• 유기물자원화
• /
• 제11권4호
• /
• pp.90-96
• /
• 2003

본 연구에서는 유류로 오염된 현장 주유소를 대상으로 토양증기추출 공정 적용시 연속추출과 간헐추출 운전의 효율성을 검토하였다. 공기주입 후 압력을 측정한 결과 동일 조건에서도 공기주입정 헤드(head) 압력이 상이하게 나타나 실험부지내 토양이 매우 불균일하다는 것을 알 수 있었다. 간헐식은 1시간 가동 후 3시간 정지시켰으며, 연속식은 50분 가동 후 10분 휴지하는 것을 연속추출한 것으로 가정하였다. 송풍기의 용량은 $1m^3/min$이었다. 추출모드의 영향실험은 오염농도가 심한 두 지점을 선정하여 실시하였으며, 48시간 동안 온라인 모니터링으로 측정한 TPHgas 농도를 적산하여 비교한 결과 1시간 가동 후 3시간 휴지한 간헐추출모드가 연속추출모드보다 높게 나타났다. 일반적으로 토양증기추출 공정이 장기간 가동된다는 점을 고려한다면 오염가스 휘발량, 전력비용, 그리고 시설의 감가상각비 등에서 볼 때 간헐추출모드로 운전하는 것이 연속추출모드 보다 더 유리할 것으로 판단된다.

• KSBB Journal
• /
• 제16권6호
• /
• pp.632-637
• /
• 2001

본 실험에서 사용된 균주는 유류에 오염된 지역의 토양시료로부터 직접 분리하였는데 본 실험에서는 백색 콜로니를 형성하는 W균주와 황색 콜로니를 형성하는 Y균주 그리고 두 균주의 복합균주인 WY 균주를 사용하였다. 단일 균주보다는 복합균주를 사용하였을 때 디젤유의 분해가 더 효과적이었으며 질소원의 첨가가 분해에 제한인자로 작용하였다. 비록 토양시스템의 분해효율은 액체상에서의 분해능에 비해 다소 떨어지지만, 통기의 조건 및 질소원의 첨가등으로 그 능력을 어느 정도 향상시킬 수 있었다. 한편 디젤유의 분해에는 생물학적인 측면 뿐 아니라 증발이나 휘발에 의해서도 상당량 감소하였는데 교반에 의해 또 오염토양의 제조공정중에 상당량이 휘발하는 것으로 보이며, 디젤의 용해도가 낮기 때문에 침출되는 양도 적을 것이라고 보여지고 이는 다른 논문에서도 보고된 바 있다(21, 22) 앞서 언급한 것처럼 본 실험에서는 통기와 질소원의 첨가를 통해 미생물에 의한 디젤유의 분해능을 향상시켰는데, 이 뿐만 아니라 더욱 효과적인 디젤유의 분해를 위해서는 복잡한 토양시스템에 관계된 여러 요소들을 최적화하여 분해능을 향상시키기 위한 실험이 수행되어야한다.

• Tribology and Lubricants
• /
• 제33권6호
• /
• pp.263-268
• /
• 2017

The significance of maintaining the soil environment is gradually increasing owing to soil and underground water contamination by petroleum leak accidents. However, the purification of soil is an expensive and more time-consuming process than the purification of contaminated water and air. Moreover, determining the source and people responsible for soil pollution gets often embroiled in legal conflicts, further delaying the cleanup process of the contaminate site. Generally, TPH (total petroleum hydrocarbon) pattern analysis is used to determine the petroleum species and polluter responsible for soil contamination. However, this process has limited application for petroleum products with a similar TPH pattern. In this study, we analyze the TPH pattern and specific sectional ratio (${\sim}C_{10}$, $C_{10}-C_{12}$, $C_{12}-C_{36}$, and $C_{36}{\sim}$) of various domestic petroleum products to identify the petroleum product responsible for soil contamination. Also, we perform BTEX (benzene, toluene, ethyl benzene, xylene) quantitative analysis and determine B:T:E:X ratio using GC-MS. The results show that gasoline grade 1 and 2 have a similar TPH pattern but different BTEX values and ratios. This means that BTEX analysis can be used as a new method to purify soil pollution. This complementary TPH and BTEX method proposed in this study can be used to identify the petroleum species and polluters present in the contaminated soil.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제24권1호
• /
• pp.17-23
• /
• 2019

Clean soil environment is of crucial importance to sustain lives of ecosystem and humans. With rapid industrialization, there has been a great increase of soil contamination by accidental releases of petroleum products. In general, soil remediation is an expensive and time-consuming process as compared to cleanup of water and air. Moreover, determining the source and responsible parties of soil pollution often turns into legal conflicts and that further delay the cleanup process of contaminated sites. In practice, total petroleum hydrocarbon (TPH) analysis has been employed to determine the petroleum species and to track down the responsible polluters. However, this approach often suffers from differentiating similar TPH species. In this study, we analyzed TPH chromatogram patterns of 24 domestic petroleum products in specific carbon ranges (${\sim}C_{10}$, $C_{10}-C_{12}$, $C_{12}-C_{36}$, and $C_{36}{\sim}$) and the fractional changes of THP ratio in the mixture products of gasoline, kerosene and diesel. The proposed TPH analysis method in this study could serve as a useful tool to better analyze the petroleum species in soils contaminated with complex oil mixtures, and ultimately be used to identify the polluters of soil.

