• Journal of Plant Biology
• /
• v.25 no.2
• /
• pp.83-99
• /
• 1982

In this study, thirty-two stands in Kwangnung forest located in the central part of Korea were preferentially selected. In each stand, all stems for trees and shrubs were recorded by species and their girths were measured down to 5cm. In addition, several enviromental factors such as field soil pH, field soil moisture, soil compressibility, depth of soil, thickness of litter layer, elevation and basal area were measured. Three soil cores were sampled and various physical and chemcial properties was determined. The vegetational data were subjected to three kinds of multivariate ordination(PO, PCA, RA). The results suggested that Kwangnung forest was consisted of three forest types: coniferous, mixed and broad leaved forest communities. The relation between the stand scores of ordination and several environmental factors were investigated in terms of correlation analysis in order to examine the relationships between the vegetation and certain environmental factors. As a result of this analysis, the amount of sand content in A1 horizon decreased frm the coniferous to broad leaved forest, while maximum field capacity, pore space, exchangeable cations, loss on ignition, soil pH nad the amount of total nitrogen had a tendancy to increase significantly. However, easily soluble phosphorus appeared to have little to do with the forest types. The result of species ordination of centered-standardized PCA suggested that the major successional pathway in Kwangnung forest was; Pinus densifloralongrightarrowQuercus mongolica, Q. serrata, Q. alienalongrightarrowCarpinus laxifloralongrightarrowC. erosa in sequence. This trend is in good agreement with the past studies. In three kinds of ordination (centered PCA, centered-standardized PCA and RA) based on nineteen species and twenty-five stands, the total variances accounted for the first three axes were 77%, 46% and 63% respectively. The estimated beta diversity in Kwangnung forest assumed as a coenocline, was 1.5~1.8 HC. Increasing the effect of the sampling errors on ordination perfermance, this low heterogeneity seems to cause the poor concentration of the total variance. The results from the four kinds of ordination were in good agreement with each other, especially between PO, centered-standardized PCA and RA appeared robust. It seems to be worthy of applying multivariate method for analyzing other forest communities in Korea.

• Journal of the Korean GEO-environmental Society
• /
• v.20 no.5
• /
• pp.39-46
• /
• 2019

Most of the soil used for reclamation is marine clay generated from dredging construction.The soft ground made of dredged clay has high water content and high compressibility, so the bearing capacity of the ground is very weak and it is difficult to enter the ground improvement equipment. Therefore, surface hardening treatment method is used to enter equipment prior to full-scale civil engineering work, and stabilizer is mainly used for cement series. Cement-based stabilizers have the advantage of improving the ground in a short period of time and have excellent economic efficiency, but they are disadvantageous in that they cause environmental problems due to leaching of heavy metals such as hexavalent chromium. In this study, environmental effects evaluation of dredged clay mixed with normal portland cement and environmentally friendly stabilizer was evaluated, and uniaxial compressive strength test and indoor model test were conducted to confirm the bearing capacity characteristics of the solidified layer.

• Journal of the Korea Convergence Society
• /
• v.10 no.3
• /
• pp.395-400
• /
• 2019

The Web environment of the frontend domain is increasingly competitive to preempt the new standard of presentation layer. N-Screen, a service that enables users to seamlessly use one content in various devices in Korea, is competing for market preemption by recognizing it as a core service of the future. In the cloud computing, N-screen is a typical service type. However, most of the frontend research required for groupware in enterprise environments has been limited to responsive web design for the web and native apps for mobile. Gradually, the need for MVC design patterns is increasingly widening in enterprise environments to overcome the cultural differences of companies and to support one source multi-use strategy supporting multiple devices and development productivity. Therefore, in this study, we will analyze and design JPetStore with hybrid application design based on Spring MVC, e-government standard framework environment of next generation web standard, and provide reference model of frontend hybrid apps design in future enterprise environment.

