• Proceedings of the KACD Conference
• /
• 2001.11a
• /
• pp.577-577
• /
• 2001

The lastest concepts in bonding are "total etch", in which both enamel and dentin are etched with an acid to remove the smear layers, and "wet dentin" in which the dentin is not blown dry but left moist before application of the bonding primer. Ideally, the application of a bonding agent to tooth structure should be insensitive to minor contamination from oral fluids. Clinically contaminations such as saliva, gingival fluid, blood and handpiece lubricant are often encountered by dentists during preparation of a restoration. The aim of this study was to evaluate the effect of contamination by hem-ostatic agents on shear bond strength of compomer restorations. One hundred and ten extracted human maxillary and mandibular molar teeth were collected. The teeth were cleaned from soft tissue remnant and debris and stored in physiologic solution until they were used. Small flat area on dentin of the buccal surface were wet ground serially with 400, 800 and 1200 abrasive paper on automatic polishing machine. The teeth were randomly divided into 11 groups. Each group was conditioned as follows: Group 1 : Dentin surface was not etched and not contaminated by hemostatic agents. Group2 : Dentin surface was not etched but was contaminated by Astringedent (Ultradent product Inc., Utah, U.S.A.). Group3 : Dentin surface was not etched but was contaminated by Bosmin (Jeil Phann, Korea.). Group4 : Dentin surface was not etched but was contaminated by Epri-dent (Epr Industries, NJ, U.S.A.). Group5: Dentin surface was etched and not contaminated by hemostatic agents. Group 6 : Dentin surface was etched and contaminated by Astringedent. Group7 : Dentin surface was etched and contaminated by Bosmin. Group8 : Dentin surface was etched and contaminated by Epri-dent. Group9 : Dentin surface was contaminated by Astringedent. The contaminated surface was rinsed by water and dried by compressed air. Group10 : Dentin surface was contaminated by Bosmin. The contaminated surface was rinsed by water aud dried by compresfed air. Group 11 : Dentin surface was contaminated by Epri-dent. The contaminated surface was rinsed by water and dried by compresfed air. After surface conditioning, F2000 was applicated on the conditoned dentin surface. The teeth were thermocycled in distilled water at $5^{\circ}C\;and\;55^{\circ}C$ for 1000 cycles. The samples were placed on the binder with the bonded compomer-dentin interface parallel to the lmife-edge shearing rod of the Universal testing machine(Zwick 020, Germany) running at a cross head speed of 1.0mmimin. There were no significant differences in shear bond strength between groups 1 and group 3 and 4, but group 2 showed significant decrease in shear bond strength compared with group 1. There were no significant differences in shear bond strength between group 5 and group 7 and 8, but group 6 showed significant decrease in shear bond strength compared with group 5. There were no significant differences in shear bond strength between group 5 and group 9, 10 and 11.

• Particle and aerosol research
• /
• v.18 no.1
• /
• pp.9-21
• /
• 2022

In this study, a novel antiviral coating method for the air filtration system of subway station was investigated. Using dry aerosol coating process, we developed a high-performance antiviral air filter with spark discharger and carbon brush type ionizer. Silver nanoparticles were produced by a spark discharge generation system with ion injection system and were used as antiviral agents coated onto a medium grade air filter. The pressure drop, filtration efficiency, and antiviral ability of the filter against aerosolized MS2 virus particles as a surrogate of SARS-CoV-2 virus were tested with dust contamination. Dust contamination caused the increase of the filtration efficiency and pressure drop, while the antiviral agents (in this study, silver nanoparticles) coating did not have any significant effect on the filtration efficiency and pressure drop. Using these properties, we suggested a novel method to maximize the antiviral performance of the antiviral air filter that was contaminated by dust particles. Moreover theoretical analysis of antiviral ability with dust contamination and re-coated antiviral agents was carried out using a mathematical model to calculate the time-dependent antiviral effect of the filter under actual conditions of subway station. Our model can be used to apply on antiviral air filtration system of subway station for prevention of pandemic diffusion, and predict the life cycle of an antiviral filter.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.39 no.2
• /
• pp.153-159
• /
• 2012

