• Korean Journal of Environmental Agriculture
• /
• v.33 no.4
• /
• pp.271-281
• /
• 2014

BACKGROUND: Application of the transfer functions derived from local soil data is necessary in order to develop proper management protocols for agricultural soils contaminated with heavy metals through phytoavailability control of the heavy metals. The aim of this study was to derive the transfer functions of Korean agricultural soils affected by the abandoned mining sites and evaluate suitability of the derived transfer functions. METHODS AND RESULTS: 142 agricultural soils affected by the abandoned mining sites were collected and analyzed. Two extraction methods, including 1 M $NH_4NO_3$ extraction and 0.01 M $Ca(NO_3)_2$ extraction were applied to determine phytoavailable metal pools in soils. Multiple stepwise regression of phytoavailable metal pools against the corresponding total metal concentration and soil properties was conducted to derive suitable transfer functions for estimating phytoavailable heavy metal pools. Applicability of the derived transfer functions was examined by calculating NME and NRMSE. CONCLUSION: Soil pH and organic matter were valid variables for derivation of the transfer functions which were applicable for estimating phytoavailable metal concentrations in the soils being contaminated by heavy metals. In addition, it was confirmed that transfer functions need to be developed based on local soil conditions to accurately estimate heavy metal-phytoavailability.

• Journal of Soil and Groundwater Environment
• /
• v.10 no.2
• /
• pp.1-11
• /
• 2005

This study applied EK method to remediate contaminated soil by lead (Pb), tried increasing efficiency of remediation using adsorbent (apatite and zeolite) as enhanced EK remediation method to overcome the limit of traditional EK remediation method. Adsorption tests on Pb were practiced to extract EK, making different concentration of contaminated soil, voltage condition, operating time etc., transferring Pb-ion into the position of adsorbent, then tried immobilization. On this results, the efficiency of remediation is different on its test conditions. In addition, the efficiency of remediation was not only improved by adding electrode revεrsal and install position of adsorbent but also satisfied TCLP regulation of EPA in USA through the whole sample range. Finally, absorption and immobilization capacity of apatite and zeolite proved on its excellence and confirmed the possibility of application of apatite and zeolite as enhanced EK remediation method.

• Journal of Soil and Groundwater Environment
• /
• v.11 no.3
• /
• pp.1-11
• /
• 2006

Attempts were made to analyze the national policy of soil contamination prevention and management of inactive or abandoned metal (IAM) mines in Korea. This approach focused on legal systems and legislation, remediation technology development, and the arrangement or distribution of budgets pertaining to national policy since the mid 1990's. Prevention of Mining Damage and Recovery Act enacted. Defines the roles, responsibility and budget of the government when recovering mine damages. However, in 2005 there still remains to improve the national policy of soil contamination prevention and management of IAM mines. Analysis of national and industrialized foreign countries including the United States, the United Kingdom, and the Netherlands suggest the following improvements: i) arranging distinct regulations between strict and non-strict liability criteria for potentially responsible parties; limiting innocent and non-strict liability depending on the period of incurred mining activity, ii) enhancing participation of local communities by enforcing law and legislation, iii) establishing a national database system of (potentially) IAM contaminated sites based on the Website-Geographic Information System, iv) carrying out site-specific risk assessments and remediation of IAM contaminated sites, v) preparation and distribution of clean-up fund at mine sites adequately, and vi) technology development for the cleaning of IAM contaminated sites; awarding positive incentives of a legal nature for participants applying newly developed technology in IAM mines.

• Applied Chemistry for Engineering
• /
• v.23 no.6
• /
• pp.618-623
• /
• 2012

The significance of soil environment has been gradually increased because of petroleum leak accidents. Comparing with wastewater clean treatments and air pollutant controls, the soil purification requires a long-term process and it is very expensive. In this study, we analyzed the physicochemical properties of total petroleum hydrocarbon (TPH) contaminated in soil. This could be applied to deciding the source of petroleum when a soil contamination accident occurs.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2005.10a
• /
• pp.49-51
• /
• 2005

• Journal of Soil and Groundwater Environment
• /
• v.14 no.4
• /
• pp.15-22
• /
• 2009

The remediation efficiency for a large scale petroleum-contaminated site was evaluated by using the Engineered Land-farming system which was consists of the following parameters; moisture & nutrient injector data, blower system, HDPE sheet and sump system. To enhance the degradation ability in the early stage, main nutrients such as nitrogen (N) and phosphorus (P) were adjusted for the site condition. As a result of the periodic tilling process, the concentration of contaminated soil was decreased to 348 mg/kg, which was lower than 500 mg/kg (regal standards) while satisfying remediation Efficiency of 82% (the maximum concentration of 1,893 mg/kg). The appropriate temperature range for an active operation was investigated between $28.9{\sim}35.6^{\circ}C$. For the contaminated soils having different initial concentration, the TPH (Total Petroleum Hydrocarbons) concentration was decreased evenly along with the CFU (Colony Forming Unit), moisture content and contaminant concentration after 38days of gratifying the legal standards of under 500 mg/kg.

