• Food Science and Preservation
• /
• v.10 no.4
• /
• pp.527-533
• /
• 2003

This study was performed for increasing the consumption and developing the function of pumpkin(Cucurbita moschata DUCH.) seed. The changes of the contents of general chemical compositions, fatty acids, amino acids, ascorbic acid and ${\beta}$-carotene during sprouting were analyzed. Also, the bitter taste, which was produced during sprouting, were purified by using thin layer chromatography and preparative high pressure liquid chromatography. The purified bitter compound was identified by mass spectrum and nuclear magnetic resonance($^1$H '||'&'||' $\^$13/C-NMR). Weight of pumpkin seed sprout was increased to 348.4% and the length of stem was dramatically increased at 8 days. In each head and stem parts of the pumpkin seed sprout, the contents of protein and lipid were decreased, however, the contents of fiber, ash and soluble inorganic nitrogen were increased. The fatty acids of the pumpkin seed sprout were mainly represented as linoleic acid, oleic acid, palmitic acid and stearic acid. During sprouting, palmitic acid was gradually increased, reversely, linoleic acid was gradually decreased. The general amino acids of head part in the pumpkin seed sprout grown at 23$^{\circ}C$ during 8 days were orderly more contained glycine, alanine, arginine, cystein and proline. Those of free amino acids were orderly more contained arginine, threonine, alanine and glutamine. The contents of L-ascorbic acid and ${\beta}$-camtene of the pumpkin seed sprout were gradually increased with increasing sprouting days. The bitter taste material of head part of the pumpkin seed sprout was detected at Rf value 0.72 on silicagel TLC plate and separuted as one peak by HPLC. The chemical structure of the puified bitter compound was identified as a cucurbitacin glycoside by MS and NMR. The content of bitter compound at 8 days was contained 42.2 mg per 1kg sprout head.

• Korean Journal of Environment and Ecology
• /
• v.25 no.4
• /
• pp.490-497
• /
• 2011

This study was carried out to identify environmental factor to influence fruiting of Vicia chosenensis populations distributed in Hongcheon-gun region, Korea. The populations was dominated by Quercus mongolica in the tree layer, and Lindera obtusiloba and Lespedeza maximowiczii in the shrub layer. Syneilesis palmata(21%) was abundant around reproductive state points and vegetative state points, and Artemisia stolonifera(13~18%) and Spodiopogon sibiricus(10~11%) show second high frequency in the both points. It was found that the soil moisture content in the Vicia chosenensis population was 20.4~21.9%; 8.6~14.9% for organic matter; 0.3~0.5% for the total N;12.7~16.9 ppm for available phosphorus; 22.5~28.5 $cmol_ckg^{-1}$ for CEC; 5.3~5.5 for soil pH, respectively. The microhabitat of individuals was restricted to areas high in understory light. Especially, reproductive individuals were more likely to be located than vegetative individuals in canopy gaps. Therefore, our results suggest that a proper forest management maintaining canopy gaps is needed for keeping natural Vicia chosenensis population.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.46 no.5
• /
• pp.57-70
• /
• 2009

A CAD design drawing based on vector data that is very important art work in industrial fields has been considered to content that the copyright protection is urgently needed. This paper presents a watermarking scheme based on k-means++ for CAD design drawing. One CAD design drawing consists of several layers and each layer consists of various geometric objects such as LINE, POLYLINE, CIRCLE, ARC, 3DFACE and POLYGON. POLYLINE with LINE, 3DFACE and ARC that are fundamental objects make up the majority in CAD design drawing. Therefore, the proposed scheme selects the target object with high distribution among POLYLINE, 3DFACE and ARC objects in CAD design drawing and then selects layers that include the most target object. Then we cluster the target objects in the selected layers by using k-means++ and embed the watermark into the geometric distribution of each group. The geometric distribution is the normalized length distribution in POLYLINE object, the normalized area distribution in 3DFACE object and the angle distribution in ARC object. Experimental results verified that the proposed scheme has the robustness against file format converting, layer attack as well as various geometric editing provided in CAD editing tools.

