• Environmental Analysis Health and Toxicology
• /
• v.19 no.1
• /
• pp.1-24
• /
• 2004

Since dioxins became a serious concern in Korea, a significant number of investigations have been conducted to address diverse issues related to dioxins. However, the results have not been organized for ready access and use. The principal purposes of the work were to ⅰ) provide an archive of dioxin researches in Korea and ⅱ) give an overview of dioxin contamination. The focus of this work was placed on the contamination levels and characteristics concerning the waste incinerators emissions, environmental media, and biological samples(fishes/shellfishes, foods, and human body). Principal component analysis was conducted to identify common and/or unique features and the important variables associated with the congener patterns. From a comprehensive search of academic journals, research and monitoring project reports, dissertations, and periodicals of other forms, a total of 115 counts were found that met the purposes of this study. The contamination levels of various samples were summarized and compared to those reported in foreign literatures. The congener patterns varied largely with environmental media and distinguished particularly by OCDD, 1,2,3,4,6,7,8-HpCDF, and OCDF for the samples within the same media. The proximity to emission sources differentiated the congener patterns in air and soil samples by the fraction of OCDD.

• Korean Journal of Veterinary Service
• /
• v.26 no.3
• /
• pp.221-225
• /
• 2003

In order to monitoring the chicken meat hygiene, 165 chicken samples were tested for contamination agents such as the total bacterial counts, coliform bacterial counts and falling bacterial counts. The prevalence of level on number of standard plate count, total bacterial counts in less than $10^3\;cfu/cm^2$, $10^3{\sim}10^4\;cfu/cm^2$ and $10^3-10^5\;cfu/cm^2$ was 30 samples(18.2%), 98 samples(59.4%) and 37 samples(22.4%), respectively. The coliform bacterial counts in less than $10^2\;cfu/cm^2$, $10^2{\sima}10^$\;cfu/cm^2$ and $10^3{\sim}10^4\;cfu/cm^2$ was 7 samples(42.2%), 66 samples(40.0%), 92 samples(58.8%), respectively. The falling bacterial counts in plants was higher 9.1 in summer, 8.4 in fall, 7.2 in spring and 6.7 in winter, in order.

• Applied Science and Convergence Technology
• /
• v.25 no.1
• /
• pp.15-18
• /
• 2016

Study investigated the optimal anodizing conditions for fabricating an oxide film that produces less contamination in a corrosive plasma environment, using oxalic acid and tartaric acid. Oxide films were produced using sulfuric acid, oxalic acid, and tartaric acid electrolyte mixtures with various mole ratios. The oxide film made by adding 0.05M tartaric acid to 0.3M oxalic acid showed higher breakdown voltage and lower leakage current. Additionally, contamination particles were reduced during plasma etching, thus demonstrates that this mixture presented optimal conditions. However, higher tartaric acid content (0.1 M, 0.15 M) led to lower breakdown voltages and higher leakage currents. Also, it resulted in more cracking during thermal shock tests as well as the generation of more contamination particles during plasma processing.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.36 no.1
• /
• pp.141-152
• /
• 1994

Our experiment investigated the degree of soil contaimination caused by oil leakage. Each soil sample was taken by boring 5, 8m below the test areas, located 5 to 30m from storage tanks at oil stations. According to the results from a series of laboratory tests(both soxhiet extract test and gas chromatograph test), Traces of a light oil were found in all samples except in Dj8, rocky soil and gasoline and petroleum were not detected. We concluded that soil contamination was caused by the corrosion of storage tanks or alternatively by oil overflow caused during the flooding of underground water seeping into the tank during heavy rain fall or the spillage caused by carelessness during lubrication. Old stations without a concrete box enclosing their metal tanks run a greater risk of oil leakage. To research the effect of oil leakage on plant growth and underground water, We examined the results of research conducted overseas. According to these results, when oil leakage occurs, plant growth is repressed and agricultural crops experience low productivity levels. Also, the contamination of underground water can be serious when oil spreads to the aquifer layer. As a result of these problems, to prevent oil leakage and minimize its contaminating effects at oil stations, it is necessary to improve facilities of storage tanks and have the monitoring system of oil leakage.

• Safety and Health at Work
• /
• v.5 no.4
• /
• pp.169-174
• /
• 2014

We have been examining the issue of healthcare workers' exposure to antineoplastic drugs for nearly a decade and have observed that there appears to be more publications on the subject matter originating from Europe than from North America. The concern is that findings from Europe may not be generalizable to North America because of differences in handling practices, regulatory requirements, and training. Our objective was to perform a literature review to confirm our observation and, in turn, identify gaps in knowledge that warrants addressing in North America. Using select keywords, we searched for publications in PubMed and Web of Science. All papers were initially classified according to the originating continent and then categorized into one or more subject categories (analytical methods, biological monitoring, occupational exposure, surface contamination, and probability of risk/exposure). Our review identified 16 papers originating from North America and 55 papers from Europe with surface contamination being the subject matter most often studied overall. Based on our results, we are of the opinion that North American researchers need to further conduct dermal and/or urinary drug contamination studies as well as assess the exposure risk faced by healthcare workers who handle antineoplastic drugs. Trends in exposure levels should also be explored.