The objective of this study was to assess the effect of salivary contamination on shear bond strength of pit and fissure sealant using several bonding agents by means of applying saliva at different stages of treatment. 56 teeth were randomly divided into one of seven groups (8 per group): (Group A, B) acid etching; (Group C, D, E) Adper$^{TM}$ Single Bond after acid-etching; (Group F, G) Adper$^{TM}$ Prompt L-pop. Saliva was applied to teeth surface of B, D, E, and G groups for 10 seconds. Especially, group D was contaminated after acid-etching and group E was contaminated with saliva after adhesive application. After light curing, all of the specimens were thermocycled and the shear bond strength tests were performed. The results were as follows. 1. In generally performed pit and fissure sealant group, shear bonding strength significantly differently reduced when was contaminated by saliva (p<0.05). However the group that was applied with bonding agent during pit and fissure sealant procedure, there were no significant differences in the kind of bonding agents nor the stage of contamination. 2. In group that was not contaminated by saliva during pit and fissure sealant treatment, Adper$^{TM}$ Single Bond yielded the highest bonding strength but there were no significant differences. 3. The failure pattern on the debonded surfaces shows that most specimens from groups using bonding agents showed cohesive failures while most specimens from groups that didn't use bonding agents showed adhesive failures.

• Molecular & Cellular Toxicology
• /
• v.1 no.1
• /
• pp.26-31
• /
• 2005

The detection and the regulation of man-made synthetic chemicals and the establishment of toxicity that may pose a genetic hazard in our environment are subjects of great concern because of its close correlation between environmental contamination and human health. Since the tens of thousands of man-made chemicals that have been introduced into the environment in the last few decades must also be tested for their damaging effect on DNA, the agents that cause this damage must be identified.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.42 no.3
• /
• pp.1-6
• /
• 2010

A new testing method named pitch deposit tester (PDT) was developed by KRICT in order to evaluate the deposit potential of micro-stickies. The new method involves depositing the potential pitch particles on the air bubble covered plastic film set in the pitch deposit tester (PDT) and analysing the deposited area by an image analyzer. In this study, the effect of fixing agents on potential pitch deposition was elucidated. The effects of some fixing agents (polyamine and polyethyleneimine) on pitch control were investigated by the PDT test of 100% recycled newsprint stock. The study suggested that proper use of the PEI can lead to better pitch control than that of polyamine. The efficiency of novel screening method using the PDT and retention and drainage analyser (RDA) for fixing agents in terms of retention and deposit contamination could be confirmed by above mentioned results.

• Korean Parent-Child Health Journal
• /
• v.1
• /
• pp.115-126
• /
• 1998

It is the base of the health through life, the health of children is very important. The health education is the most effective measure for disease prevention and health promotion. To educate children for the health, we must consider their concept of the health before. Therefore I attempted this study for investigation for the concept about respiratory communicable disease which is one of the most important health problems. The design of this study was descriptive investigational study. The subjects of this study are 4-6 aged 65 children who are attending district nursery school. The tools of this study constituted 3 parts as an etiological agents, environmental agents and host agents. The data were collected by an individual interview and cartoon cards. The results of this study are as followed: 1. The preschool children tend to think contamination along the physical distance, nearer things more relational. 2. The preschool children tend to have their experience centered thinking. 3. There was a highly significant correlation between the children's age and knowledge scores(r = 0.431, P= 0.0003). 4. There wasn't a significant correaltion between sex group. In conclusion, it wad founded that the preschool have a tendancy to think communicable disease along the physical distance and their daily life experiences. This results support the Piaget's cognitive developmental theory. Therefore, to develop the health education program for preschool students, above results must be referenced.

• Journal of Environmental Science International
• /
• v.3 no.2
• /
• pp.157-164
• /
• 1994

Various antimicrobial agents are widely used for the purpose of antimicrobial process. We investigated antimicrobial activity and reduction efficiency of mal-ordour by the diphenyl ether compound (2,4,4'- trichloro -2'- hydroxy diphenyl ether) against Sraphylocom aureus(S.aureus and Proton vulgaris(p.vulgaris causing the mal-ordour, Especially, the diphenyl ether compound is not restricted to the regulation of water-contamination. In this research, we found that the optimum concentration of diphenyl ether compound was 1.5w% for both strains and antimicrobial expressions were c0.38t= 2.56 for S.aureus, c0.38t=2.67 for P.vulgaris. We found also that -OH group played the role of antimicrobial functional group. Lastly, reduction effect of mal-ordour was more than 90% for both strain at the optimum conditions. Key Words : antimicrobial agents, antimicrobial activity, reduction effect of mal-ordour, antimicrobial expression, antimicrobial functional group.

