• Journal of Korea Foundry Society
• /
• v.34 no.6
• /
• pp.194-199
• /
• 2014

The effect of $Al_2Ca$ on the oxidation resistance and tensile property of Al-5Mg alloys was investigated. According to the TGA (Thermogravimetric analysis) result at $550^{\circ}C$ after 24hrs, the Al-5Mg alloy showed parabolic behavior with weight gain. On the other hand, there was almost no difference in the weight changes of the $Al_2Ca$ added Al-5Mg alloys during the oxidation. It was thought that the improvement of oxidation resistance in $Al_2Ca$ added Al-5Mg alloys might be due to the formation of a protective oxide layer with CaO and MgO on the surface. The microstructures of the alloys showed grain refinement with an increasing $Al_2Ca$ content. From the tensile test, the yield strength of the alloys were improved with an increasing $Al_2Ca$ content. The 0.07 mass%$Al_2Ca$ added Al-5Mg alloy showed similar elongation and increased strength, simultaneously. It was considered that the addition of $Al_2Ca$, which was superior in the oxidation resistance of Al, reduced the formation of Mg oxides and inclusions during the alloying. This, partly led to the improvement of tensile properties.

• Polymer(Korea)
• /
• v.24 no.6
• /
• pp.820-828
• /
• 2000

In this study, biaxially oriented film process was used to improve barrier property of polypropylene (PP)/ethylene-vinyl alcohol copolymer (EVOH) blends by inducing a laminar morphology of the dispersed phase in the matrix phase. In order to examine the extent of deformation during melt extrusion process, the rheological properties of the resins were measured and the viscosity ratio of the dispersed phase to the continuous phase was determined. The effects of compatibilizer content, draw ratio, and draw temperature on the oxygen permeability and morphology of biaxially drawn blend films were studied. The laminar morphology of the EVOH phase with a larger area of thinner layer induced by biaxial orientation was found to result in a significant increase in oxygen barrier property of PP/EVOH (85/15) blends by about 10 times relative to the pure PP When both PP-g-MAH and ionomer were used as the compatibilizers, there existed an optimum level of compatibilizer content for obtaining improved barrier properties with a well developed laminar structure. In addition, higher draw ratio and draw temperature were found to be more favorable processing conditions in obtaining higher barrier blends.

• Journal of the Korean Electrochemical Society
• /
• v.6 no.4
• /
• pp.236-241
• /
• 2003

Magnetic CoW thin film alloys were electrodeposited from citrate baths to investigate the resulting microstructure and magnetic properties. Deposit tungsten (W) content in the films electrodeposited at $70^{\circ}C$ were independent of current density, while coercivity decreased from hard $(H_{c,//}\~150\;Oe\;and\;H_{c.{\bot}}\;\~240\;Oe)$ to soft magnetic properties $(H_{c,//}\~20\;Oe\;and\;H_{c.{\bot}}\;\~30\;Oe)$ with increasing current densities from $10\;to\;100mA{\cdot}cm^2$, with deposit W content $(\~40\%)$ relatively unaffected by the applied current density. X-ray diffraction analysis indicated that hcp $Co_3W$ phases [(200), (201) and (220) planes] in the CoW films electrodeposited at $70^{\circ}C\;and\;10mA{\cdot}cm^{-2}$ were dominant, whereas amorphous CoW phases with small amount of hcp $Co_3W$ [(002) planes] were dominant with deposition at $70^{\circ}C\;and\;100mA{\cdot}cm^{-2}$. At intermediate current densities $(25\;and\;50mA{\cdot}cm^{-2}),\;hop\;Co_3W$ phases [(200), (002), (201) and (220)] were observed. The average grain size was measured to be 30 nm from Sheller formula. It is suggested that the change of the deposit coercivities in the CoW thin films electrodeposited at $70^{\circ}C$ is attributed to the change of microstructures with varying the current density. Nanostructured $Co_3W/amorphous-CoW$ multilayers were fabricated by alternating current density between 10 and $100 mA{\cdot}cm^{-2}$, varying the individual layer thickness. The magnetic properties of $Co_3W/amorphous-CoW$ multilayers were strongly dependent on the thickness of the alternating hard and soft magnetic thin films. The nanostructured $Co_3W/amorphous-CoW$ multilayers exhibited a shift from low to high coercivities suggesting a strong coupling effect.

