• 대한공업교육학회지
• /
• v.36 no.1
• /
• pp.23-45
• /
• 2011

The purpose of this study was the development of green technology education program for elementary school creative activities. The result of this study were follow. Basically this program was developed through three steps of preparation, development and improvement. First, in the preparation step, Need analysis were analyzed by investigation the needs of the society. Then the themes of this program were determined by thestages based on the National and social issues. Second, in the development step, the following was included. 1) Begin with Setting up education goals of this program. 2) selecting of learning object and content. 3) structuring educational program. Third, in the improvement step, program was verified of validity by experts

• Smart Structures and Systems
• /
• v.26 no.2
• /
• pp.195-211
• /
• 2020

Among anti-seismic technologies, base isolation is a very effective means of mitigating damage to structural and nonstructural components, such as equipment. However, most seismic isolation systems are designed for mitigating only horizontal seismic responses because the realization of a vertical isolation system (VIS) is difficult. The difficulty is primarily due to conflicting isolation stiffness demands in the static and dynamic states for a VIS, which requires sufficient rigidity to support the self-weight of the isolated object in the static state, but sufficient flexibility to lengthen the isolation period and uncouple the ground motion in the dynamic state. To overcome this problem, a semi-active VIS, called the piezoelectric inertia-type vertical isolation system (PIVIS), is proposed in this study. PIVIS is composed of a piezoelectric friction damper (PFD) and a leverage mechanism with a counterweight. The counterweight provides an uplifting force in the static state and an extra inertial force in the dynamic state; therefore, the effective vertical stiffness of PIVIS is higher in the static state and lower in the dynamic state. The PFD provides a controllable friction force for PIVIS to further prevent its excessive displacement. For experimental verification, a shaking table test was conducted on a prototype PIVIS controlled by a simple controller. The experimental results well agree with the theoretical results. To further investigate the isolation performance of PIVIS, the seismic responses of PIVIS were simulated numerically by considering 14 vertical ground motions with different characteristics. The responses of PIVIS were compared with those of a traditional VIS and a passive system (PIVIS without control). The numerical results demonstrate that compared with the traditional and passive systems, PIVIS can effectively suppress isolation displacement in all kinds of earthquake with various peak ground accelerations and frequency content while maintaining its isolation efficiency. The proposed system is particularly effective for near-fault earthquakes with long-period components, for which it prevents resonant-like motion.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.4
• /
• pp.745-752
• /
• 2005

In this paper we propose and implement a digital part of a receiver system for identifying a moving object and its tracking position in wireless environment. We assumed UWB(Ultra Wide Band)-based communication system for target application and used serial communication method(RS-232). The proposed digital receiver consists of RS-232-type1/RS-232-type2 for input and output of serial communication, ID Detector for detecting IDs, and PISO&Buffer circuit to buffer input signals for appropriate operation of ID Detector. We implemented the digital receiver with minimal hardware(H/W) resource according to target application of UWB-based communication system. So it correlates input patterns with pre-stored patterns though repeated detecting method for multiple IDs. Since it has reference panerns in the Ve-stored form, it can detect various IDs instantly. Also we can program content and size of reference patterns considering compatibility with other systems .The implemented H/W was mapped into XC2S100PQ208-5 FPGA of Xilinx, occupied 727($30\%$) cells, and stably operated in the clock frequency of 75MHz(13.341ns).

• Conservation Science in Museum
• /
• v.16
• /
• pp.32-45
• /
• 2015

The bronze incense burner, discovered in Chungung-dong, Hanam, Gyeonggi-do in 1971, is a hanging incense burner dating from the Goryeo period. The incense burner was covered with a thick layer of clay. The object was in a severely deteriorated state, affected by bronze disease which resulted in extensive corrosion. Numerous cracks were present across its surface, and some parts had been broken off. To preserve and display the bronze incense burner in a stable condition, deposits of foreign material were removed from the surface, and the weakened metal was strengthened. Cracked and broken areas were reinforced using woven glass fiber, followed by the application of epoxy resin to restore the shape. To investigate the method of production, a chemical analysis was performed, and the microstructure was examined. The chemical analysis revealed that the body of the incense burner as well as the ear, loop, lid and the knob were cast in a ternary alloy of Cu-Sn-Pb. Moreover, copper nails with high copper content were used to securely join the ear to the body of the incense burner. The microstructure was mainly α-phase, and non-intermetallic inclusions composed of Cu and S were detected.