• Journal of the Korean Geotechnical Society
• /
• v.36 no.7
• /
• pp.5-14
• /
• 2020

Kansai International Airport (KIX) was opened in September 1994. Although 26 years have passed since the completion of the first island, long-term settlement is still in progress. This settlement occurs in the Pleistocene layer. For it is not easy to determine the permeability of the Pleistocene sand layer because the thickness and the degree of fine content in the horizontal direction are constantly changing. In addition, it is also a difficult to predict the interactive behavior of the ground due to the construction of the second phase island adjacent to it. In order to solve this problem, a two-dimensional finite element analysis considering elasto-viscoplastic was performed to evaluate the long-term deformation, including the interactive behavior of the alternating Pleistocene foundation due to the construction of two adjacent reclaimed islands. In general, two-dimensional analysis can be used when a section can represent the entire sections. However, Kansai Airport is an artificial reclaimed island so two-dimensional analysis cannot solve the problem such as the stress deformation in the corners of the island. Additionally, the structure of the actual sub-ground through physical exploration is non-homogeneity and its thickness is also not constant. Therefore, there are limitations for the two-dimensional analysis to explain the phenomena. That is, three-dimensional analysis is strongly required. Due to these demands, the author extended the existing two-dimensional program capable of elasto-viscoplastic analysis to three-dimensional and completed the verification of the three-dimensional program developed through one-dimensional consolidation analysis. In order to demonstrate the validity of the developed 3D program that has been verified, an analysis is performed under the same analysis conditions as the existing research using a two-dimensional program. The effectiveness of the developed 3D numerical analysis program was demonstrated by comparing the analysis results with the 2D results and actual measurement data.

• Journal of Conservation Science
• /
• v.34 no.1
• /
• pp.11-21
• /
• 2018

The result of the study on the origin and preservation status of the 'Gongju Junghakdong old missionary house', the Registered Cultural Property No. 233, reveals that the building was approved on October 23, 1921, and missionary Alice H. Sharp was living in the building until her retirement from her missionary life of 39 years in Korea in 1939. In order to review internal and external preservation status of the building, condition of wood material, the composition of the window, the damage of the wall, and the leaning of the building were examined. In particular, in the case of window facilities, it is necessary to restore it to the original upper and lower sliding window. As a result of investigation of the preservation status of the external facilities, it is necessary to restore the original shape of the staircase and a deck of the building on south western side and the well. In addition, the results of the non-destructive diagnosis of the ground revealed that the building was built on uneven surface layer of 2-5 m thickness and the boundary between the surface layer and the upper part of the weathered rock is inclined following geomorphology. This phenomenon shows that when the water content of the ground increases in the rainy season, the bearing capacity of the ground is lowered, and there is a possibility of uneven subsidence. Especially, landslides may occur in case of heavy rain. Therefore, it is desirable to install a masonry facility at the southwest boundary of the site, and it is recommended to install a drainage facility to ensure rapid drainage.

• The Korean Journal of Pesticide Science
• /
• v.9 no.4
• /
• pp.330-337
• /
• 2005

This study was investigated to elucidate the pesticide mobility in three different soil textures(Heongseong sandy loam; Chuncheon, loam; Taeback, silty clay loam) and four different gravel contents(0, 20, 40, 60%) of Taebaek soil using soil column. Carbofuran, which ranks the highest water solubility among 7 pesticides(carbendazim, carbofuran, chlorpyrifos, cypermethrin, dimethomorph, diniconazole and endosulfan) was defected over 87% in leachate samples within all soil types from early sampling time. Amount of 5 residual pesticides excluding carbendazim and carbofuran were ordered silty clay loam > loam > sandy loam, indicating pesticide residues are related to percentage of clay contents in soils. Comparing the amount of residual pesticides in soil column(upper, middle and lower layer), 6 pesticides apart from carbofuran were found in the range of $50{\sim}92%$ on the upper layer of silty clay loam and loam. Mobility of pesticides either in soil or leachate samples is dependant on water solubility of pesticide and clay content of soil. The results obtained from four different gravel contents of Tacback soil were similar to the results of three different soil textures. Also it was found that more the gravel contents, faster the flow velocity of leachate water. These results possibly provide an idea to select proper pesticides and to reduce soil and water contamination at alpine and sloped-land.

• Journal of the Korean Wood Science and Technology
• /
• v.41 no.6
• /
• pp.490-496
• /
• 2013

The board using recycled wood waste chip tends to decrease in terms of physical and mechanical properties. The reasons are notably different shape of chips, components of used adhesive and impurity content, which bring the irregular quality and downgrading of board. More over, the board has higher emissivity of formaldehyde than regular board, because recycled chip contains adhesives that were used to make previous products. This low quality of products weakens the price and quality competitiveness, and it led to bringing the issue of problem in Korean board industry. For these reason, in this study, boards using byproducts of plywood were made to evaluate physical and mechanical properties according to manufacturing conditions. As a result, The board was consists of 4~16 mesh chips for core layer and veneer on both face and they were combined using EMDI, and its' bending strength was 57.7 $N/mm^2$ which is 215% higher than that of OSB (26.8 $N/mm^2$). Moreover, the emissivity of formaldehyde was 0.7 ppm, this board seems to substitute OSB for rated sheathing.