• 한국디지털건축인테리어학회논문집
• /
• 제11권1호
• /
• pp.5-13
• /
• 2011

This research proposed the space planing methode and diagrams of restaurant kitchens to improve hygiene by analyzing the related contents collected from books and researches in interior design and HACCP (Hazard Analysis and Critical Control Point). HACCP is an effective and scientific hygiene system for food safety in order to prevent cross-contamination from food hazards. Based on the analyses, improvement of food production environments like restaurant kitchens is necessary for food hygiene. The space planing methode of restaurant kitchens to improve hygiene are followings: The circulation planing is that the direction of movement of the food, workers, waste, and dishes should be fractionated and managed for cross-contamination prevention. The space separation planing is that the spaces in the kitchen should be classified and divided into contaminated area and non-contaminated and clean area depending on the degree of cleanliness. The zoning is space arrangement with feed-back process to check the possible points of cross-contamination and correct space arrangement until the possibility of cross-contamination disappear in kitchen. However, if cross-contamination is unavoidable in some points in restaurant kitchens, hygiene facilities such as washing rooms, pass rooms, and double doors with air-shower should be located in order to remove contamination.

• 대한기계학회논문집B
• /
• 제27권12호
• /
• pp.1772-1780
• /
• 2003

An optimal soot blowing system has been developed for an optimal operation of power utility boilers by both minimization of the use of steam and the number of soot blowers worked during soot blowing. Traditionally, the soot blowing system has been operated manually by operators. However, it causes the reduction of power and thermal performance degradation because all soot blowers installed in the plant should be worked simultaneously even there are lots of tubes those are not contaminated by slagging or fouling. Heat transfer area is divided into four groups, furnace, convection area including superheater, reheater and economizer, and air preheater in the present study. The condition of cleanness of the tubes is calculated by several parameters obtained by sensors. Then, a part of soot blowers works automatically where boiler tubes are contaminated. This system has been applied in a practical power plant. Therefore, comparison has been done between this system and manual operation and the results are discussed.

• Journal of Korean Biological Nursing Science
• /
• 제15권2호
• /
• pp.74-81
• /
• 2013

Purpose: This study was conducted to explore the health effects of exposure to oil-contaminated water in G village near the area of Daecheon beach on which air force had test fired. Methods: Eighty residents consented and were divided into three groups; 33 residents(drinking well water and still living there), 23 residents(drinking well water but do not live there any more), and 24 residents(did not drink well water but live there now: control group). Data were collected from August to September, 2010 from the survey questionnaires, general health examination, specific functional test, and biological marker tests. Results: Current residents showed higher levels of body mass index, blood pressure, and fasting blood glucose that are related to adult diseases. 64 participants received specific test for cancer. Only one person had esophageal cancer. Perchloroethylene was not found in the Urine Samples. Current residents showed a higher level of 8-hydroxydeoxyguanosine, an indicator of oxidative damage, and there was a statistically significant difference after correcting the confounding variables. Conclusion: We need education programs for managing the risk factors that are related to adult diseases in people who are now living in this village. We also need to expand further studies for investigating oxidative damage indicators.

• Journal of Radiation Protection and Research
• /
• 제38권4호
• /
• pp.234-236
• /
• 2013

비밀봉 방사성물질을 취급하는 시설에서 이들 물질에 의한 작업환경의 다소간의 오염은 피할 수 없다. 오염의 우려가 있는 작업환경에서 오염관리의 일차적인 목적은 방사성물질의 잠재적 체내섭취로 인한 영향이다. 본 논문은 보수적 가정과 간단한 계산에 의거하여 공기오염에 따른 방사성물질의 공기중 농도와 흡입에 의한 연간 섭취량을 산출한 후, 관련 고시에서 정하는 유도공기중농도와 연간섭취한도와 비교함으로써 종사자의 내부피폭 정도를 평가하는 절차를 제공한다. 제시된 절차는 공기중 방사성물질 측정 및 내부피폭 감시의 필요성, 적합한 방호용구의 착용, 배기설비 설계를 위한 정보 획득 등 공기오염과 종사자의 내부피폭 감시를 위한 실무적 요건을 판단할 목적으로 활용될 수 있다.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2016년도 추계학술대회
• /
• pp.549-551
• /
• 2016

과학기술의 발전에 따라 현대인들은 실외보다는 실내공간에 머무르는 시간이 과거에 비해 훨씬늘어 나고 있다. 최근까지도 실외 대기환경에 대해서는 매우 다양한 연구와, 개선 노력이 진행 중에 있으나 실내에서의 공기의 질 문제는 상대적으로 가볍게 여겨져 온 것이 사실이다. 실내공기의 오염은 자연적인 희석률이 큰 실외 대기환경의 오염과 달리, 희석률이 매우 낮아 한번 오염된 공기가 지속적으로 순환되면서 실내에 머무르고 있는 사람의 건강에 매우 나쁜 영향을 끼친다. 본 연구에서는 실내에서 거주하는 사람의 이동특성, 생활 형태를 반영한 능동적 실내환경 제어체계에 대한 연구를 위하여 실시간으로 측정된 공기의 질을 측정하여 사용자의 스마트기기로 정보를 전송하는 공기측정기장치 알람봇과 운영 어플리케이션을 구현 하였다.

• 한국전기전자재료학회논문지
• /
• 제24권12호
• /
• pp.996-1001
• /
• 2011

A bushing is very important because it must supply the high voltage to the power equipment. Generally, the surface of bushing is contaminated with rain, dust, salt and others. A bushing with contaminations at air are serious problem in insulation. Therefore, it is important to understand the inspection and diagnoses of the safety. The ultra-violet rays(UV) camera has attracted interest from the view point of easy judgement. In this paper, we will report on the corona discharge characteristics on bushing model with contaminations. Also, UV images of discharge in air are analyzed using prototype UV camera of Korea. These results are studied at both AC and DC voltage under a non-uniform field.