• Archives of design research
• /
• v.14 no.1
• /
• pp.187-197
• /
• 2001

Conventional design producing systems using the Internet are largely classified into two groups: a basic type in which an operator of a design producing site receives an order for manufacture of a design from a purchaser, produces the design based on the content of the received order, and delivers the produced design to the purchaser; and a type in which a purchaser inspects given designs and select one of them for purchasing. Such conventional design producing systems have following problems. Firstly, receiving an order over the internet and delivering a produced design to a purchaser has nearly the same procedure as a conventional logo design procedure with the sole exception that an order can be received through the Internet. Therefore, the production of a design still costs a great deal and takes much time. Secondly, inspecting given designs, selecting one and producing the selected design is like simply selecting a picture, and thus a purchaser is not allowed to modify a design. To solve the above problems, it is an object of the present a new solution to provide a self-design producing system and method using network, in which a purchaser searches a design database for a design suitable for the purchaser's company, determines a design database by modifying design conditions, and makes an order for manufacture of a product to which the determined design is applied, through the Internet.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.50 no.4
• /
• pp.352-358
• /
• 2017

The object of this study is to assess physicochemical and microbiological hazards involved during the processing of shellfish products such as oysters, clam, and mussels. Samples including raw materials, intermediates, and final products in the processing process were collected from seven simple-processed shellfish facilities. In the samples obtained from the facilities, viable cell count and coliform group were detected less than that of the Korean Government guidelines. In addition, the high-risk bacterial pathogens such as Escherichia coli O157:H7, Salmonella sp., and Listeria monocytogenes were not identified in raw materials and final products. However, the low-risk pathogens, Staphylococcus aureus and Vibrio parahaemolyticus, were detected in some final products. The level of heavy metal content in the final products tested in this study meets the recommendations by the Korean Government standard guidelines. No foreign materials in the final products were also observed. Considering these results, it was concluded that no significant food hazards exists in the processing process of simple-processed shellfish products. However, it is essential to improve the food safety control in the shellfish processing facilities since S. aureus, a personal sanitary indicative bacterium, was continuously detected over seven simple-processed shellfish facilities.

• Journal of KIISE:Software and Applications
• /
• v.34 no.1
• /
• pp.18-29
• /
• 2007

In this paper we present a system that classifies brain MR images by using 2 level decision tree learning. There are two kinds of information that can be obtained from images. One is the low-level features such as size, color, texture, and contour that can be acquired directly from the raw images, and the other is the high-level features such as existence of certain object, spatial relations between different parts that must be obtained through the interpretation of segmented images. Learning and classification should be performed based on the high-level features to classify images according to their semantic meaning. The proposed system applies decision tree learning to each level separately, and the high-level features are synthesized from the results of low-level classification. The experimental results with a set of brain MR images with tumor are discussed. Several experimental results that show the effectiveness of the proposed system are also presented.

• Journal of Science Education
• /
• v.34 no.1
• /
• pp.23-32
• /
• 2010

The purpose of this study was to analyze the trend of domestic studies related to science teaching-learning methods. We reviewed articles published according to year, method, subjects and topic. The methods reported commonly in science education books were extracted. Experiment, cooperative learning, and discussion were methods which had been researched widely. Experimental study of them was utilized most. And next content analysis, survey, and case study were utilized much. The most object of experimental study was middle school students. These reviewed papers showed effects which were related to science achievement, attitude, inquiry ability and self-efficacy. As a result of this study we should research to apply and develop science teaching-learning methods variously. We ought to enlarge research direction to analyze context which applies science teaching-learning methods to educational field by qualitative study. We should try to study effects of teaching-learning methods longitudinally and latitudinally.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.25 no.3
• /
• pp.199-204
• /
• 2005

The object of this experiment was to suggest the optimum N fertilization level in Kentucky bluegrass pasture fer turf'of school ground. The field trials were conducted from 2001 to 2003 at Chungnam National University in order to evaluate the dry matter yield and quality on the N levels(100, 150 and 200kg/ha). With increasing the N level, the average DM yield for 2 years in Kentucky bluegrass pasture significantly increased. The average total DM yields was 6,317, 8,495 and 10,361 kg/ha at N 100, 150 and 200 kg/ha level(p<0.05), respectively. CP content and DMD were significantly increased(p<0.05), whereas fibrous constituents were not detected obvious tendency, but CPDM and DDM yields were significantly increased with increasing the N levels for 2 years(p<0.05). Based on the results, considering the total DM yield and quality of herbages which incidentally produced from Kentucky bluegrass pasture in school ground, it can be suggested that the suitable application N level was 200 kg/ha.

• Journal of Digital Contents Society
• /
• v.16 no.1
• /
• pp.113-121
• /
• 2015

Artifact pattern representation of a method using the digital technology is largely are two digital rubbing technique and digital contrast technique. Digital rubbing technique is clearly with the naked eye to see the original prestigious and difficult to build a digital rubbing data patterns by scanning a prestigious and patterns carved into the artifacts in three dimensions without compromising the circle to represent the three-dimensional effect by contrast it to the objective value refers to a technique that can be represented in digital. Digital contrast technique can not be calculated if the depth information of the object due to the glassy film of artefacts in a three-dimensional surface scanning and the application of this technique refers to a realistic image mapped digital technique for generating digital image contrast. Digital rubbing technique is mainly useful to express the most prestigious and patterns expressed in pottery or tile and stone monument, etc. engraved or embossed, digital contrast techniques can be used effectively to artifacts such as magnetic or glass can not be applied to the digital rubbing technique.