• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.11B
• /
• pp.1245-1253
• /
• 2009

Since 2000, the demand for multimedia content consumption has been continuously increasing. The research and standardization for the mobile broadcast service has been done to deliver multimedia contents to the huge number of users with the minimum cost. A few commercial services started after the related standards were released. We call this mobile broadcast service the 1st generation service. Now, many experts are researching and developing the technologies for 3Screens(TV, PC, and Mobile) Services that an user can enjoy multimedia contents at every place with the various networks and devices. To enable this service, two main technical areas exist. The first is a core network technology that can support the various access network and the second is a common application layer technology. To resolve these technical areas, we propose IMS(IP Multimedia Subsystem) based OMA BCAST(Open Mobile Alliance Mobile Broadcast Service Enabler Suite) as the technical solution for 3 Screen Services in the paper. In addition, we propose application layer multicast that is enable to implement IMS based OMA BCAST to the existing network with the minimum cost. Finally, we show how we can save the implementation cost of IMS based OMA BCAST with the simulation results.

• Journal of Conservation Science
• /
• v.12 no.1 s.15
• /
• pp.15-25
• /
• 2003

It is well known that the salt in stoneworks impact on damage of stone by various methods. Various kind of salt is detected in high content in the black surface layer of stone monuments and it is required about origin and roles of salts on blackening to considerate. In this study have been investigated the characteristics of salt in the black crust of sandstone and limestone which used in historical monuments in Berlin, Germany. Salt was analyzed for cation by Atomic Absorption and Atomic Emission Spectroscopy and for anion by ion Chromatograph. The representative ions are $Ca^{2+}\;and\;SO_4^{-2}$ in all samples and the most obvious combinations was proved in calcium sulfate by statistical methods. Because gypsum was detected by X-ray diffraction analyses in the black crusts, this calcium sulfate was confirmed by 2 hydrate type. The probable origin of Ca is air particle in atmosphere around sandstone and calcite in mother rock in limestone, and that of S is polluted air and mortar which used as conservation works.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.20 no.4
• /
• pp.355-359
• /
• 1987

Texture and mineralogy of different microlayers of deep-sea manganese nodules are investigted to reveal the environmental changes of nodules during a nodule formation. Basically a nodule can have three types (A, B and C) of microlayer. Some nodules show only one or two types of microlayer. The classification is based primarily on the texture. The surface torture of type A is coarsely porous globular microstructure whereas type B and C are intermediate to finely porous textures. The type A is characterized by its highest Mn content $(30.6\%)$ and relatively well-crystallized todorokite as veil as the rapid growth rate. Smectite and biogenic silica (radiolaria) are also easily observed in the type A layer. It appears that the hydrothermal activity is one of the favorable mechanism of formation for the type A layer. The hydrothermal solution is possibly supplied from nearby fracture zone and spreading center.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.16 no.6
• /
• pp.93-107
• /
• 2013

Construction of an artificial wetland for the growth of Sphagnum palustre with emergent macrophytes (Phragmites australis, Typha angustifolia, and Zizania latifolia) was firstly tried and the growth of those plant components according to various environmental combinations has been monitored for three years. Above-ground dry weight of Z. latifolia ($1,500g/m^2$) was higher than T. angustifolia ($900g/m^2$) and P. australis ($500g/m^2$) under most environmental conditions. In overall, planted emergent macrophytes seemed to prefer polishing sand without moss peat as a substrate and relatively deep water-depth condition (20cm) rather than shallow water-depth (5cm). Despite of high calcium content in inflow water (> 15ppm) into the constructed wetland, S. palustre populations have survived in most experimental plots during the monitoring period. Substrate layer including moss peat with high surface-area might play a role as an ion-filter. After three years, relatively thicker litter-layer in Z. latifolia plots due to vigorous growth appeared to heavily depress S. palustre by physical compressing and complete shading processes. Most of all, for the continuous growth of S. palustre, physio-chemical characteristics of water and substrate must be carefully managed. In addition, companion emergent species should be also cautiously selected not to depress S. palustre by much litter production. We suggest P. australis and T. angustifolia as companion species rather than Z. latifolia.