• Journal of Environmental Science International
• /
• v.32 no.9
• /
• pp.627-634
• /
• 2023

Tire wear particles(TWPs), regarded as a microplastic, is generated in significant quantities each year and exist in various spaces and have a negative impact on the surrounding environment. Particularly, roadside environments fall within the direct influence of TWPs, necessitating proactive investigation for contamination management and response. Therefore, this study aimed to investigate the soil acidity and electrical conductivity(EC) and TWPs in the roadside soil of six sites based on traffic volume. The analysis revealed that the soil in all sites exhibited subacidity, and there were no significant differences in EC. Microscopic and FT-IR analysis revealed the presence of microscopic particles in soil samples that exhibited common visual characteristics of TWPs. In the road with the highest traffic volume, 48,300 TWPs were detected per unit area. Furthermore, a proportional relationship between traffic volume and TWPs particles was established. However, influences other than traffic volume on TWPs particle count within the soil were observed. Therefore, for the management of TWPs contaminated roadside soil, a proactive response is necessary in areas with high traffic volumes. However, in order to effectively address the factors contributing to the generation and dispersion of TWPs, further research is required with a multidimensional approach.

• Journal of environmental and Sanitary engineering
• /
• v.18 no.4
• /
• pp.6-14
• /
• 2003

A spring water quality was depend on the aquifer soil status. However, water quality was rapidly contaminated by artificial affects. In the contaminate components, the heavy metals were significantly important because the heavy metals influence the plants and the animals. But, it is difficult to find out how the heavy metal can affect in the water quality. According to the group analysis and the factor analysis, water quality management was advanced. The experimental area was divided into three region and six factor. The six factor could not define the overall water quality, however this method were one of the useful methods.

• Journal of Environmental Science International
• /
• v.17 no.7
• /
• pp.795-799
• /
• 2008

We have studied bioremediation of effective microorganisms on crude oil spill in Taean, west-coast of Korea. Oil contaminated soil samples were collected on December 14, 2007, seven days after the Hebei Spirit oil-spilled accident. Total petroleum hydrocarbon (TPH) was measured to evaluate the effectiveness of effective microorganisms (EM) which were composed with yeast, photosynthetic bacteria and lactic acid bacteria on oil degradation. TPH concentration before EM treatment was 323.8 mg/kg, whereas TPH concentrations on 2 days after EM treatment and that of control (without EM) was 102.1 mg/kg and 170.6 mg/kg, respectively. On six days after EM treatment TPH was 91.3 mg/kg and that of control was 127.7 mg/kg. Percentages of degraded crude oil were 47.3% without EM and 68.5% with EM, 60.6% without EM and 71.8% with EM on 2 and 6 days after EM treatment, respectively. These results clearly showed that the application of effective microorganisms toward oil-contaminated soil was quite useful to degrade crude oil spill. These results were derived from the effects of biostimulation of microbial media nutrients and bioaugmentation of effective microorganisms. If we carefully apply these effective microorganisms, it can be a useful bioremediation method to recover oil-contaminated marine ecosystems.

• Journal of Soil and Groundwater Environment
• /
• v.14 no.1
• /
• pp.61-67
• /
• 2009

A non-discharged system of sequentially physico-chemical water treatment was used to treat the contaminated water produced from washing system of soils according to full-scale soil washing. After washing the TPH contaminated soils, the remaining concentrations of COD$_{Mn}$, SS, and n-hexane were analyzed for each compartment to estimate the treatment efficiencies of non-discharged system. Three times of sampling events were conducted for 4 different compartments (sediment tank, flocculation tank, oil/water separator, and process-water tank). In addition, soil washing efficiencies and concentrations of each parameter (COD$_{Mn}$, SS, and n-hexane) for process-water tank were analyzed for about 8 months. As results, the average efficiency of soil washing was high to have 95.9%, regardless of the condition of TPH contamination level for soils, as well as the concentrations of COD$_{Mn}$, SS, and n-hexane in the process-water tank were below the regulation limits of the Water Environmental Conserveation Act. Accordingly, the full-scale washing treatment system in this study could make the washing water 100% recycled which lead the system to be environmentally-friendly and economical.