• Journal of the Semiconductor & Display Technology
• /
• v.22 no.4
• /
• pp.53-58
• /
• 2023

The storage capacity of 3D-NAND flash memory has been enhanced by the multi-layer dielectrics. The deposition process has become more challenging due to the tight process margin and the demand for accurate process control. To reduce product costs and ensure successful processes, process diagnosis techniques incorporating artificial intelligence (AI) have been adopted in semiconductor manufacturing. Recently there is a growing interest in process diagnosis, and numerous studies have been conducted in this field. For higher model accuracy, various process and sensor data are required, such as optical emission spectroscopy (OES), quadrupole mass spectrometer (QMS), and equipment control state. Among them, OES is usually used for plasma diagnostic. However, OES data can be distorted by viewport contamination, leading to misunderstandings in plasma diagnosis. This issue is particularly emphasized in multi-dielectric deposition processes, such as oxide and nitride (ON) stack. Thus, it is crucial to understand the potential misunderstandings related to OES data distortion due to viewport contamination. This paper explores the potential for misunderstanding OES data due to data distortion in the ON stack process. It suggests the possibility of excessively evaluating process drift through comparisons with a QMS. This understanding can be utilized to develop diagnostic models and identify the effects of viewport contamination in ON stack processes.

• Journal of Environmental Science International
• /
• v.27 no.12
• /
• pp.1279-1290
• /
• 2018

Sea gulls are high trophic level consumers in the coastal environment, and thus, which have been widely used to monitor contamination biomagnified through a food web. However, such monitoring studies using sea gulls have been rare in the Korean literature. The National Environmental Specimen Bank chose eggs of a black-tailed gulls (Larus crassirostris) to serve as an environmental specimen for the long-term monitoring of the coastal ecosystem affected by terrestrial pollutants. Black-tailed gull eggs were collected from Baengnyeongdo, Hongdo and Uleungdo, and their DDTs and total mercury content were determined. The highest concentration of ${\Sigma}DDTs$ was $231.6{\pm}106.1{\mu}g/kg$ wet in Baengnyeongdo, followed by $230.0{\pm}123.8{\mu}g/kg$ wet in Ulleungdo, and $117.7{\pm}18.3{\mu}g/kg$ wet in Hongdo. In addition, total mercury was detected at $414.5{\pm}97.6{\mu}g/kg$ wet in Ulleungdo, $363.9{\pm}123.6{\mu}g/kg$ wet in Hongdo, and $237.5{\pm}42.3{\mu}g/kg$ wet in Baengnyeongdo. Relatively high concentrations of the target pollutants were recorded in specimens from Ulleungdo. Additional comprehensive and prolonged studies are required to elucidate spatial and temporal patterns of contamination in black-tailed gull eggs with regard to monitoring contaminant trends in eggs and prey.

• Journal of Soil and Groundwater Environment
• /
• v.18 no.2
• /
• pp.19-26
• /
• 2013

This study developed the classification of National Soil Quality Monitoring Network (NSQM) and its site selection criteria to meet the recently established purposes of the NSQM. The NSQM were suggested by this study to classify into the six-purposes site groups from the current classification of land uses. The six purposes site groups were 1) intensive observation sites, 2) contaminant loading sites, 3) human activity sites, 4) background sites, 5) river soil sites, and 6) sites near the groundwater quality monitoring wells. Furthermore, this study developed the site selection criteria of NSQM utilizing the accumulated NSQM data, road traffic data, chemical emission data, census, soil information, and the literature related to soil quality variation due to contaminant loads. For selecting suitable sites for NSQM, this study used road traffic, chemical emission, the distance from the contaminant sources, and population information as specific criteria. The suggested site classification and criteria were appled for the current 100 NSQM sites for evaluation. Forty sites were met to the criteria suggested by this study, but sixty sites were not met to the criteria. However, some of the sixty sites also included the obscure sites that their addresses were not apparent to find them.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1998.04a
• /
• pp.321-327
• /
• 1998

This paper presented a case study on the application of on-line wear monitoring technique to a high duty air-turbo-compressor system. Main objects monitored were a gear unit and metal bearings, both shown frequent troubles due to the severe operation conditions at heavy dynamic load. The air-turbo-compressor system needs secure condition monitoring because it is one of the main utilities in steel making industry. Temperature and vibration characteristics have been mainly on-line monitored in this system for a predictive maintenance; however, it has been shown that they are not fairly good enough to give an early warning prior to the machine failure. In this work, an on-line Opto Magnetic Detector(OMD) was implemented for an on-line wear monitoring, which quantitatively measured the contamination level of both ferrous and non-ferrous wear particles by detecting the change in optical density of used oil. Results showed that the application of on-line OMD system was satisfactory in diagnosis of the machine system.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.32-32
• /
• 2011

Plasma etching is used in microelectronic processing for patterning of micro- and nano-scale devices. Commonly, optical emission spectroscopy (OES) is widely used for real-time endpoint detection for plasma etching. However, if the viewport for optical-emission monitoring becomes blurred by polymer film due to prolonged use of the etching system, optical-emission monitoring becomes impossible. In addition, when the exposed area ratio on the wafer is small, changes in the optical emission are so slight that it is almost impossible to detect the endpoint of etching. For this reason, as a simple method of detecting variations in plasma without contamination of the reaction chamber at low cost, a method of measuring plasma impedance is being examined. The object in this research is to investigate the suitability of using plasma impedance monitoring (PIM) with statistical approach for real-time endpoint detection of $SiO_2$ etching. The endpoint was determined by impedance signal variation from I-V monitor (VI probe). However, the signal variation at the endpoint is too weak to determine endpoint when $SiO_2$ film on Si wafer is etched by fluorocarbon plasma on inductive coupled plasma (ICP) etcher. Therefore, modified principal component analysis (mPCA) is applied to them for increasing sensitivity. For verifying this method, detected endpoint from impedance analysis is compared with optical emission spectroscopy (OES). From impedance data, we tried to analyze physical properties of plasma, and real-time endpoint detection can be achieved.