• Journal of the Korean Society for Heat Treatment
• /
• v.20 no.2
• /
• pp.65-71
• /
• 2007

Microstructural changes and hardness variations in STS 304 steel have been investigated during the processes of carbide dispersion (CD) carburization; carburization, austenitization, subzero treatment and tempering. The carbon content of the surface layer increased up to maximum 4.0% after carburization, and the content was homogenized with the value of 2.3% to the $95{\mu}m$ from the surface after austenitization. The carbide appeared during CD carburization process was $Cr_7C_3$ type, which was composed network carbides along the austenite grain boundaries, square type carbides in the interior of the grain and fine nano-sized carbides. The fine nano-sized carbides precipitated at the austenitization stage and possibly subzero treatment stage were coarsened after tempering at $200^{\circ}C$, resulting the hardness decrease. The tempered steel without subzero treatment increased hardness with increasing time due to the continuous precipitation of fine carbides during tempering. The nano-sized carbide appeared square type morphology.

• Korean Journal of Food Science and Technology
• /
• v.23 no.2
• /
• pp.241-247
• /
• 1991

The objective of this experiment was to study the effect of dextrin on vacuum frying dried carrots. The concentrations of dextrin solution were 0%, 10%, 20%, 30% and the criteria for quality evaluation were sorption characteristics, rehydration power, color and crispness differences. The sorption characteristics were evaluated by Peleg's equation. Rehydration, color and crispness were determined by rehydration percentage, colorimetry and sensory evaluation, respectively. The dextrin pretreatment of carrot resulted in the reduction of adsorption rate and the equilibrium moisture content of dried carrot at various range of relative humidities, and the adsorption rate of samples pretreated with aqueous dextrin solution at different temperatures($4^{\circ}C,\;20^{\circ}C,\;30^{\circ}C$) were in the following decreasing order : control>10% dextrin>20% dextrin>30% dextrin. As the concentration of dextrin solution and ambient temperature increased, BET monomolecular layer moisture content decreased significantly. In addition, as the concentration of dextrin solution increased, the crispness intensity increased and the color of sample treated with 20% dextrin solution was similar to that of raw carrot.

• Korean journal of food and cookery science
• /
• v.27 no.4
• /
• pp.67-73
• /
• 2011

This study was performed to assess the neuroprotective effects of methanolic extracts from sweet persimmon peel (PPE) against glutamate-induced cytotoxicity in hybridoma N18-RE-105 cells. The neuroprotective effects of PPE in N18-RE-105 cells were measured using the MTT reduction assay, LDH release assay, and phase-contrast microscopy. The results of the MTT reduction assay showed that treating cells with 500 ${\mu}g/ml$ PPE resulted in cell viability of 66.9%. Additionally, the morphological changes and the results of the LDH release assay showed that glutamate-induced damage to nerve cells was strongly inhibited by PPE. GSH content of N18-RE-105 cells was 3.5 ${\mu}M$ compared to that of the control, whereas pretreatment with 500 ${\mu}g/ml$ PPE increased GSH content by 4.7 ${\mu}M$. PPE was fractionated with hexane, and that layer had the highest neuroprotective effects in glutamate-stressed N18-RE-105 cells. In conclusion, our data showed that glutamate potentiated the effects of N18-RE-105 cell death by a mechanism involving oxidative stress. Therefore, PPE may be a potential candidate for prevention and therapy of neurodegenerative diseases.

• Proceedings of the Korea Society of Poultry Science Conference
• /
• 2000.11a
• /
• pp.97-99
• /
• 2000

Considerable beneficial effects on osteoporosis from soy intake in postmenopausal women are being reported (Murkies et al.1998, Arjmandi et al. 1996). Isoflavones(IF), one of phytoestrogenic substances in the soybean, have been suggested for the effect. Our preliminary study showed that even the young chicks fed IF-rich diet tended to have higher bone ash content than those fed IF-poor diet. IF have been reported to decrease bone ash content than those fed IF-poor diet, IF have been reported to decrease bone loss by reducing bone resorption. Soybean meal has been one of the most important protein sources in poultry diets. We assume that the IF intake through dietary soybean meal could give meaningful influences on the birds. This study was carried out to determine effects of dietary IF from soybean sources on bone development in young chicks. Soy protein concentrate (SPC, IF-poor)and an IF concentrate(Phyto-Nutramin) were formulated together with purified-type ingredients to provide three different levels(25, 240 and 480 mg/kg) of total IF. Control diet(240 mg/kg) was prepared with isolated soyprotein(ISP, IF-rich). The diets were fed to 96, 3-day old, layer-type, male chicks, divided into 4 treatments with 3 replications for 3 weeks. Chicks fed the ISP diet had better gain/feed ratios than fed the SPC diets. Birds fed the diets with higher levels of IF tended to show higher values in serum total and ionized Ca% and tibial bone density, length % ash, stiffness and strain. This trend however, appeared less significant at the end of third week. No noticeable differences in sizes of comb and testicle and serum alkaline phosphatase activities were observed among the dietary groups. These results suggest that dietary isoflavones from soybean sources could be associated with chemical composition and physical properties of bone in sizes of comb and testicle and serum alkaline phosphatase activities were observed among the dietary groups. These results suggest that dietary isoflavones from soybean sources could be associated with chemical composition and physical properties of bone in young chicks.

