapid increase in the volume of created and managed data. As a result, data centers have to increase the storage capacity cost-effectively to store the created data. Data deduplication is one way to save the storage space by removing redundant data. This work propose IO extent based deduplication schemes called CORE-Dedup that exploits content-preserving access locality. We acquire IO traces from block device layer in virtual machine host, and compare the deduplication performance of chunking method between the fixed size and IO extent based. At multiple workload of 10 user's compile in virtual machine environment, the result shows that 4 KB fixed size chunking and IO extent based chunking use chunk index 14500 and 1700, respectively. The deduplication rate account for 60.4% and 57.6% on fixed size and IO extent chunking, respectively.

• International Journal of Oral Biology
• /
• v.42 no.4
• /
• pp.155-161
• /
• 2017

Teeth and bones are highly mineralized tissues containing inorganic minerals such as calcium phosphate, and a growing number of evidences show that their mineral content is associated with many diseases. Although the quantification of mineral contents by micro-computed tomography(micro- CT) has been used in diagnosis and evaluation for treating bone diseases, its application for teeth diseases has not been well established. In this study, we attempted to estimate a usefulness of a high-resolution micro-CT in analysis of human teeth. The teeth were scanned by using the Skyscan 1172 micro-CT. In order to measure tooth mineral content, beam hardening effect of the machine was corrected with a radiopaque iodine-containing substance, iodoacetamide. Under the maximum resolution of $6.6{\mu}m$, X-ray densities in teeth and hydroxyapatite standards were obtained with Hounsfield unit (HU), and they were then converted to an absolute mineral concentration by a CT Analyzer software. In enamel layer of cusp area, the mean mineral concentration was about $2.14mg/mm^3$ and there was a constant mineral concentration gradient from the enamel surface to the dentinoenamel junction. In the dentin of middle 1/3 of tooth, the mean mineral concentration was approximately $1.27mg/mm^3$ and there was a constant mineral concentration gradient from the outer of root to the pulp side, ranging from 1.3 to $1.06mg/mm^3$. In decay region of dentin, the mineral content was gradually decreased from the intact inner side to the decayed surface. These results suggest that high-resolution micro-CT can be as a useful tool for non-invasive measurement of mineral concentration in teeth.

• Elastomers and Composites
• /
• v.36 no.2
• /
• pp.111-120
• /
• 2001

Mechanical properties and their adhesion behavior with zinc- and brass-plated steel cords of natural rubber/acrylonitrile-butadiene blend compounds were investigated as a function of blend ratio. The Mooney viscosity and stress relaxation time were found to be lowered with increasing NBR content. Tensile modulus generally increased with increasing NBR content. Tensile stress at break stayed constant up to about 40 phr and showed minimum at $50{\sim}60 phr$, and thereafter increased with increasing NBR content. Strain at break decreased linearly below 50 phr, and above the level it showed nearly constant value. Based on the abrupt drops in elastic modulus and tan ${\delta}$ peak, the glass transition temperature of NR and NBR were found to be -55 and $-10^{\circ}C$, respectively. In the case of NR/NBR blend compounds, two distinct transition points were observed and each transition position was not affected by NBR level indicating an incompatible nature of NR/NBR blend system. The pullout force and rubber coverage decreased to the level of about 40% to that of pure m compound, when the 50 phr of NR was replaced by NBR. However, the pure NBR compound showed the comparable adhesion performance with NR(${\sim}90%$). The sulfur concentration was found to become lower with the increased NBR content at the adhesion interface based on the Auger spectrometer results, representing a lack of adhesion layer formation, and this was explained for a possible cause of low adhesion performance with adding NBR.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.28 no.4
• /
• pp.66-76
• /
• 1986

This study was attempted to investigate the effects of delayed compaction on the unconfined compressive strengh and dry density of Soil-cement mixtures. Soil-cement construction is a time-consuming procedure. Time-delay is known as a detrimental factor to lower the quality of soil-cement layer. A laboratory test was performed using coarse and fine weathered granite soils. The soils were mixed with 7% cement at optimum moisture content and excess moisture content in part. Socondary additives such as lime, gypsum-plaster, flyash and sugar were tried to counteract the detri-mental effect of delayed compaction. The specimens were compacted by Harvard Miniature Compaction Apparatus at 0,1,2,4,6 hors after mixing. Two kinds of compactive efforts(9 kgf and 18 kgf tamper) were applied. The results were summarized as follows: 1.With the increase of time delay, the decrease rate of dry density of the specimen compacted by 9 kgf tamper was steeper than that of the specimen compacted by 18kgf tamper. In the same manner, soil-B had steeper decreasing rate of dry density than soil-A. 2.Based on the results of delayed compaction tests, the dry density and unconfined compressive sterngth were rapidly decreased in the early 2 hours delay, while those were slowly decreased during the time delay of 2 to 6 hours. 3.The dry density and unconfined compressive strength were increased by addition of 3% excess water to the optimum moisture content during the time delay of 2 to 6 hours. 4.Without time delay in compaction, the dry densities of soil-A were increased by adding secondary additives such as lime, gypsum-plaster, flyash and sugar, on the other hand, those of soil-B were decreased except for the case of sugar. 5.The use of secondary additives like lime, gypsum-plaster, flyash and sugar could reduce the decrease of unconfined compressive strength due to delayed compaction. Among them, lime was the most effective. 6.From the above mentioned results, several recommendations could be suggested in order to compensate for losses of unconfined compressive strenght and densit v due to delayed compaction. They are a) to use coarse-grained granite soil rather than fined-grained one, b) to add about 3% excess compaction moisture content, c) to increase compactive effort to a certain degree, and d) to use secondary additives like line gypsum-plaster, flyash, and sugar in proper quantity depending on the soil types.