• Transactions of Materials Processing
• /
• v.28 no.1
• /
• pp.21-26
• /
• 2019

Direct Laser Melting (DLM) of $Ti-xTiH_2$ (mixing ratio x = 2, 5, 10 wt.%) blended powder is characterized by producing porous titanium parts. When a high energy laser is irradiated on a $Ti-TiH_2$ blended powder, hydrogen gas ($H_2$) is produced by the accompanying decomposition of the $TiH_2$ powder, and acts as a pore-forming and activator. The hydrogen gas trapped in a rapidly solidified molten pool, which generates porosity in the deposited layer. In this study, the effects of a $TiH_2$ mixing ratio and the associated processing parameters on the development of a porous titanium were investigated. It was determined that as the content of $TiH_2$ increases, the resulting porosity density also increases, due to the increase of $H_2$ produced by $TiH_2$. Also, porosity increases as the scan speed increases. As fast solidified melting pools do not provide enough time for $H_2$ to escape, the faster the scan speed, the more the resulting $H_2$ is captured by the process. The results of this study show that the mixing ratio (x) and laser machining parameters can be adjusted to actively generate and control the porosity of the DLM parts.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.23 no.4
• /
• pp.92-97
• /
• 2019

A study was conducted to improve the adhesion of propellant, liner,and insulation. Insulation was shown to be more advantageous in improving the adhesion when a barrier coat was applied compared to a bare insulation layer. It was confirmed that the adhesion strength between the insulation and the propellant improves as the thickness of the liner coating increases. The liner was cured for 24 h. If the liner is cured for a long time, it will adversely affect adhesion. Adhesion is also improved when a bonding agent is applied. As the bonding agent content increases, the adhesion improves. There is a change in the adhesive strength depending on the type of bonding agent used. HX-868 shows slightly more improved adhesion than HX-752.

• Nuclear Engineering and Technology
• /
• v.53 no.1
• /
• pp.282-293
• /
• 2021

This paper examines gamma-ray shielding properties of SBC-Bx glass system with the chemical composition of 40SiO₂-10B₂O₃-xBaO-(45-x)CaO- yZnO- zMgO (where x = 0, 10, 20, 30, and 35 mol% and y = z = 6 mol%). Mass attenuation coefficient (µ/ρ) which is an essential parameter to study gamma-ray shielding properties was obtained in the photon energy range of 0.015-15 MeV using PHITS Monte Carlo code for the proposed glasses. The obtained results were compared with those calculated by WinXCOM program. Both the values of PHITS code and WinXCOM program were observed in very good agreement. The (µ/ρ values were then used to derive mean free path (MFP), electron density (N_eff), effective atomic number (Z_eff), and half value layer (HVL) for all the glasses involved. Additionally, G-P method was employed to estimate exposure buildup factor (EBF) for each glass in the energy range of 0.015-15 MeV up to penetration depths of 40 mfp. The results reveal that gamma-ray shielding effectiveness of the SBC-Bx glasses evolves with increasing BaO content in the glass sample. Such that SBC-B35 glass has superior shielding capacity against gamma-rays among the studied glasses. Gamma-ray shielding properties of SBC-B35 glass were compared with different conventional shielding materials, commercial glasses, and newly developed HMO glasse. Therefore, the investigated glasses have potential uses in gamma shielding applications.

• Journal of Applied Biological Chemistry
• /
• v.63 no.4
• /
• pp.365-373
• /
• 2020

We previously reported the potential of Senna tora L. seeds fermented by Lactobacillus casei (FSL) as a laxative agent in a loperamide-induced constipation rat model. Here, we examine the mechanism of action of FSL and its bioactive compound, revealed herein, on loperamide-induced constipation Sprague Dawley rat model. We identified the compound aurantio-obtusin (AO) using HPLC quantitative analysis. Rats were randomly assigned to six experimental groups (eight rats each)-normal and constipated groups (loperamide, FSL [100, 300, 500 mg/kg], and AO [1 mg/kg]). The FSL and AO-treated group showed an increase in the frequency, amount, and water content of feces in the constipated rat. Moreover, FSL and AO increased the intestinal transit speed in the constipated rat. Histological analysis revealed that FSL and AO recovered the intestinal mucus, the number of goblet cells, as well as thickness of the mucosa layer and muscle. Furthermore, the protein levels of the muscarinic acetylcholine receptor M3, which is involved in intestine contraction, were recovered in the FSL and AO-treated group. Its downstream signaling pathway (p-protein kinase C) was recovered by FSL and AO treatment. In conclusion, fermentation of S. tora L. seeds increases AO, which improves intestinal function, indicating that FSL is effective for treating constipation.