• The Plant Pathology Journal
• /
• v.32 no.4
• /
• pp.329-339
• /
• 2016

The short-term effects of low-level contamination by heavy metals (As, Cd, Cu, and Pb) on the soil health were examined by analyzing soil nematode community in soils planted with tomatoes. For this, the soils were irrigated with five metal concentrations ([1, 1/4, $1/4^2$, $1/4^3$, and 0] ${\times}$ maximum concentrations [MC] detected in irrigation waters near abandoned mine sites) for 18 weeks. Heavy metal concentrations were significantly increased in soils irrigated with MC of heavy metals, among which As and Cu exceeded the maximum heavy metal residue contents of soil approved in Korea. In no heavy metal treatment controls, nematode abundances for all trophic groups (except omnivorous-predatory nematodes [OP]) and colonizer-persister (cp) values (except cp-4-5) were significantly increased, and all maturity indices (except maturity index [MI] of plant-parasitic nematodes) and structure index (SI) were significantly decreased, suggesting the soil environments might have been disturbed during 18 weeks of tomato growth. There were no concentration-dependent significant decreases in richness, abundance, or MI for most heavy metals; however, their significant decreases occurred in abundance and richness of OP and cp-4, MI2-5 (excluding cp-1) and SI, indicating disturbed soil ecosystems, at the higher concentrations (MC and MC/4) of Pb that had the most significant negative correlation coefficients for heavy metal concentrations and nematode community among the heavy metals. Therefore, the short-term effects of low-level heavy metal contamination on soil health can be analyzed by nematode community structures before the appearance of plant damages caused by the abiotic agents, heavy metals.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.23 no.3
• /
• pp.169-176
• /
• 2013

Objectives: The aim of this study is to critically review the health effects of not only direct exposure to biocide, but also indirect exposure to by-product hazardous agents generated through the use of biocide in metalworking operations. Methods: An extensive literature review was conducted of studies reporting on respiratory disease cases, particularly hypersensitivity pneumonitis (HP), in environments using water-soluble metalworking fluids (MWFs). Keyword search terms included 'metalworking fluids', 'machining fluids', 'metalworking operation' 'machining operation' and 'biocide', which were also used in combination. Additional articles were identified in references cited in the articles reviewed. Results: Several of the field, epidemiological and experimental studies reviewed assumed that the symptoms and signs typical of HP developed in machinists who handled water-soluble MWF could be caused by inhalation exposure to nontuberculous mycobacteria (NTM). Most NTM are known to be not only resistant to both biocide and disinfectant, but also to have acid-fast cell walls that are highly antigenic. The presence or persistence of the Mycobacterium species, referred to as NTM, in metalworking fluid-using operations may be caused by NTM contamination in either the natural water or tap water that is used to dilute the base oil and additives for water-soluble MWFs. This hypothesis that NTM contamination in water-soluble MWFs is a causative agent of HP has high biologic plausibility, such as antigenic property, hydrophobicity and small diameter (< 5 um). Conclusions: Aerosolized mycobacteria colonized from MWF are likely to be causing the HP. Inhalation exposure to mycobacteria should be considered as a possible cause for the development of HP.

• Journal of Radiation Protection and Research
• /
• v.23 no.1
• /
• pp.7-15
• /
• 1998

In order to evaluate the effectiveness of some decontamination agents against skin contamination of $^{60}Co$ and $^{137}Cs$, the experiments were carried out in this study. In the experiments, pig skin was used instead of human skin , $^{60}CoC1_2$ and $^{137}CsCl$ were used the liquid sources of skin contamination. To examine the effectiveness of decontamination agents, skin decontamination was tried using soup, EDTA, KAERICON which was developed for decontamination of radionulides on the surface of building structure, and new decontamination agents such as IOCON, TRICON, and CHARCON, which were developed in this study. The absorption of radionuclides through the skin was evaluated by the gamma-tay detection on the surface of sample skin after radionuclides were penetrated into the skin during 16 hour soiling time. The results of this absorption experiment indicated that 11.5% and 3.2% of initial amounts of $^{137}Cs$ and $^{60}Co$, respectively, were panerated into the skin. In the experiment to remove the residual radioactivity fixed on the skin, KAERICON showed the decontamination rates up to 52.1%(decontamination factor of 2.1) and IOCON showed the equivalent decontamination rate (decontamination factor 1.9) for $^{137}Cs$. However, IOCON and CHARCON showed the poor decontamination rates of less than 20%(decontamination factor of 1.2) for $^{60}Co$, and KAERICON showed the poor decontamination rate (decontamination factor 1.1) for $^{60}Co$. For TRICON, the decontamination factors were 1.6 to 1.8 for $^{137}Cs$, and 1.0 to 1.2 for $^{60}Co$, respectively.