• Economic and Environmental Geology
• /
• v.54 no.4
• /
• pp.483-494
• /
• 2021

This study was carried out to investigate the feasibility of reducing clean cover soil using a flooded column test in arsenic-contaminated farmland reclamation of abandoned coal mine area that shows generally low or about worrisome level (25 mg/kg) of Korea soil environment conservation act unlike abandoned metal mine. During the monitoring period of soil solution for 4 months, chemical properties (pH, EC, ORP, Fe, Mn, Ca, and As) in each layer (clean soil cover and contaminated/stabilized soil) showed different variation. This result revealed that soil solution in stabilized or contaminated soil rarely affected that in cover soil. Whether stabilized or not, arsenic concentrations in the rice roots grown in the soil covers with the thickness of 40 cm decreased by 98% in compared with the that grown in the control soil. In case of the soil covers with 20 cm thickness on stabilized soil, it decreased by 80% and this was 22 percentage point higher than when the soil of lower layer was not stabilized. Thus, reducing clean cover soil could be possible in contaminated farmland soil reclamation if appropriate stabilization of contaminated soil is carried.

• Journal of environmental and Sanitary engineering
• /
• v.18 no.4
• /
• pp.6-14
• /
• 2003

A spring water quality was depend on the aquifer soil status. However, water quality was rapidly contaminated by artificial affects. In the contaminate components, the heavy metals were significantly important because the heavy metals influence the plants and the animals. But, it is difficult to find out how the heavy metal can affect in the water quality. According to the group analysis and the factor analysis, water quality management was advanced. The experimental area was divided into three region and six factor. The six factor could not define the overall water quality, however this method were one of the useful methods.

• Korean Journal of Veterinary Service
• /
• v.25 no.2
• /
• pp.111-116
• /
• 2002

To demonstrate the prevalence of Toxocara spp eggs in public playgrounds in Seoul city, sand samples collected from March to November in 2001 were examined. Of 2,600 sand samples from 650 playgrounds surveyed, 41 sands from 39 places(6%) had Toxocara rims eggs. Sand samples in apartment complex were more contaminated(9.7%) with the eggs than in residential area(2.4%). Toxocara canis eggs in sands were found in large number of in the spring but other seasons were less found.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2004.09a
• /
• pp.381-384
• /
• 2004

To know the occurrence and distribution of MTBE in groundwater, the analysis of groundwater around petroleum spill area was executed. The groundwaters of the 4 study sites are severely contaminated with MTBE and has the highest values of 650mg/L. The plume length of MTBE is longer than that of BTEX in D site and it is caused by the high solubility and low sorption capacities of MTBE.

• Journal of Powder Materials
• /
• v.14 no.2 s.61
• /
• pp.85-96
• /
• 2007

• Journal of Nutrition and Health
• /
• v.10 no.3
• /
• pp.7-9
• /
• 1977

Quantitative analysis of harmful Hg in edible bean sprouts was carried out by the Atomic Absorption Spectrophotometer (Perkin-Elmer Model 403). The samples studied as shown in Table 2. are edible bean sprouts (36) which wet·e collected from Gwangju area. It was investigated that the Mercury (Hg) content of edible bean sprouts was from 0.0098 ppm to 0.533 ppm (average 0.240). Mercury contaminated edible bean sprouts studied, was about 50 percentage of total samples.

