• International Journal of Concrete Structures and Materials
• /
• v.7 no.3
• /
• pp.225-238
• /
• 2013

In this study, a two-layer feed-forward neural network was constructed and applied to determine a mapping associating mix design and testing factors of cement-nano silica (NS)-rice husk ash ternary blended concrete samples with their performance in conductance to the water absorption properties. To generate data for the neural network model (NNM), a total of 174 field cores from 58 different mixes at three ages were tested in the laboratory for each of percentage, velocity and coefficient of water absorption and mix volumetric properties. The significant factors (six items) that affect the permeability properties of ternary blended concrete were identified by experimental studies which were: (1) percentage of cement; (2) content of rice husk ash; (3) percentage of 15 nm of $SiO_2$ particles; (4) content of NS particles with average size of 80 nm; (5) effect of curing medium and (6) curing time. The mentioned significant factors were then used to define the domain of a neural network which was trained based on the Levenberg-Marquardt back propagation algorithm using Matlab software. Excellent agreement was observed between simulation and laboratory data. It is believed that the novel developed NNM with three outputs will be a useful tool in the study of the permeability properties of ternary blended concrete and its maintenance.

• Applied Biological Chemistry
• /
• v.37 no.6
• /
• pp.509-515
• /
• 1994

Using the lipids extracted from Korean yam(Dioscorea) tubers, D. batatas, D. aimadoimo and D. japonica, fractionation and identification of lipid components and their fatty acid compositions were analysed. Lipid contents determined by Folch's method in D. batatas, D. aimadoimo and D. japonica were 11.0 mg/g, 11.4 mg/g and 6.6 mg/g, respectively. Lipids extracted were fractionated into neutral lipid, glycolipid and phospholipid by silicic acid column chromatography. The content of neutral lipid was over about 60% in lipid. Neutral lipid was composed of sterol ester, triglyceride, 1,3-diglyceride, 1,2-diglyceride and monoglyceride. Main constituents of glycolipid were acylsterylglycoside, monogalactosyldiglyceride, sterylglycoside, digalactosyldiglyceride and sulfolipid, and phospholipid contained phosphatidylethanolamine, phosphatidylcholine and phosphatidylinositol. The fatty acids of the total lipid and its three lipid fractions were analyzed by GC. The major fatty acids were palmitic and linoleic acids. Content of the saturated fatty acids was less than that of the unsaturated fatty acids.

• Journal of Microbiology and Biotechnology
• /
• v.27 no.5
• /
• pp.943-946
• /
• 2017

Although the genus Leuconostoc, generally found in various fermented foods, has often been suggested to be a novel probiotic for food fermentation and health promotion, the strains in this genus showed low acid tolerance and low osmotic stress resistance activities, which are required for survival during food fermentation events. Recently, a novel species of Weissella, W. jogaejeotgali $FOL01^T$ (= KCCM 43128 = JCM 30580), was isolated from Korean fermented clams. To determine the genomic features of this new species, its genome was completely sequenced and analyzed. The genome consists of a circular chromosome of 2,114,163 bp of DNA with a G+C content of 38.8%, and the plasmid pFOL01 consists of 35,382 bp of DNA with a G+C content of 39.1%. The genome analysis showed its potential for use in food fermentation and osmotic stress resistance abilities for processing in food industries. In addition, this strain was predicted to have acid tolerance and adhesion to the mucosal layer for survival and colonization in the gut. Subsequent experiments substantiated these abilities, suggesting that W. jogaejeotgali may have probiotic potential and a high survival rate during food fermentation. Therefore, it may be suitable as a novel probiotic strain for various applications in food industries.

• Polymer(Korea)
• /
• v.34 no.5
• /
• pp.424-429
• /
• 2010

The hybrid composites of aliphatic polyester-silica were prepared via a sol-gel reaction and their potential application using as a buffer coating layer in the thermoelectric device were investigated. When aliphatic polyesters were thermally treated at a high temperature of $240^{\circ}C$, the polymer showed an increases in thermal degradation temperature by $30{\sim}90^{\circ}C$ according to the thermal treatment time. The polyester-silica composites showed an increases in thermal degradation temperature by $30{\sim}50^{\circ}C$ according to the content of the added silica. Polyester-silica composite showed neither discoloration nor change in optical properties because Knoevenagel condensation reaction was hindered by silica structure. The thermal conductivity of the composites increased linearly according to the content of added silica.

• Journal of Korean Society of Water and Wastewater
• /
• v.24 no.3
• /
• pp.341-349
• /
• 2010

It is well known that manganese is hard to oxidize under neutral pH condition in the atmosphere while iron can be easily oxidized to insoluble iron oxide. The purpose of this study is to identify removal mechanism of manganese in the D water treatment plant where is treating bank filtered water in aeration and rapid sand filtration. Average concentration of iron and manganese in bank filtered water were 5.9 mg/L and 3.6 mg/L in 2008, respectively. However, their concentration in rapid sand filtrate were only 0.11 mg/L and 0.03 mg/L, respectively. Most of the sand was coated with black colored manganese oxide except surface layer. According to EDX analysis of sand which was collected in different depth of sand filter, the content of i ron in the upper part sand was relatively higher than that in the lower part. while manganese content increased with a depth. The presence of iron and manganese oxidizing bacteria have been identified in sand of rapid sand filtration. It is supposed that these bacteria contributed some to remove iron and manganese in rapid sand filter. In conclusion, manganese has been simultaneously removed by physicochemical reaction and biological reaction. However, it is considered that the former reaction is dominant than the latter. That is, Mn(II) ion is rapidly adsorbed on ${\gamma}$-FeOOH which is intermediate iron oxidant and then adsorbed Mn(II) ion is oxidized to insoluble manganese oxide. In addition, manganese oxidation is accelerated by autocatalytic reaction of manganese oxide. The iron and manganese oxides deposited on the surface of the sand and then are aged with coating sand surface.