• Journal of agriculture & life science
• /
• v.44 no.3
• /
• pp.31-40
• /
• 2010

This study was carried out to offer a basis data for conservation and application of effective management of Camellia japonica stand in Hakdong, Geoje Island. Field survey was conducted at C. japonica stand, mixed stand, Chamaecyparis obtusa plantation, and Pinus thunbergii stand. Importance value of C. japonica at tree layer was highest in C. japonica stand and mixed stand, and that of C. obtusa and P. thunbergii were highest in C. obtusa plantation and P. thunbergii stand, respectively. At subtree layer, C. japonica, Callicarpa dichotoma, Neolitses serices, and Styrax japonica had the highest importance value in C. japonica stand, mixed stand, C. obtusa plantation, and P. thunbergii stand, respectively. The species diversity ranged from 0.121 to 1.589 in C. japonica stand, 0.543 to 1.540 in mixed stand, 0.276 to 1.321 in C. obtusa plantation, and 0.764 to 1.523 in P. thunbergii stand, respectively. Soil pH was 5.72 in C. japonica stand, 5.26 in mixed stand, 5.21 in C. obtusa plantation, and 5.32 in P. thunbergii stand. The content of organic matter and total N were 5.77, 0.48% in C. japonica stand, 4.41, 0.30% in mixed stand, 3.28, 0.33% in C. obtusa plantation, and 5.32, 0.28% in P. thunbergii stand.

• Geophysics and Geophysical Exploration
• /
• v.8 no.1
• /
• pp.86-91
• /
• 2005

We present the results of electrical resistivity surveys carried out to estimate the seasonal variation of the water table level in a large-scale landslide area of Tertiary geology in Japan. One long profile, trending NE-SW, was established perpendicular to the main regional geology of the region. Three boreholes are located very close to the profile. The profile was surveyed twice, once before snowfall and once after snow had melted. The relationship between resistivity and water saturation of pyroclastic materials was clarified through laboratory tests. We did this in order to estimate the water content of the pyroclastic layer from the observed resistivity distribution in the landslide area. The resistivity of the saturated pyroclastic deposit calculated using an empirical formula was found to be $570{\Omega}.m$. Based on this computed resistivity, the groundwater level was deduced by assuming that the pyroclastic deposits were fully saturated beneath the water table. We show that the estimated water table before snowfall is lower than that inferred after snow has melted, by about 1.1 to 4.7 m. This suggests that the water table in the upper part of the pyroclastic layer in the landslide area fluctuates greatly, compared to the lower part. This seasonal groundwater fluctuation is possibly caused by the infiltration of water into the subsurface after snowmelt.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.49 no.2
• /
• pp.74-88
• /
• 2021

In the present study, the characteristics and changes in the vegetation of Mt. Cheongryang, Inchon, were examined to identify and determine appropriate ways to restore the health of the urban forest and to preserve its vegetation. The vegetation of the community of Quercus mongolica (Mongolian oak) on Mt. Cheongryang appeared to decrease in response to the control of the wilt disease of oak trees. The communities of Sorbus alnifolia (Korean mountain ash) and Styrax japonicus (Snowbell tree) have increased. Pinus rigida (Pitch Pine) had its overall territory decrease, but the current state of the Pinus rigida (Pitch Pine) was estimated to be stable due to its dominance as a tree layer species. In regards to Robinia pseudoacacia (Black Locust), the urbanized species of Sorbus alnifolia (Korean mountain ash), and Styrax japonicus (Snowbell tree), their areas have increased with the appearance of Magnolia obovate (Whiteleaf Japanese Magnolia). The biodiversity of Mt. Cheongryang has decreased by simplifying species in the tree layer and understory species thereof, and the initial success of species in marginal areas has increased. The absence of potential succession was attributed to the termination of ecological succession; thereby, the current vegetation structure was concluded to be remaining as it is for the time being. Soil texture in the mountain primarily consisted of sandy loam or loamy sand; the pH of the soil was in the range 4.26-4.86, rendering a mean pH of 4.59. The content of organic matter (O.M.) appeared having a distributing range of 2.18-9.60%, rendering a mean value of 4.33%. To promote species diversity, several methods are suggested, such as prevention of soil acidification, selecting nationally-grown trees from moist soil or valleys for afforestation, preventing species appearing due to urbanization or excessive growth, protecting the understory vegetation and species with hygropreference, and managing the forest to maintain a multi-layered vegetation structure.