• Korean Journal of Poultry Science
• /
• v.26 no.4
• /
• pp.217-236
• /
• 1999

Among polyunsaturated fatty acids (PURAs) targeted for manipulation in animal tissues (poultry eggs and meat), omega-3 PUFAs(n-3 PUFAs) are discussed in this review. 3 or 5% dietary menhaden oil (MO) supplemented layer diets was reported to increase docosahexaenoic acid (DHA) and eicosapentaenoic acid (EPA) contents in the egg. MO at 1.5% also increased the deposition of up to 180mg total omega-3 fatty acids / yolk. Utilization of 5% ground flax seed (FS) resulted in similar total omega-3 fatty acid (FA) deposition as 1.5% MO. However, the basic feed formulations used in the Canadian feed industry usually include 10 to 20% FS in the egg laying diets. Recently several studies reported that addition of tocopherols in layer diets increased the tocopherol content more in the egg than any other tissue. One of reports said that 3.5% dietary oil with added tocopherols resulted in increasing tocopherol deposition and FA composition of the egg and other tissues. In the poultry meat, redfish meal (RM;4, 8, 12, 15 and 30% of diet) or redfish oil (RO;2.1 or 4.2% of diet) added to the practical corn-wheat-soybean based diets resulted in an increase in omega-3 FA and docosapentaenoic acid (DPA) contents in broiler meat lipids. Linseed oil (LO;1.0, 2.5, and 5.0% of broiler diet) supplemented in broiler diets also resulted in omega-3 FA and the ratio of omega-6 being significantly higher in poultry meat lipid than MO. Concern about fish flavor resulted in research about fish oil (FO) supplementation in broiler diets. Without the use of antioxidants, no more than 1.5% FO should be fed to broilers due to unacceptable orders from the chicken carcasses. One recent research project found that over 50mg/kg of vitamin E was required for maintaining the stability of unsaturated lipids in the meat. In regards to 'fishy'or 'crabby'taint in the eggs and poultry meat, poultry products remained acceptable when dietary fish oils were stabilized with antioxidants.

• Journal of Welding and Joining
• /
• v.28 no.4
• /
• pp.18-25
• /
• 2010

Super-duplex stainless steels (SDSS) have a good balance of mechanical property and corrosion resistance when they consist of approximately equal amount of austenite and ferrite. The SDSS needs to avoid the detrimental phases such as sigma(${\sigma}$), chi(${\chi}$), secondary austenite(${\gamma}2$), chromium carbide & nitride and to maintain the ratio of ferrite & austenite phase as well known. However, the effects of the subsequent weld thermal cycle were seldom experimentally studied on the micro-structural variation of weldment & pitting corrosion property. Therefore, the present study investigated the effect of the subsequent thermal cycle on the change of weld microstructure and pitting corrosion property at $40^{\circ}C$. The thermal history of root side was measured experimentally and the change of microstructure of weld root & the weight loss by pitting corrosion test were observed as a function of the thermal cycle of each weld layer. The ferrite contents of root weld were reduced with the subsequent weld thermal cycles. The pitting corrosion was occurred in the weld root region in case of the all pitted specimen & in the middle weld layer in some cases. And the weight loss by pitting corrosion was increased in proportional to the time exposed at high temperature of the root weld and also by the decrease of ferrite content. The subsequent weld thermal cycles destroy the phase balance of ferrite & austenite at the root weld. Conclusively, It is thought that as the more subsequent welds were added, the more the phase balance of ferrite & austenite was deviated from equality, therefore the pitting corrosion property was deteriorated by galvanic effect of the two phases and the increase of 2nd phases & grain boundary energy.