• Korean Journal of Metals and Materials
• /
• v.47 no.12
• /
• pp.842-851
• /
• 2009

The long-term reliability of Sn-0.3wt%Ag-0.7wt%Cu solder joints was evaluated and compared with Sn-3.0wt%Ag-0.5wt%Cu under thermal shock conditions. Test vehicles were prepared to use Sn-0.3Ag-0.7Cu and Sn-3.0Ag-0.5Cu solder alloys. To compare the shear strength of the solder joints, 0603, 1005, 1608, 2012, 3216 and 4232 multi-layer ceramic chip capacitors were used. A reflow soldering process was utilized in the preparation of the test vehicles involving a FR-4 material-based printed circuit board (PCB). To compare the shear strength degradation following the thermal shock cycles, a thermal shock test was conducted up to 2,000 cycles at temperatures ranging from $-40^{\circ}C$ to $85^{\circ}C$, with a dwell time of 30 min at each temperature. The shear strength of the solder joints of the chip capacitors was measured at every 500 cycles in each case. The intermetallic compounds (IMCs) of the solder joint interfaces werealso analyzed by scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDS). The results showed that the reliability of Sn-0.3Ag-0.7Cu solder joints was very close to that of Sn-3.0Ag-0.5Cu. Consequently, it was confirmed that Sn-0.3Ag-0.7Cu solder alloy with a low silver content can be replaced with Sn-3.0Ag-0.5Cu.

• Korean Journal of Metals and Materials
• /
• v.46 no.3
• /
• pp.182-188
• /
• 2008

Carbon nanotubes(CNTs) have outstanding mechanical, thermal, and electrical properties. Thus, by placing nanotubes into appropriate matrix, it is postulated that the resulting composites will have enhanced properties. Cold spray can produce thick metal-based composite coatings with very high density, low oxygen content, and phase purity, which leads to excellent physical properties. In this study, we applied cold spray coating process for the consolidation of Cu/CNT composite powder. The precursor powder mixture, in which CNTs were filled into copper particles, was prepared to improve the distribution of the CNT in copper matrix. Pure copper coating was also conducted by cold spraying as a reference. Annealing heat treatment was applied to the coating to examine its effect on the properties of the composite coating. The hardness of Cu/CNT composite coating represented similar value to that of pure copper coating. It was importantly found that the electrical conductivity of the Cu/CNT composite coating significantly increased from 53% for the standard condition to almost 55% in the optimized condition, taking annealed ($500^{\circ}C/1hr$.) copper coating as a reference (100%). The thermal conductivity of Cu/CNT composite coating layer was higher than that of pure Cu coating. It was also found that the electrical and thermal conductivities of Cu/CNT composite could be improved through annealing heat treatment. The microstructural evolution of Cu/CNT coating was also investigated and related to the macroscopic properties.

• Journal of Powder Materials
• /
• v.28 no.1
• /
• pp.31-37
• /
• 2021

This study explores reducing the oxygen content of a commercial Ti-48Al-2Cr-2Nb powder to less than 400 ppm by deoxidation in the solid state (DOSS) using Ca vapor, and investigates the effect of Ca vapor on the surface chemical state. As the deoxidation temperature increases, the oxygen concentration of the Ti-48Al-2Cr-2Nb powder decreases, achieving a low value of 745 ppm at 1100℃. When the deoxidation time is increased to 2 h, the oxygen concentration decreases to 320ppm at 1100℃, and the oxygen reduction rate is approximately 78% compared to that of the raw material. The deoxidized Ti-48Al-2Cr-2nb powder maintains a spherical shape, but the surface shape changes slightly owing to the reaction of Ca and Al. The oxidation state of Ti and Al on the surface of the Ti-48Al-2Cr-2Nb powder corresponds to a mixture of TiO2 and Al2O3. As a result, the peaks of metallic Ti and Ti suboxide intensify as TiO2 and Al2O3 in the surface oxide layer are reduced by Ca vapor deposition.