• Korean Journal of Soil Science and Fertilizer
• /
• v.46 no.4
• /
• pp.281-287
• /
• 2013

Due to its high salt content and poor physical properties in reclaimed tidal lands, it is important to ameliorate soil physical properties to improve the efficiency of desalination. The objective of this study was to evaluate the changes of soil properties at Saemangeum reclaimed tidal saline soil with various soil amendments. Field experiment was conducted at Saemangeum reclaimed tidal land in Korea and the dominant soil series was Munpo series (coarse loamy, mixed, nonacid, Mesic, Typic, Fluvaquents). Woodchips, crushed-stone, oyster shell, coal bottom ash, and rice hull were added as soil amendments and mixed into surface soil to improve soil physical properties. There was large variability in soil hardness, but oyster shell treatment was significantly lower soil hardness at surface layer. Soil hardness was not significantly different below 15 cm depth. Infiltration rate was also significantly greater at oyster shell treatment. This may be due to the leaching of Ca ions from oyster shell and improved soil properties. However, there was no statistical significant difference of the soil bulk density, moisture content, and porosity. Improved physical properties increased desalinization rate in soil and retarded the resalinization rate when evapotranspiration rate was high. Although soil salinity was significantly decreased with oyster shell amendment, soil pH was increased that should be made up as a soil amendment. Our results indicated that oyster shell application increased infiltration rate and improved soil hardness, and thus oyster shell could be used to improve soil salinity level at Saemangeum reclaimed tidal saline soil.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.39 no.2
• /
• pp.247-256
• /
• 2015

This study prepared fabric-heating elements of carbon nanofiber composite to characterize morphologies and electrical properties. Carbon nanofiber composite was prepared with 15wt% PVDF-HFP/acetone solution, and 0, 1, 2, 4, 8, and 16wt% carbon nanofiber. Dispersion of solution was conducted with stirring for a week, sonification for 24 hours, and storage for a month, until coating. Carbon nanofiber composite coated fabrics were prepared by knife-edge coating on nylon fabrics with a thickness of 0.1mm. The morphologies of carbon nanofiber composite coated fabrics were measured by FE-SEM. Surface resistance was determined by KS K0555 and worksurface tester. A heating-pad clamping device connected to a variable AC/DC power supply was used for the electric heating characteristics of the samples and multi-layer fabrics. An infrared camera applied voltages to samples while maintaining a certain distance from fabric surfaces. The results of morphologies indicated that the CNF content increased specifically to the visibility and presence of carbon nanofiber. The surface resistance test results revealed that an increased CNF content improved the performance of coated fabrics. The results of electric heating properties, surface temperatures and current of 16wt% carbon nanofiber composite coated fabrics were $80^{\circ}C$ and 0.35A in the application of a 20V current. Carbon nanofiber composite coated fabrics have excellent electrical characteristics as fabric-heating elements.

• Journal of Animal Environmental Science
• /
• v.19 no.1
• /
• pp.39-46
• /
• 2013

This study was carried out to compare the filtration effect of anaerobic digestion waste water by compost filtration bed. Three types of filtration systems were set for filtration test following to composition of bedding materials. Two filtration systems were filled with sawdust, rice-hull and wood-chip. And the other was filled with sawdust and rice-hull. Anaerobic digestion waste water was applied evenly on the surface of the filtration bed with spraying nozzle. The concentration of nitrogen, biochemical oxygen demand (BOD), suspended solids (SS) of anaerobic digestion waste water was decreased by filtration treatment. The total nitrogen content was decreased from 1,313 mg/L to 1,090~1,293 mg/L and BOD concentration was decreased from 529.7 mg/L to 125~162.3 mg/L, respectively. The SS content was decreased from 69~79% by filtration process. In addition, the electrical conductivity (EC) was decreased from 10.22 ds/m to 7.91~8.31 ds/m.