• Journal of the Korean Vacuum Society
• /
• v.8 no.1
• /
• pp.70-74
• /
• 1999

MgO-CaO protective layers with various composition were prepared by electron beam evaporation to improve the characteristics of conventional pure MgO thin films as a protective layer for AC-PDP. The maximum deposition rate of pure MgO was 1025 $\AA$/min and decreased with increasing [(CaO/(MgO+CaO)] ratio of evaporation starting materials. From XRD analyses, a trend of peak shift to the lower 2$\theta$ angle side was shown as CaO content increased and it stoped when the concentration of CaO was 0.13, which corresponds to the maximum solubility of CaO in MgO. The optimum composition of the protective thin films was Mg 47.1 at%, Ca 1.3 at%, O 51.6 at%, and firing voltage, memory margin and deposition rate of the film with this composition was 176 V, 0.5 and 515 $\AA$/min, respectively.

• Applied Chemistry for Engineering
• /
• v.8 no.6
• /
• pp.927-933
• /
• 1997

The effects of carbon black on the electrodes performance and on the structure of the catalyst layer in Raney nickel hydrogen electrodes for alkaline fuel cells were investigated by using electrochemical and nitrogen adsorption methods. The optimum content of carbon black in the catalyst layer of Raney nickel hydrogen electrode was 2wt%. The limiting current density was increased by the addition of carbon black due to the enlargement of gas-liquid interface area. The rate determining step at the limiting current density was supposed to be a step where hydrogen dissolves at gas-liquid interfaces.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.15 no.4
• /
• pp.136-145
• /
• 2011

For a massive project related to building national industrial complexes on a soft ground applied to PVD after dredging and hydraulic fill, laboratory tests were carried out using undisturbed sample taken from various depth. Piezocone penetration and dissipation tests were carried out to assess horizontal coefficient of consolidation and initial stress in field. The ground consists of upper dredged fill and lower original clay layer having both similar marine clays. It should be, however, considered as multi-layered soft ground having different initial void ratio, initial water content, initial effective stress, and permeability and compressibility with directions. To assess initial stress of those soft layers in which have different stress history related to consolidation, CPTu test results, especially excess pore water pressure, were analyzed. It allows to find out distribution of excess pore water pressure and initial stress inner original clay layer.

• Journal of the Korean Ceramic Society
• /
• v.20 no.3
• /
• pp.211-216
• /
• 1983

This work aims at characterizing silicon grains and its compacts. In order to remove iron silicon grains were washed with 5N hydrochloride at 60-7$0^{\circ}C$ for 170 hrs, and then followed the chemical analysis by atomic absorption spectrophotometer X-ray diffraction analysis SEM observation and specific surface area determination by B. E. T. Mixtures of graded silicon particles with two or three different sizes were made into packings by mechanical vibration. The mixtures were used to make compacts with 10 mm in diameter and 70mm in length by isostatically pressing at 1, 208 kg/$cm^2$ (20 kpsi) and 4, 255kg/$cm^2$ (60 kpsi) respectively. Bulk densities of packings and compacts were measured. A slip made of magnesium nitrate solution and fine silicon particles was spray-dried and then decomposed at 30$0^{\circ}C$ for the purpose of coating the uniform layer of magnesium oxide on the surface of particles. The results obtained are as follows: (1) About two thirds of iron content could be removed from silicon by washing silicon powders with hydrochloride. (2) Uniform layer of magnesium oxide on the surface of silicon could be prepared by spray-drying suspension and by decomposing it. (3) B. E. T. specific surface area of fine silicon particles was 2, 826.753$m^3$/kg. (4) In the binary system with two sizes of 40-53$\mu\textrm{m}$ particles and <10$\mu\textrm{m}$ particles the maximum bulk density of packing was 55% of theoretical value and that of compacts made at the pressure of 4, 255 kg./$cm^2$ (60 kpsi) was 73% of theoretical value. (5) In the ternary system with three sizes the maximum bulk density of packing was 1.43 g/$cm^3$and that of compacts was 1.80g/$cm^3$which is equivalent to 77.6% of theoretical value. The composition of the closest compact was consisted of 50% of 40-53$\mu\textrm{m}$ particles 20% of 10-30$\mu\textrm{m}$ particles and 30% of <10$\mu\textrm{m}$ parti-cles.