• Journal of Forest and Environmental Science
• /
• v.36 no.1
• /
• pp.25-36
• /
• 2020

Area exclosure is a widely practiced intervention of restoring degraded lands though its impact in sequestering terrestrial and soil carbon is scanty. The study was initiated to investigate the effect of exclosure of different ages on carbon sequestration potential of restoring degraded dryland ecosystems in eastern Tigray, northern Ethiopia. Twelve plots each divided into three layers were randomly selected from 5, 10 and 15 years old exclosures and paired adjacent open grazing land. Tree and shrub biomasses were determined using destructive sampling while herb layer biomass was determined using total harvest. The average total biomass obtained were 13.6, 24.8, 27.1, and 55.5 Mg ha^-1 for open grazing, 5 years, 10 years, and 15 years exclosures respectively. The carbon content of plant species ranged between 48 to 53 percent of a dry biomass. The total carbon stored in the 5 years, 10 years and 15 years age exclosures were 39 Mg C ha^-1, 46.3 Mg C ha^-1, and 64.6 Mg C ha^-1 respectively while in the open grazing land the value was 24.7 Mg C ha^-1. Carbon stock is age dependent and increases with age. The difference in total carbon content between exclosures and open grazing land varied between 14.3-40 Mg C ha^-1. Although it is difficult to extrapolate this result for a longer future, the average annual carbon being sequestered in the oldest exclosure was about 2.7 Mg C ha^-1 yr^-1. In view of improving degraded area and sequestering carbon, area exclosures are promising options.

• Journal of the Korean Electrochemical Society
• /
• v.12 no.3
• /
• pp.287-294
• /
• 2009

Desalination effects of Capacitive deionization(CDI) process using activated carbon $TiO_2$ composite electrode. In this study, we made the activated carbon electrod and activated carbon $TiO_2$ composite electrode, which analysed at cyclic voltammetry and charge-discharge. The results measured for discharge capacitance in cyclic voltammetry were 125 F/g in activated carbon electrode and capacitance of activatd carbon composite electrode was increased about two time, 243 F/g. The $TiO_2$ content of activated carbon composite electrode was 10 wt.%. When it was added wtih TiO2, electric double layer adsorption content was increased, so it was increased 25% in ion removal ratio of activated carbon electrode.

• Carbon letters
• /
• v.5 no.4
• /
• pp.164-169
• /
• 2004

Carbon-ceramic composites refer to a special class of carbon based materials which cover the main drawbacks of carbon, particularly its proneness to air oxidation, while essentially retaining its outstanding properties. In the present paper, the authors report the results of a systematic study made towards the development of C-SiC-$B_4C$ composites, which involves the effects of compositional parameters, namely, carbon-to-ceramic and ceramic-to-ceramic ratios, on the oxidation behaviour as well as other characteristics of these composites. The C-SiC-$B_4C$ composites, heat-treated to $1400^{\circ}C$, have shown that their oxidation behaviour at temperatures of 800~$1200^{\circ}C$ depends jointly on the total ceramic content and the SiC : $B_4C$ ratio. Good compositions of C-SiC-$B_4C$ composites exhibiting zero weight loss in air at temperatures of 800~$1200^{\circ}C$ for periods of 4~9 h, have been identified. Composites with these compositions undergo a weight gain or a maximum weight loss of less than 3% during the establishment of a protective layer at the surface of carbon in a period of 1~6 h. Significant improvement in the strength of C-SiC-$B_4C$ composites has been observed which increases with an increase in the total ceramic content and also with an increase in the SiC : $B_4C$ ratio.

• Composites Research
• /
• v.29 no.5
• /
• pp.262-268
• /
• 2016

In this work, the pitch-based carbon paper (P-CP) was prepared by re-impregnating of binder pitches and PAN-based milled carbon fibers (MCF) at low temperature carbonization process. The influence of MCF content on physicochemical properties of MCF/P-CP was investigated. As a result, the tensile strength of MCF/P-CP was increased sharply from 10 wt.% to 20 wt.% of MCF. Also, the increase of MCF content led to the decrease of interfacial contact resistivity and the improvement of electrical and thermal conductivity of MCF/P-CP. These results were probably due to the increase of density of MCF/P-CP, resulting in the formation of electrically and thermally conductive paths of the carbon paper.

• Membrane and Water Treatment
• /
• v.1 no.3
• /
• pp.215-230
• /
• 2010

Poly(vinylidene fluoride-co-hexafluoropropylene), PVDF-HFP, hollow fiber membranes were prepared by the dry/wet spinning technique using different polyethylene glycol (PEG) concentrations as non-solvent additive in the dope solution. Two different PEG concentrations (3 and 5 wt.%). The morphology and structural characteristics of the hollow fiber membranes were studied by means of optical microscopy, scanning electron microscopy, atomic force microscopy (AFM) and void volume fraction. The experimental permeate flux and the salt (NaCl) rejection factor were determined using direct contact membrane distillation (DCMD) process. An increase of the PEG content in the spinning solution resulted in a faster coagulation of the PVDF-HFP copolymer and a transition of the cross-section internal layer structure from a sponge-type structure to a finger-type structure. Pore size, nodule size and roughness parameters of both the internal and external hollow fiber surfaces were determined by AFM. It was observed that both the pore size and roughness of the internal surface of the hollow fibers enhanced with increasing the PEG concentration, whereas no change was observed at the outer surface. The void volume fraction increased with the increase of the PEG content in the spinning solution resulting in a higher DCMD flux and a smaller salt rejection factor.