• Journal of Biosystems Engineering
• /
• v.33 no.6
• /
• pp.404-409
• /
• 2008

Excessive presence of heavy metals in environment affects plants and fruits grown in the contaminated area. Rapid on-site monitoring of heavy metals can provide useful information for efficiently characterizing heavy metal-contaminated sites and for minimizing the exposure of the contaminated food crops to humans. This study reports on the evaluation of gold and glassy carbon (GC) electrodes with mercury or bismuth as a coating material for simultaneous determination of cadmium (Cd) and lead (Pb) in 0.1 M $HNO_3$ solution by anodic stripping voltammetry (ASV). The use of a square-wave voltammetric potential between a working electrode and a reference electrode caused Cd and Pb ions deposited on the electrode surface to be oxidized, thereby generating electric currents at different potentials. The mercury-coated gold electrode was not sensitive enough to detect the usable range of Cd concentrations (1 to 100 ppb). The GC electrodes with mercury or bismuth displayed well-defined, sharp and separate current peaks for Cd and Pb ions when the square-wave voltammetric potentials were applied. The peak currents measured with both mercury- and bismuth- coated GC electrodes were linearly proportional to Cd and Pb concentrations in the range of 1 to 200 ppb in 0.1 M $HNO_3$ with strong linear relationships between concentration and peak current ($R^2$ > 0.95), indicating that both of Cd and Pb ions could be quantitatively measured.

• Journal of Soil and Groundwater Environment
• /
• v.17 no.6
• /
• pp.69-81
• /
• 2012

Diverse geostatistical tools such as kriging have been used to estimate the volume and spatial coverage of contaminated soil needed for remediation. However, many approaches frequently yield estimation errors, due to inherent geostatistical uncertainties. Such errors may yield over- or under-estimation of the amounts of polluted soils, which cause an over-estimation of remediation cost as well as an incomplete clean-up of a contaminated land. Therefore, it is very important to use a better estimation tool considering uncertainties arising from incomplete field investigation (i.e., contamination survey) and mathematical spatial estimation. In the current work, as better estimation tools we propose stochastic simulation approaches which allow the remediation volume to be assessed more accurately along with uncertainty estimation. To test the efficiency of proposed methods, heavy metals (esp., Pb) contaminated soil of a shooting range area was selected. In addition, we suggest a quantitative method to delineate the confident interval of estimated volume (and spatial extent) of polluted soil based on the spatial aspect of uncertainty. The methods proposed in this work can improve a better decision making on soil remediation.

• Journal of Environmental Health Sciences
• /
• v.46 no.1
• /
• pp.88-95
• /
• 2020

Object: The purpose of this study was to select priority points for soil management using the location of groundwater and to suggest this method for soil contamination surveys. Method: Groundwater impact range was set to an area of 100 to 500 meters from the center point of agricultural groundwater wells. Data on industrial complex and factory areas, areas of stored or used ores and scrap metals, areas associated with waste and recycling, and traffic-related facilities areas were collected and checked for whether they fall within the groundwater impact range. Longitude and latitude coordinates of these data were mapped on the groundwater impact range using QGIS (Quantum Geographic Information System). Results: Considering the groundwater impact range, the points were selected as follows: 589 points were selected from 6,811 factories and 259 points were selected from 1,511 recycling business points. Traffic-related facility areas were divided between gas stations, bus depots, and auto mechanics. Thirty-four points were selected from 149 bus depots and 573 points were selected from 6,013 auto mechanic points. From the 2,409 gas station points, 323 were selected. Conclusion: Contaminated soil influences groundwater and crops, which can harm human health. However, soil pollution is not easily identified, so it is difficult to determine what has occurred. Pollution must be prevented beforehand and contaminated soil found. By selecting and investigating soil contamination survey points in consideration of the location of groundwater wells, we can safely manage water resources by preventing groundwater contamination in advance.

• Journal of Environmental Impact Assessment
• /
• v.12 no.3
• /
• pp.199-209
• /
• 2003

The withdrawal method for protecting the uncontaminated part from the spread of contaminants was suggested by a simultaneous equation. The formulation of them is based upon the build up of the ridge part between the contaminated and uncontaminated parts that resulted from the efficient use of barrier wells. The quality in the withdrawn groundwater depends upon the heads at wells no. 5 and 6. The determination of pumping rates and qualities with changing the heads at wells no. 5 and 6 should be given by considering the demand for water use and the capacity and cost for removing the contained contaminants. The results of this study should be used in taking a plan for supplying water use as well as preventing the spread of contaminants from some known contaminated sources.